To BIM or not to BIM? Lessons learned from a Greek vernacular museum building
Christina Priavolou
AIMS Environmental Science ›› 2020, Vol. 7 ›› Issue (2) : 192 -207.
The environmental impact of buildings has stimulated efforts to promote sustainable development in the construction sector. Technological development aims to provide an effective framework for the design, construction, and management of buildings through the use of tools such as Building Information Modeling (BIM). This paper critically assesses the use of BIM technology in vernacular design and analysis through the case study of a Greek vernacular museum building. Based on software application as well as in-situ observation and interviews, accurate energy analysis and safety were proved to be important advantages achieved through BIM technology. On the contrary, the inability to capture tacit knowledge and the lack of adaptability to local specificities appear to be the main weaknesses of BIM technology. Certain measures to enhance the use of BIM technology for the design and analysis of vernacular buildings are proposed.
Building Information Modeling (BIM) / standardization / sustainability / design / construction / energy analysis / vernacular architecture
| [1] |
Wong JKW, Kuan KL (2014) Implementing “BEAM Plus” for BIM-based sustainability analysis. Automat Constr 44: 163-175. |
| [2] |
|
| [3] |
|
| [4] |
Rode P, Burdett R, |
| [5] |
|
| [6] |
|
| [7] |
Wetter Μ (2011) A view on future building system modeling and simulation, In Hensen J. and R. Lamberts (eds), Building performance simulation for design and operation, Routledge, London. |
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
Bernstein P, Pittman J (2004) Barriers to the adoption of Building Information Modeling in the building industry, Autodesk Buildings Solutions, San Rafael, California. |
| [13] |
|
| [14] |
|
| [15] |
Salman M (2018) Sustainability and vernacular architecture: Rethinking what identity is, Urban and architectural heritage conservation within sustainability, Kabila Hmood, IntechOpen. |
| [16] |
|
| [17] |
|
| [18] |
McLennan JF (2006) The philosophy of sustainable design, Kansas City, MO: EcoTone. |
| [19] |
|
| [20] |
|
| [21] |
Kamarudin Z (2015) Long-roofed houses of northeastern peninsular Malaysia: sustainability of its identity in the built environment. Proc Environ Sci 28: 698-707. |
| [22] |
|
| [23] |
|
| [24] |
|
| [25] |
National Institute of building sciences, About the national BIM standard-United States, 2019. Available from https://www.nationalbimstandard.org/about. |
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
| [30] |
|
| [31] |
|
| [32] |
|
| [33] |
|
| [34] |
|
| [35] |
|
| [36] |
|
| [37] |
|
| [38] |
|
| [39] |
|
| [40] |
Wong JKW, |
| [41] |
|
| [42] |
|
| [43] |
|
| [44] |
Garmulewicz A (2015) 3D printing in the commons: knowledge and the nature of digital and physical resources. Doctoral thesis. University of Oxford. |
| [45] |
|
| [46] |
|
| [47] |
|
| [48] |
|
| [49] |
Flyvbjerg B (2006) Five misunderstandings about case-study research. Qual Inq 12: 219-245. |
| [50] |
Pavlos Vrellis Museum of Greek history of wax effigies, Prologue-Introduction, 2019. Available from https://www.vrellis.gr/ep/. |
/
| 〈 |
|
〉 |