Quantitative analysis of Fe content in iron ore via external calibration in conjunction with internal standardization method coupled with LIBS

Liwen Sheng , Tianlong Zhang , Kang Wang , Hongsheng Tang , Hua Li

Chemical Research in Chinese Universities ›› 2015, Vol. 31 ›› Issue (1) : 107 -111.

PDF
Chemical Research in Chinese Universities ›› 2015, Vol. 31 ›› Issue (1) : 107 -111. DOI: 10.1007/s40242-014-4318-1
Article

Quantitative analysis of Fe content in iron ore via external calibration in conjunction with internal standardization method coupled with LIBS

Author information +
History +
PDF

Abstract

The external calibration in conjunction with internal standardization(ECIS) coupled with laser-induced breakdown spectroscopic(LIBS) technique was proposed to perform the quantitative analysis of Fe content in iron ore. The plasma temperature and the electron number density were calculated to prove that the plasma was under local thermodynamic equilibrium(LTE) conditions and to ensure that the integral intensities of Fe I lines were reasonable. In addition, the result of the quantitative analysis shows a content of (20.26±0.59)% by mass of Fe in the iron ore. It was determined by four calibration curves, drawn for four emission lines of Fe I(373.48, 373.71, 404.58 and 438.35 nm) normalized by Mn I line, base on the ECIS method which can eliminate the influence of matrix effect and improve the accuracy of quantitative analysis, compared with the standard addition method. Both the results of these two analytical methods were compared with that listed in the Standard Substance Certificate. The percentage content of Fe in the same sample of iron ore by the ECIS method was (20.17±0.08)% by mass, which shows a good performance to analyze the Fe content of iron ore in combination with LIBS.

Keywords

Laser-induced breakdown spectroscopy(LIBS) / External calibration in conjunction with internal standardization(ECIS) method / Chemical analysis / Iron ore

Cite this article

Download citation ▾
Liwen Sheng, Tianlong Zhang, Kang Wang, Hongsheng Tang, Hua Li. Quantitative analysis of Fe content in iron ore via external calibration in conjunction with internal standardization method coupled with LIBS. Chemical Research in Chinese Universities, 2015, 31(1): 107-111 DOI:10.1007/s40242-014-4318-1

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Iron Ores—Determination of Calcium, Silicon, Manganese, Titanium, Phosphorus, Magnesium, Aluminium and Barium Content-Wavelength Dispersive X-ray Fluorescence Spectrometric Method, GB/T 6730.62-2005.

[2]

Death D L, Cunningham A P, Pollard L J. Spectrochim. Acta Part B, 2008, 63: 763.

[3]

Liu J Y, Li Z L, Vogel W, Yang H. Chem. Res. Chinese Universities, 2012, 28(3): 511.

[4]

Brai M, Gennaro G, Schillaci T, Tranchina L. Spectrochim. Acta Part B, 2009, 64: 111.

[5]

Gurell J, Bengtson A, Falkenstrom M, Hansson B A M. Spectrochim. Acta Part B, 2012, 67: 446.

[6]

Cabalin L M, Gonzalez A, Ruiz J, Laserna J J. Spectrochim. Acta Part B, 2010, 65: 680.

[7]

Nunes L C, Silva G A, Trevizan L C, Santos Júnior D, Poppi R J, Krug F J. Spectrochim. Acta Part B, 2009, 64: 565.

[8]

Lin Q, Wei Z, Xu M, Wang S, Niu G, Liu K, Duan Y, Yang J. RSC Adv., 2014, 4: 14392.

[9]

Gottfried J L. Analytical and Bioanalytical Chemistry, 2011, 400: 3289.

[10]

Singh J P, Thakur S N. Laser-induced Breakdown Spectroscopy, 2007, Amsterdam: Elsevier.

[11]

Hahn D W, Omenetto N. Appl. Spectrosc., 2010, 64: 335.

[12]

Hahn D W, Omenetto N. Appl. Spectrosc., 2012, 66: 347.

[13]

Aragon C, Aguilera J A. Spectrochim. Acta Part B, 2008, 63: 893.

[14]

Gornushkin I, Panne U. Spectrochim. Acta Part B, 2010, 65: 345.

[15]

Konjević N, Ivković M, Jovićević S. Spectrochim. Acta Part B, 2010, 65: 593.

[16]

Tognoni E, Cristoforetti G, Legnaioli S, Palleschi V. Spectrochim. Acta Part B, 2010, 65: 1.

[17]

Grant K J, Paul G L, O’Neill J A. Appl. Spectrosc., 1991, 45: 701.

[18]

Cremers D A, Radziemski L J. Handbook of Laser-induced Breakdown Spectroscopy, 2006, Chichester: John Wiley and Sons.

[19]

Haider A, Wahadoszamen M, Sadat M, Abedin K, Talukder A. Optics & Laser Technology, 2010, 42: 969.

[20]

Sylvester P. Laser-Ablation-ICP-MS in the Earth Sciences: Current Practices and Outstanding Issues, 2008, Vancouver: Mineralogical Association of Canada 67.

[21]

Luo W, Zhao W, Duan Y, Wang H. Chinese Optics Letters, 2011, 1.

[22]

Saxberg B E H, Kowalskim B R. Analytical Chemistry, 1979, 51: 1031.

[23]

Ciucci A, Corsi M, Palleschi V, Rastelli S, Salvetti A, Tognoni E. Appl. Spectrosc., 1999, 53: 960.

[24]

Abdellatif G, Imam H. Spectrochim. Acta part B, 2002, 57: 1155.

[25]

http://physics.nist.gov/PhysRefData/ASD/index.html

[26]

Gupta G P, Suri B M, Verma A, Sundararaman M, Unnikrishnan V K, Alti K, Kartha V B, Santhosh C. J. Alloy Compd., 2011, 509: 3740.

[27]

Honorato F A, Honorato R S, Pimentel M F, Araujo M C U. Analyst, 2002, 127: 1520.

[28]

Long G L, Winefordner J D. Analytical Chemistry, 1983, 55: 7.

AI Summary AI Mindmap
PDF

112

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/