C₆₀ and ZIF-67 synergistically modified gelatin-based nanofibrous separators for Li-S batteries

Abstract

The lithium-sulfur (Li-S) battery has been attracting much more attention in recent years due to its high theoretical capacity and low cost, although various issues, such as the “shuttle effect” and the low use ratio of active materials, have been hindering the development and application of Li-S batteries. The separator is an important part of Li-S batteries, and its modification is a simple and effective strategy to improve the electrochemical performance of Li-S batteries. In this work, we explore separators with different functions on their two sides that have been produced by a step-by-step electrospinning method. The multifunctional separator on one side is pure gelatin, and the other side is zeolitic imidazolate framework-67 (ZIF-67)-C₆₀-gelatin. The ZIF-67-C₆₀-gelatin layer on the cathode side is of great importance. The chemisorption sites on it are provided by ZIF-67, and the transformation sites of lithium polysulfide are provided by C₆₀. Gelatin, which is on the anode side, as an admirable separator material, makes the lithium flux uniform and thus prevents the generation of lithium dendrites. This type of multifunctional nanofiber separator based on double gelatin layers plays an important role in the adsorption and conversion of polysulfides, and it improves the overall performance of the Li-S battery. As a result, the Li-S batteries assembled with the prepared separator can still maintain the capacity of 888 mAh g^-1 after 100 cycles at 0.2 C, and the capacity retention rate of the Li-S batteries is 72.9% after 400 cycles at 2 C. This simple preparation method and high-performance bilayer membrane structure provide a new route for commercial application.

Keywords

Gelatin-based / electrostatic spinning / modified separator / Li-S battery

References

[1] Jiang L,Pan P.Excimer ultraviolet-irradiated graphene separator for suppressing polysulfide shuttling in Li-S batteries.J Alloys Compd2022;903:163932

[2] Zhang L.Electrolyte solvation structure as a stabilization mechanism for electrodes.Energy Mater2022;1:100004

[3] Yu Z,Ma L.Revealing the sulfur redox paths in a Li-S battery by an In situ hyphenated technique of electrochemistry and mass spectrometry.Adv Mater2022;34:e2106618

[4] Huang CJ,Tao HC.Decoupling the origins of irreversible coulombic efficiency in anode-free lithium metal batteries.Nat Commun2021;12:1452 PMCID:PMC7933276

[5] Zheng S,Ouyang Y.Metal-organic framework decorated polymer nanofiber composite separator for physiochemically shielding polysulfides in stable lithium-sulfur batteries.Energy Fuels2021;35:19154-63

[6] Chadha U,Padmanaban S.Review - contemporary progresses in carbon-based electrode material in Li-S batteries.J Electrochem Soc2022;169:020530

[7] Suzanowicz AM,Lin H,Segre CU.A new graphitic nitride and reduced graphene oxide-based sulfur cathode for high-capacity lithium-sulfur cells.Energies2022;15:702

[8] Zhong X,Sheng J.Freestanding and sandwich mxene-based cathode with suppressed lithium polysulfides shuttle for flexible lithium-sulfur batteries.Nano Lett2022;22:1207-16

[9] Wei Z.Chemically etched CeO_2-x nanorods with abundant surface defects as effective cathode additive for trapping lithium polysulfides in Li-S batteries.J Colloid Interf Sci2022;615:527-42

[10] Chen X,Chen W.In situ protection of a sulfur cathode and a lithium anode via adopting a fluorinated electrolyte for stable lithium-sulfur batteries.Sci China Mater2021;64:2127-38

[11] Wang Q,Wu J,Liu W.Advanced electrolyte design for stable lithium metal anode: from liquid to solid.Nano Energy2021;80:105516

[12] Paul PP,Colclasure AM.A review of existing and emerging methods for lithium detection and characterization in Li-ion and Li-metal batteries.Adv Energy Mater2021;11:2100372

[13] Balaish M,Kim KJ,Hood ZD.Processing thin but robust electrolytes for solid-state batteries.Nat Energy2021;6:227-39

[14] Hu W,Yang X.Sulfophenylated poly (ether ether ketone ketone) nanofiber composite separator with excellent electrochemical performance and dimensional thermal stability for lithium-ion battery via electrospinning.Macromol Mater Eng2021;306:2100118

[15] Aslam MK,Hussain S.Effects of catalysis and separator functionalization on high energy lithium sulfur batteries: a complete review.Energy Environ Mater2022;Online ahead of print:

[16] Xiang H,Deng N,Kang W.A novel EDOT/F co-doped PMIA nanofiber membrane as separator for high-performance lithium-sulfur battery.Chem Asian J2022;17:e202200669

[17] Zhou C,Li Z.A robust electrospun separator modified with in situ grown metal-organic frameworks for lithium-sulfur batteries.Chem Eng J2020;395:124979

[18] Zhao J,Zhang X.In situ interfacial polymerization of lithiophilic COF@PP and POP@PP separators with lower shuttle effect and higher ion transport for high-performance Li-S batteries.Chem Eng J2022;442:136352

[19] Liang X,Wang Y,Sun Y.Constructing multi-functional composite separator of PVDF-HFP/h-BN supported Co-CNF membrane for lithium-sulfur batteries.Sustain Energy Fuels2022;6:440-8

[20] Zhu L,Ran W.Turning biomass waste to a valuable nitrogen and boron dual-doped carbon aerogel for high performance lithium-sulfur batteries.Appl Surf Sci2019;489:154-64

[21] Jing W,Zou K.Sandwich-like strontium fluoride graphene-modified separator inhibits polysulfide shuttling and lithium dendrite growth in lithium-sulfur batteries.J Mater Chem A2022;10:4833-44

[22] Han Y,Zhang S,Ramakrishna S.Progress of improving mechanical strength of electrospun nanofibrous membranes.Macromol Mater Eng2020;305:2000230

[23] Jiang W,Ding Y.Sepiolite and ZIF-67 co-modified PAN/PVdF-HFP nanofiber separators for advanced Li-ion batteries.Nanotechnology2022;33:425601

[24] Li B,Luo B.MOF-derived NiCo₂S₄@C as a separator modification material for high-performance lithium-sulfur batteries.Electrochim Acta2020;344:135811

[25] Huang S,Yang Y,Ye M.Transition metal phosphides: new generation cathode host/separator modifier for Li-S batteries.J Mater Chem A2021;9:7458-80

[26] Wang Y,Wang J,Yu J.Enhanced chemisorption and catalytic conversion of polysulfides via CoFe@NC nanocubes modified separator for superior Li-S batteries.Chem Eng J2022;433:133792

[27] Wei Z,Sokolowski J,Wu G.Mechanistic understanding of the role separators playing in advanced lithium-sulfur batteries.InfoMat2020;2:483-508

[28] Li C,Xiao Y,Zhang H.Recent progress of separators in lithium-sulfur batteries.Energy Stor Mater2021;40:439-60

[29] Chen M,Fu X.A Janus protein-based nanofabric for trapping polysulfides and stabilizing lithium metal in lithium-sulfur batteries.J Mater Chem A2020;8:7377-89

[30] Chen M,Taylor ND,Zhong W.Rational design of graphite nanoplatelets interlayers via a surfactant-controlled strategy for enhancing lithium-sulfur batteries.ACS Sustain Chem Eng2019;7:15267-77

[31] Wu J,Lei Z.Pomegranate-like C₆₀@cobalt/nitrogen-codoped porous carbon for high-performance oxygen reduction reaction and lithium-sulfur battery.Nano Res2021;14:2596-605

[32] Zhao W,Chen J,Zhang L.Polar Co₃Se₄ nitrogen-doped porous carbon derived from ZIF-67 for use as a sulfur substrates in high-performance lithium-sulfur batteries.J Alloys Compd2022;923:166435

[33] Li Y,Li H.A freestanding flexible single-atom cobalt-based multifunctional interlayer toward reversible and durable lithium-sulfur batteries.Small Methods2020;4:1900701

[34] Xu W,Zhou H.Lychee-like TiO₂@TiN dual-function composite material for lithium-sulfur batteries.RSC Adv2020;10:2670-6