Synthesis and retanning performance of hollow polymer microspheres for lightweight leather processing

Abstract

Hollow polymer microspheres (HPMs) were synthesized through emulsion polymerization for application in leather retanning, offering a novel approach to lightweight leather processing. Seed emulsion polymerization enabled the controlled synthesis of four distinct HPM sizes ranging from 300 to 650 nm. Comprehensive characterization revealed that HPMs exhibited distinct hollow structures, narrow particle size distributions, and excellent storage stabilities in emulsion form. The retanning performance of HPMs was evaluated in wet-blue. The HPMs demonstrated excellent permeation during the retanning process, selectively filling the gaps among the fibers, particularly larger spaces. The maximum thickening rate of HPM emulsion (solid content of 10%) retanned leathers reached 18.01%, surpassing the 11.32% achieved with the commercial acrylic resin retanning agent (AR, solid content of 30%) at the same dosage. The maximum absorption of HPM (88.31%) closely approached that of AR (90.23%). Furthermore, HPM retanned leathers showed satisfying performances in physical and mechanical properties. These findings demonstrate the potential of HPMs as lightweight and highly selective filling retanning agents with excellent thickening and absorption properties, offering an attractive alternative to traditional retanning agents.

Keywords

Hollow polymer microsphere / Emulsion polymerization / Lightweight / Leather / Retanning

References

[1] ZhangC, ZhouJB, SunN, LiaoXP, ShiB. A novel approach for preparing aldehyde-free melamine resin and investigation of its retanning performance. Collagen Leather, 2024, 6(1): 10

[2] ZhuZY, ZhangCX, PengBY, ZhangX. Impact of acrylic polymer molecular weight and groups on physicochemical properties and re-tanning effectiveness in leather manufacturing. J Am Leather Chem Assoc., 2024, 119(9): 405-14

[3] ZhangJX, ChenWL, ZhaiR, ChenH, ShanZH. Application of noise reduction and heat insulation based on controlled-size polystyrene hollow microspheres. J Ind Eng Chem., 2022, 115: 476-90

[4] ZhouJB, LiH, WenC, WangYP, LiaoXP, ShiB. Ferroconcrete-inspired construction of wearable composites with a natural leather matrix for excellent neutron-shielding performance. Compos B, 2023, 266: 111043

[5] YiYD, LiQJ, SunQY, WangYN, ShiB. Aggregation behavior of cationic amphiphilic polymers and their application in metal-free leather retanning. Polymer, 2024, 295: 126738

[6] SongY, ZengYH, XiaoKL, WuHP, ShiB. Effect of molecular weight of acrylic resin retanning agent on properties of leather. J Am Leather Chem Assoc., 2017, 112(04): 128-34

[7] NashyEHA, EssaMM, HussainAI. Synthesis and application of methyl methacrylate/butyl acrylate copolymer nanoemulsions as efficient retanning and lubricating agents for chrome-tanned leather. J Appl Polym Sci., 2012, 124(4): 3293-301

[8] PanF, XiaoYH, ZhangL, ZhouJJ, WangCH. Leather wastes into high-value chemicals: Keratin-based retanning agents via UV-initiated polymerization. J Cleaner Prod., 2023, 383: 135492

[9] SergeEJ, AllaJP, BelibiPDB, MbadcamKJ, FathimaNN. Clay/polymer nanocomposites as filler materials for leather. J Cleaner Prod, 2019, 237: 117837

[10] SunGQ, GuanZP, ShenZK, LiuR. Enhancing formation and retention of hollow structural integrity through intermediate and outermost layer design in seeded emulsion polymerization of hollow latex particles. J Appl Polym Sci., 2024, 141(15): e55215

[11] AfolabiOA, KannyK, MohanTP. Processing of hollow glass microspheres (HGM) filled epoxy syntactic foam composites with improved structural characteristics. Sci Eng Compos Mater., 2021, 28(1): 116-27

[12] WangYR, ChengM, YanXR, ZhaoPX, WangKY, WangYF, WangXY, WangJ. Preparation and characterization of an active packaging film loaded with tea tree oil-hydroxyapatite porous microspheres. Ind Crops Prod., 2023, 199: 116783

[13] BaoY, ChangJX, ZhangYX, ChenL. Robust superhydrophobic coating with hollow SiO₂/PAA-b-PS Janus microspheres for self-cleaning and oil–water separation. Chem Eng J., 2022, 446: 136959

[14] LiuYP, LiL, LiuHC, ZhangMJ, LiuAJ, LiuL, TangL, WangGL, ZhouSS. Hollow polymeric microsphere-filled silicone-modified epoxy as an internally insulated material for composite cross-arm applications. Compos Sci Technol, 2020, 200: 108418

[15] ZhouJB, SunN, LiaoXP, ShiB. Investigation of high penetration and dispersion of functional nanoparticles in leather. J Am Leather Chem Assoc., 2023, 118(9): 386-95

[16] ZhangJX, ChenJ, LongZZ, ChenH, ShanZH. The functionalization of film materials for grafting WPU with polystyrene hollow microspheres. Prog Org Coat., 2023, 182: 107685

[17] JiangWX, ZhangXH, ChenD, MaYH, YangWT. High performance low-k and wave-transparent cyanate ester resins modified with a novel bismaleimide hollow polymer microsphere. Compo Part B Eng., 2021, 222: 109041

[18] RamliRA. Hollow polymer particles: a review. RSC Adv, 2017, 7(83): 52632-50

[19] WeiB, WangSJ, SongHG, LiuHY, LiJ, LiuN. A review of recent progress in preparation of hollow polymer microspheres. Pet Sci, 2009, 6: 306-12

[20] ZhuMY, ChengYK, LuoQ, El-khateebM, ZhangQ. A review of synthetic approaches to hollow nanostructures. Mater Chem Front., 2021, 5(6): 2552-87

[21] HongYH, ZhongW, ZhangMM, ZhaoHY. Polymerization-induced interfacial self-assembly: a powerful tool for the synthesis of micro-sized hollow capsules. Macromolecules, 2021, 54(24): 11238-47

[22] YuanCD, MiaoAH, CaoJW, XuYS, CaoTY. Preparation of monodispersed hollow polymer particles by seeded emulsion polymerization under low emulsifier conditions. J Appl Polym Sci., 2005, 98(4): 1505-10

[23] XieXM, YanJF, WuQ, WangTY, FmChu, YangS. Rapid and efficient oil removal from O/W emulsions by hydrophobic porous polystyrene microspheres embedded with hydrophilic surface micro-regions. J Hazard Mater., 2022, 434: 128898

[24] GurungS, GucciF, CairnsG, ChianellaL, LeightonGLT. Hollow silica nano and micro spheres with polystyrene templating: a mini-review. Materials, 2022, 15(23): 8578

[25] LeeN, PaeJ, KangSH, KimHK, MoonJY. Development of high strength & lightweight cementitious composites using hollow glass microsphere in a low water-to-cement matrix. Cem Concr Compos., 2022, 130: 104541

[26] KawaguchiS, YektaA, WinnikMA. Surface characterization and dissociation properties of carboxylic acid core-shell latex particle by potentiometric and conductometric titration. J Colloid Interface Sci., 1995, 176(2): 362-369

[27] PengWL, ZhangXL, ChenXR. The principle and method of testing leather fullness and softness. J Soc Leather Technol Chem., 2006, 90(3): 117-122

[28] IUP Group. Measurement of tensile strength and percentage elongation. J Soc Leather Technol Chem., 2000, 84(7): 317-321

[29] IUP 8. Measurement of tear load-double edge tear. J Soc Leather Technol Chem., 2000, 84(7): 327-329

[30] MusaAE, et al.. Measurement of leather softness. J Soc Leather Technol Chem., 2000, 84(7): 377-9

[31] ZhangYY, YuanKZ, MagagninL, WuXS, JiangZY, WangW. Selective adsorption of Pb (II) and Cu (II) on mercapto-functionalized aerogels: experiments, DFT studies and LCA analysis. J Cleaner Prod., 2023, 393: 136126

[32] ReneR, FerasO, YohannC, MazenM, BrunoS, KarineA, NathalieM, KhairA. Microfluidic manufacturing of liposomes: development and optimization by design of experiment and machine learning. ACS Appl Mater Interfaces, 2022, 14(35): 39736-39745

[33] WuKJ, TseECM, ShangCX, GuoZX. Nucleation and growth in solution synthesis of nanostructures–from fundamentals to advanced applications. Prog Mater Sci., 2022, 123: 100821

[34] HeX, WangYN, ZhouJF, WangHB, DingW, ShiB. Suitability of pore measurement methods for characterizing the hierarchical pore structure of leather. J Am Leather Chem Assoc., 2019, 114(2): 41-7

[35] SunN, ZhouJB, LiaoXP, ShiB. Synthesis and retanning performance of a novel melamine resin with ultralow formaldehyde content. J Am Leather Chem Assoc., 2023, 118(1): 23-35

[36] ChenH, LiY, DaiHZ, ChenL, DingXL, HuZJ. Collagen hydrolyzed extract derived from leather waste as a multifunctional additive for the preparation of granular fertilizer. Sustainable Chem Pharm., 2023, 36: 101327

[37] DingXL, LiY, ChenJ, HuangXY, ChenL, HuZJ. Sustainable utilization of finished leather wastes: A novel collagen hydrolysate-based gypsum additive with high-retarding performance. Process Saf Environ Prot., 2023, 172: 451-61

[38] ZhouR, JinY, LaiSQ, ShiLJ, BaiL, PengZY. A novel composite retanning system based on pH-responsive hydrogen bonding and hydrophobic interaction for cleaner leather processing. J Cleaner Prod., 2022, 339: 130666

[39] DengW, GuoHC, YuWL, KanCY. Effects of shell composition, dosage, and alkali type on the morphology of polymer hollow microspheres. Chin J Polym Sci., 2018, 36: 43-8

[40] DianaM, AlineP, LudovicBG, PhilippeC. On-site contactless surface analysis of modern paintings from Galleria Nazionale (Rome) by reflectance FTIR and Raman spectroscopies. Talanta, 2021, 227: 122159

[41] JiangJY, YangWH, ChengYP, LiuZD, ZhangQ, ZhaoK. Molecular structure characterization of middle-high rank coal via XRD, Raman and FTIR spectroscopy: Implications for coalification. Fuel, 2019, 239: 559-72

[42] TamaraK, OlegO, IrinaG, MikhailS, OksanaE, VladimirK, BorisD, ElenaT. Thioglycolic acid FTIR spectra on Ag₂S quantum dots interfaces. Materials, 2020, 13(4): 909

[43] LiuJC, FanX, AstrucD, GuHB. Robust conductive skin hydrogel e-skin constructed by top–down strategy for motion-monitoring. Collagen Leather, 2023, 5(1): 17

[44] Franco-CañellasA, DuhmS, GerlachA, SchreiberF. Binding and electronic level alignment of π-conjugated systems on metals. Rep Prog Phys., 2020, 83(6): 066501

[45] XuSF, XiaoHZ, ShiB. The improvement of dispersity, thermal stability and mechanical properties of collagen fibers by silane modification: an exploration for developing new leather making technology. J Leather Sci Eng., 2022, 4(1): 26

[46] ChiuTH, WuSY, YangYC, YanCJ, YehYC. Fabrication of luminescent triple-cross-linked gelatin/alginate hydrogels through freezing-drying-swelling and freezing-thawing processes. Biomacromol., 2024, 25(9): 5758-70

[47] YangBB, XuL, LiuY, LiuBJ, ZhangMY. Preparation of monodisperse polystyrene microspheres with different functional groups using soap-free emulsion polymerization. Colloid Polym Sci., 2021, 299: 1095-102

[48] LinYY, ChenWH, LiuHC. Aging and emulsification analyses of hydrothermal liquefaction bio-oil derived from sewage sludge and swine leather residue. J Cleaner Prod., 2020, 266: 122050

[49] WangXC, SunSW, ZhuX, GuoPY, LiuXH, LiuCL, LiM. Application of amphoteric polymers in the process of leather post-tanning. J Leather Sci Eng., 2021, 3: 1-9

[50] LiuXH, YueOY, WangXC, HouMD, ZhengMH, JiangHE. Preparation and application of a novel biomass-based amphoteric retanning agent with the function of reducing free formaldehyde in leather. J Cleaner Prod., 2020, 265: 121796

[51] SongJL, HuDW, LuoSM, LiuWS, WangDF, SunQS, ZhangGP. Energy-absorption behavior of metallic hollow sphere structures under impact loading. Eng Struct., 2021, 226: 111350

[52] YuY, LinYR, ZengYH, WangYN, ZhangWH, ZhouJF, ShiB. Life cycle assessment for chrome tanning, chrome-free metal tanning, and metal-free tanning systems. ACS Sustainable Chem Eng., 2021, 9(19): 6720-31

Funding

National Natural Science Foundation of China(22278279)

RIGHTS & PERMISSIONS

The Author(s)