Evaluation of asymmetric poly(vinylidene fluoride)-coated polyimide separator with three-dimensionally homogeneous microporous structure for high-safety lithium-ion battery

Abstract

Safety hazards associated with separators in lithium-ion batteries are more pronounced in light of the significant improvement of energy density of batteries, hindering their wide application. In this research, asymmetric poly (vinylidene fluoride) (PVDF)-coated polyimide separators with three-dimensionally homogeneous microporous (3DHM API/PVDF) structure are prepared, in which a PVDF layer with a thickness of 6 μm on one side of polyimide. Polyimide, as the base film, has a high heat-resistant temperature which ensures that as-prepared separators will not be shrunk and burned. The coated PVDF layer imparts 3DHM API/PVDF with thermal shutdown function at 175 °C due to the melting of PVDF. The temperature difference between the shutdown and meltdown temperature is over 100 °C, ensuring that the LIB assembled with 3DHM API/PVDF is safe for use. Moreover, the interconnected microporous structure of the separator facilitates the formation of 3D Li⁺ transport pathways and uniformity of lithium deposition, suppressing lithium dendrite growth. The coin cells assembled by 3DHM API/PVDF exhibit similar electrochemical performance to that of a commercial polypropylene separator at room temperature. Therefore, the novel 3DHM API/PVDF separator may be a promising candidate for a significantly safer LIB.

Keywords

Composite separator / flame resistance / shutdown function / functional polymeric coating / three-dimensionally homogeneous microporous structure / lithium-ion battery

References

[1] Scrosati B.Lithium batteries: status, prospects and future.J Power Sources2010;195:2419-30

[2] Tian X,Fang B.Design strategies of safe electrolytes for preventing thermal runaway in lithium ion batteries.Chem Mater2020;32:9821-48

[3] Cho T,Ohnishi H.Composite nonwoven separator for lithium-ion battery: development and characterization.J Power Sources2010;195:4272-7

[4] Kim M.Inorganic thin layer coated porous separator with high thermal stability for safety reinforced Li-ion battery.J Power Sources2012;212:22-7

[5] Cheng XB,Zhao CZ,Zhang JG.A review of solid electrolyte interphases on lithium metal anode.Adv Sci2016;3:1500213

[6] Zheng G,Liang Z.Interconnected hollow carbon nanospheres for stable lithium metal anodes.Nat Nanotechnol2014;9:618-23

[7] Ma F,Yan W.Solid polymer electrolyte based on polymerized ionic liquid for high performance all-solid-state lithium-ion batteries.ACS Sustain Chem Eng2019;7:4675-83

[8] Chen D,Zhou X,Hou H.Electrospinning fabrication of high strength and toughness polyimide nanofiber membranes containing multiwalled carbon nanotubes.J Phys Chem B2009;113:9741-8

[9] Dong G,Tian G,Wu D.Robust polyimide nanofibrous membrane with bonding microstructures fabricated via dipping process for lithium-ion battery separators.Energy Technol2019;7:1801072

[10] Dong G,Sun G,Qi S.TiO₂ nanoshell@polyimide nanofiber membrane prepared via a surface-alkaline-etching and in-situ complexation-hydrolysis strategy for advanced and safe LIB separator.J Membr Sci2019;577:249-57

[11] Dong G,Liu B,Qi S.Ultrathin inorganic-nanoshell encapsulation: TiO₂ coated polyimide nanofiber membrane enabled by layer-by-layer deposition for advanced and safe high-power LIB separator.J Membr Sci2020;601:117884

[12] Elia GA,Sotta D.Polyacrylonitrile separator for high-performance aluminum batteries with improved interface stability.ACS Appl Mater Interfaces2017;9:38381-9

[13] Liu J,Yang W,Li F.Lithium ion battery separator with high performance and high safety enabled by tri-layered SiO₂@PI/m-PE/SiO₂@PI nanofiber composite membrane.J Power Sources2018;396:265-75

[14] Shi C,Shen X.A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al₂O₃ particles for lithium-ion batteries.J Membr Sci2016;517:91-9

[15] Zhu C,Shi J.Enhanced wettability and thermal stability of a novel polyethylene terephthalate-based poly(vinylidene fluoride) nanofiber hybrid membrane for the separator of lithium-ion batteries.ACS Appl Mater Interfaces2017;9:26400-6

[16] Battery properties of Li-ion battery with non-woven fabric separators. The 51th Battery Symposium in Japan, Nagoya 2010, 1b25.

[17] Nishikawa S. Characterization of aramid coated fine porous pe separator. The 47th Battery Symposium in Japan, Tokyo 2006, 2e06.

[18] Jung YS,Gedvilas L.Improved functionality of lithium-ion batteries enabled by atomic layer deposition on the porous microstructure of polymer separators and coating electrodes.Adv Energy Mater2012;2:1022-7

[19] Jiang W,Kong Q.A high temperature operating nanofibrous polyimide separator in Li-ion battery.Solid State Ion2013;232:44-8

[20] Sun G,Niu H.In situ welding: superb strength, good wettability and fire resistance tri-layer separator with shutdown function for high-safety lithium ion battery.J Membr Sci2020;595:117509

[21] Tan J,Qiu Z.Flexible, high-wettability and thermostable separator based on fluorinated polyimide for lithium-ion battery.J Solid State Electrochem2018;22:3363-73

[22] Wu D,Huang S.Electrospun nanofibers for sandwiched polyimide/poly (vinylidene fluoride)/polyimide separators with the thermal shutdown function.Electrochim Acta2015;176:727-34

[23] Zhang H,Zhou M,Zhu B.High thermal resistance polyimide separators prepared via soluble precusor and non-solvent induced phase separation process for lithium ion batteries.Electrochim Acta2016;187:125-33

[24] Lu Z,Miao Y.Polyimide separators for rechargeable batteries.J Energy Chem2021;58:170-97

[25] Zhang C,Wang S.A polyethylene microsphere-coated separator with rapid thermal shutdown function for lithium-ion batteries.J Energy Chem2020;44:33-40

[26] Wang B,Wang H.Macroporous materials: microfluidic fabrication, functionalization and applications.Chem Soc Rev2017;46:855-914

[27] Ma D,Wang H,Wang L.Three-dimensionally ordered macroporous FeF₃ and its in situ homogenous polymerization coating for high energy and power density lithium ion batteries.Energy Environ Sci2012;5:8538-42

[28] Hatton B,Davis S,Aizenberg J.Assembly of large-area, highly ordered, crack-free inverse opal films.Proc Natl Acad Sci USA2010;107:10354-9 PMCID:PMC2890797

[29] Phillips KR,Sunny S.A colloidoscope of colloid-based porous materials and their uses.Chem Soc Rev2016;45:281-322

[30] Stein A,Rudisill SG.Design and functionality of colloidal-crystal-templated materials-chemical applications of inverse opals.Chem Soc Rev2013;42:2763-803

[31] Lee H,Toprakci O,Zhang X.A review of recent developments in membrane separators for rechargeable lithium-ion batteries.Energy Environ Sci2014;7:3857-86

[32] Laman FC,Denovan J.Impedance studies for separators in rechargeable lithium batteries.J Electrochem Soc1993;140:L51-3

[33] Abraham K.Directions in secondary lithium battery research and development.Electrochim Acta1993;38:1233-48

[34] Zhang SS.A review on the separators of liquid electrolyte Li-ion batteries.J Power Sources2007;164:351-64

[35] Wu D,Xu Z.Polyethylene terephthalate/poly (vinylidene fluoride) composite separator for Li-ion battery.J Phys D Appl Phys2015;48:285305

[36] Cheng XB,Huang JQ,Zhao CZ.Dual-phase lithium metal anode containing a polysulfide-induced solid electrolyte interphase and nanostructured graphene framework for lithium-sulfur batteries.ACS Nano2015;9:6373-82

[37] Ju Z,Wang Y.Biomacromolecules enabled dendrite-free lithium metal battery and its origin revealed by cryo-electron microscopy.Nat Commun2020;11:488 PMCID:PMC6981142

[38] Li H,Ha H.An all-stretchable-component sodium-ion full battery.Adv Mater2017;29:1700898