General Introduction
Engineering·High-Performance Manufacturing (Eng·HPM) is a peer-reviewed, open-access international journal. It is co-founded by the Chinese Academy of Engineering and Higher Education Press. The journal is dedicated to publishing high-quality, original research and authoritative reviews that advance the science, technology, and systems of high-performance manufacturing, spanning from fundamental principles to transformative industrial applications. Eng·HPM publishes articles in English and operates under a rigorous peer-review process to ensure scientific excellence, engineering relevance, and global impact.
Quick Checklist for Submission
Item | Requirement |
Type of Paper | Research Article: 5000–8000 words |
Review Article: Flexible length | |
Letter: ≤ 2000 words | |
Feature columns (Perspective, Commentary, etc.): ≤ 2000 words | |
Figures + Tables | Research Article: ~8 (combined total) |
Letter: ≤ 3 | |
Feature Columns: ≤ 2 | |
References | Appropriate number, consistent with article type |
Citations & References | Digital coding style. Group citations separated by comma or connected by hyphen. References listed in citation order. Journal names spelled out in full. An Endnote style file is provided. |
Running Title | Obligatory. Short version of the paper title (maximum 80 characters). |
Highlights | 3–5 bullet points; each ≤ 85 characters |
Graphical Abstract | Obligatory |
Abstract | 150–250 words |
Tables | Three-line table format |
Units | SI units preferred |
Copyright | CC BY license; copyright retained by authors |
Conclusion | Should not contain citations |
Numbering | Sections, subsections, equations numbered |
Maps | Not encouraged due to time required for audit in accordance with publication laws and rules. |
Manuscript Size | ≤ 40 MB |
Types of Articles
1. Research Article
Original, complete reports of significant advances in high-performance manufacturing science and engineering.
Total length (including figures, tables, and references): ≤ 8000 words.
2. Review Article
Comprehensive, critical reviews of emerging or rapidly developing areas relevant to high-performance manufacturing, including performance modeling, advanced processes, intelligent systems, and sustainable manufacturing.
Format and length are flexible. Authors are encouraged to contact the editors before submission.
3. Letter
Concise reports of timely and impactful findings of broad interest.
≤ 2000 words, at least 8 references, and up to 3 figures/tables.
4. Feature Columns
· NEWS: Timely reports on high-profile global developments in high-performance manufacturing science and engineering.
· COMMENTARY: Focused opinions on hot topics, policy implications, or technological trends.
· PERSPECTIVE: Brief, accessible articles that provide new insights or a forward-looking viewpoint on a timely topic, with some research context.
· Others: EDITORIAL, HIGHLIGHTS, and other invited content may also be published.
Ethics in Publishing (Duties of Authors)
a. Reporting standards
Authors should present an accurate account of the work performed and an objective discussion of its significance. Underlying data must be represented accurately. Articles must contain sufficient detail and references to allow others to replicate the work.
b. Data access and retention
Authors may be asked to provide raw data for editorial review and should be prepared to retain such data for a reasonable time after publication.
c. Originality and plagiarism
Submissions must be entirely original. Any form of plagiarism is unacceptable.
d. Concurrent submission
Manuscripts must not be under consideration or published elsewhere in substantially similar form.
e. Acknowledgement of sources
All sources must be properly cited. Private communications require written permission.
f. Authorship
Authorship should reflect substantial contributions. All authors must approve the final manuscript.
g. Safety, hazards, and ethical compliance
Unusual hazards or the use of human/animal subjects must be clearly stated, along with institutional approvals.
h. Errors in published work
Authors must promptly notify the journal of significant errors and cooperate in corrections or retractions.
Conflicts of Interest
All authors must disclose any financial or personal relationships that could be perceived as potential conflicts of interest.
Copyright Statement
All articles are published under the Creative Commons Attribution (CC BY 4.0) license.
Copyright remains with the authors. A signed copyright agreement is required upon acceptance.
Preparation of Electronic Manuscripts & Submission
· Manuscripts should be double-spaced, 12-point Times New Roman, with line numbers and page numbers.
· Original editable source files (not PDFs) are required.
· Submission is conducted entirely online via the journal submission system (URL to be determined).
· All correspondence is handled by email.
Submission Requirements
a. Cover Letter
A cover letter must accompany each submission, indicating the corresponding author's contact details and affiliations for all authors. Suggest the names and contact details of three potential reviewers (at least two international reviewers for contributors from China). The editors are not obliged to use these suggestions.
b. Research Highlights
3–5 bullet points summarizing the core contributions (≤ 85 characters each).
c. Manuscript Components (Research Articles)
Required sections:
· Title
· Running Title
· Author Names and Affiliations
· Highlights
· Abstract
· Keywords
· Graphical Abstract
· Main Text (Introduction, Methods, Results, Discussion, Conclusions)
· Acknowledgements
· References
· Figure Captions
· Tables
d. Review Articles
Should be logically structured with comprehensive references. Pre-submission consultation is encouraged.
Manuscript Components: Detailed Specifications
a. Title
Clear, descriptive, ≤ 20 words. Avoid abbreviations.
b. Running Title
Shortened title, ≤ 80 characters.
c. Authors and Affiliations
Provide full names, institutional addresses, and clearly indicate the corresponding author.
d. Highlights
3–5 concise bullet points emphasizing novelty and performance relevance.
e. Graphical Abstract
· Size: ≥ 6 cm × 11 cm, 300 dpi
· Format: TIFF, EPS, PDF, or MS Office
· Clear visual logic, minimal text
f. Abstract
150–250 words summarizing objectives, methods, key results, and conclusions. Avoid citations.
g. Keywords
Up to 6 keywords.
h. Text Structure
· Introduction: Background and objectives
· Methods: Reproducible technical detail
· Results: Clear and focused findings
· Discussion: Interpretation and broader implications
· Conclusions: Key takeaways without citations
i. Tables
· Three-line format
· Numbered with Roman numerals
· Each on a separate page
j. Figures
· Numbered consecutively
· High resolution, submitted as separate files
· Maps must comply with national publication regulations
k. Equations
Clearly typed and numbered. Use “Eq.” or “Eqs.” Consider a Nomenclature section if needed.
l. Supplementary Materials
Allowed when essential; subject to peer review.
Acknowledgements
Declare conflicts of interest and confirm compliance with all relevant ethical guidelines and institutional approvals.
Citations and References
· In-text citations: [1], [2,3], [5–7]
· References listed in citation order
· Journal names spelled out in full and italicized
· Volume numbers in bold
Example (Journal):
Smith J, Doe A. Digital twin-driven optimization in ultra-precision machining. Engineering·High-Performance Manufacturing, 2025, 1(1): 1–15.
Proofreading and Production
Accepted manuscripts will undergo professional production.
Proofs must be returned within 48 hours. Only minor typographical corrections are permitted at this stage.