Deposition of Phosphate Nanoparticles onto Textile Fabrics via Sol-gel Method and Their Kinetics Desorption Studies

Abstract

In this paper, phosphate nanoparticles were coated on cotton(CO) and polyester(PES) textile surfaces by sol-gel method using tetraethylorthosilicate(TEOS) and chloropropyltriethoxysilane(CPTS) as silica precursors. The deposited nanoparticles were observed with scanning electronic microscopy energy-dispersive X-ray spectroscopy (SEM-EDX). The release kinetics of phosphorus(P) from these textiles into the aqueous medium(Aq), acid(Ac), and basic(Ba) artificial sweats were then studied. The released amount of phosphorus was evaluated by the inductively coupled plasma(ICP) according to ISO NF EN 16711-2 procedure. The results revealed that the release of P into the aqueous medium is lower than in the artificial sweat. The kinetics data[the phosphorus desorption amount(mg/g) as a function of time] were modeled according to five models: the first order, the second order, the third order, simple Elovich and parabolic diffusion. The suitable model was chosen based on the coefficient of determination(R ²) and the calculation of the sum of the absolute errors(EABS), which describes the error between the theoretical and experimental values. SEM observations were also carried out on the fabrics after desorption in order to show the impact of desorption on their morphology. Furthermore, the impact of P release on the tensile strength of CO and PES fabrics was investigated using a uniaxial tensile test. The thermal stability of all samples before and after desorption was assessed by thermogravimetric analysis(ATG).

Keywords

Sol-gel / Coating / Kinetic / Desorption / Phosphate nanoparticle

References

[1] Jiang C, Liu W, Yang M, He S, Xie Y, Wang Z. J. Sol-Gel Sci. Technol., 2018, 87(2): 455.

[2] Luo X, Weng Y, Wang S, Du J, Wang H, Xu C. J. Sol-Gel Sci. Technol., 2019, 89(3): 820.

[3] Mao N., Du M.; Eds. Williams J., Waterproof and Water Repellent Textiles and Clothing, Woodhead Publishing, Cambridge, 2018, 233

[4] Sathishkumar M, Saroja M, Venkatachalam M. Optik, 2019, 182: 774.

[5] Mahltig B., Grethe T., Haase H., Handbook of Sol-Gel Science and Technology, 2018, 3461

[6] Arreche R, Hernández F, Blanco M, Vázquez P. Procedía Materials Science, 2015, 8: 397.

[7] Rivero P. J., Goicoechea J.; Eds., Sun G. Antimicrobial Textiles, Woodhead Publishing, Cambridge, 2016, 47

[8] Bentis A., Boukhriss A., Grancaric A. M., El Bouchti M., El Achaby M., Gmouh S., Cellulose, 2019, doi: https://doi.org/10.1007/s10570-018-2206-4

[9] Bentis A, Boukhriss A, Boyer D, Gmouh S. IOP Conf. Ser.: Mater. Sci. Eng., 2017, 254(12): 122001.

[10] Alongi J, Ciobanu M, Malucelli G. Carbohydrate Polymers, 2012, 87(1): 627.

[11] Nguyen T M D, Chang S, Condon B, Uchimiya M, Fortier C. Polymers for Advanced Technologies, 2012, 23(12): 1555.

[12] Luo J, Wang L, Huang X, Li B, Guo Z, Song X, Lin L, Tang LC, Xue H, Gao J. ACS Appl. Mater. Interfaces, 2019, 11(11): 10883.

[13] Le Ouay B, Stellacci F. Nano Today, 2015, 10(3): 339.

[14] El-Rafie MH, Mohamed A A, Shaheen TI, Hebeish A. Carbohydrate Polymers, 2010, 80(3): 779.

[15] Kim TS, Cha JR, Gong MS. Textile Research Journal, 2018, 88(7): 766.

[16] Zhao Y, Dang W, Lu Z, Deng J, Hao Y, Su Z, Zhang M. Cellulose, 2018, 25(7): 3913.

[17] von Goetz N, Lorenz C, Windler L, Nowack B, Heuberger M, Hungerbühler K. Environmental Science & Technology, 2013, 47(17): 9979.

[18] Yu J, Pang Z, Zheng C, Zhou T, Zhang J, Zhou H, Wei Q. Applied Surface Science, 2019, 470: 84.

[19] Becheri A, Dürr M, Lo Nostro P, Baglioni P. J. Nanopart. Res., 2008, 10(4): 679.

[20] Riaz S., Ashraf M., Hussain T., Hussain M. T., Cellulose, 2019, doi: https://doi.org/10.1007/s10570-019-02440-x

[21] Dolez P.I., Benaddi H.; Eds. Dolez P., Vermeersch O., Izquierdo V., Advanced Characterization and Testing of Textiles, The Textile Institute Book Series, Woodhead Publishing, Cambridge, 2018, 151, https://doi.org/10.1016/B978-0-08-100453-1.00008-8

[22] Wagener S, Dommershausen N, Jungnickel H, Laux P, Mitrano D, Nowack B, Schneider G, Luch A. Environmental Science & Technology, 201, 50(11): 5927.

[23] Kumta PN, Sfeir C, Lee D H, Olton D, Choi D. Acta Biomaterialia, 2015, 1(1): 65.

[24] Kalita S J, Bhardwaj A, Bhatt H A. Materials Science and Engineering: C, 2007, 27(3): 441.

[25] Giger E V, Puigmartí-Luis J, Schlatter R, Castagner B, Dittrich PS, Leroux J C. Journal of Controlled Release, 2011, 150(1): 87.

[26] Tabaković A, Kester M, Adair JH. WIREs Nanomedicine and Nanobiotechnology, 2012, 4(1): 96.

[27] Sadallah L, Boukhriss A, Hannache H, Gmouh S. Turkish Journal of Chemistry, 2020, 44(1): 142.

[28] Fekri M, Gorgin N, Sadegh L. Environ. Earth Sci., 2011, 64(3): 721.

[29] Taylor RW, Hassan K, Mehadi A A, Shuford JW. Communications in Soil Science and Plant Analysis, 1995, 26(11/12): 1761.

[30] Rengaraj S, Yeon JW, Kim Y, Jung Y, Ha Y K, Kim W H. Journal of Hazardous Materials, 200, 143(1/2): 469.

[31] Gorgannejad S, Reisi Gahrooei M, Paynabar K, Neu RW. Acta Materialia, 2019, 165: 259.

[32] Yu Y, Yi Z, Liang Y Z. Bioorganic & Medicinal Chemistry Letters, 2007, 17(7): 1855.

[33] El messoudi M., Boukhriss A., Cherkaoui O., El Kouali M., Gmouh S., J. Coat. Technol. Res., 2019, 1

[34] Tarimala S, Kothari N, Abidi N, Hequet E, Fralick J, Dai LL. Journal of Applied Polymer Science, 200, 101(5): 2938.

[35] Luo X, Weng Y, Wang S, Du J, Wang H, Xu C. J. Sol-Gel Sci. Technol., 2019, 89(3): 820.

[36] Guido E. Polymer Degradation and Stability, 2013, 98(9): 1609.