Hydrogel Microfibers-Mediated Engineering Vascularized High-Cell-Density Tissues with Structural Developmental Reinforcement

Abstract

Engineering vascularized high-cell-density (HCD) tissues is pivotal for recapitulating the physiological functions of biomimetic constructs in vitro. However, traditional strategy that directly mix high-density cells with polymeric hydrogels remain challenging. To address these bottlenecks, might we move beyond the traditional strategy of mixing high-density cells with dense polymer hydrogels? Instead, could the self-sustained proliferation of basic cells together with endothelial vascularization be harnessed to construct vascularized HCD tissues exhibiting structural developmental reinforcement? Here, by integrating fiber-inducing factors from natural cell-extracellular matrix (ECM) structures with porous matrices, we propose a model where biomimetic structural units are directly mixed with a specific quantity of basic cells to construct a porous structural carrier that confines cells to two-dimensional constraints within microfibers. The two-dimensional constraint method using microfiber units eliminates the confining constraints of traditional hydrogel networks on cells, providing ample physiological space for rapid extension, migration, and proliferation. Meanwhile, the strategy of combining microfiber units with porous hydrogels significantly enhances structural porosity while ensuring structural integrity and strength, preventing collapse. Within this porous biomimetic microfiber system, basic cells proliferate continuously, strengthening intercellular interactions and reinforcing the structure’s overall mechanical properties and stability. Furthermore, the microfibrillar framework provides ECM-like cues that promote ordered expansion and spontaneous vascular formation. Introducing human bone marrow-derived mesenchymal stem cells (BMSCs) enables paracrine pro-angiogenic signaling to stimulate endothelial proliferation and migration. The synergistic effect of spatial structural induction and biological signaling stimulation significantly promotes the generation and maturation of vascular-like structures within the system. The tissue engineering strategy of mixing biomimetic microfiber units with a specific quantity of basic cells overcomes the limitations of traditional methods involving direct mixing of dense polymer hydrogels with large numbers of cells. This approach offers a novel solution for constructing vascularized, HCD tissues with physiological strength.

Graphical Abstract

Keywords

Hydrogel microfibers / Basic cells / Proliferation / Vascularized high-cell-density tissue

References

[1] Mao M, Han K, Gao J, Ren Z, Zhang Y, He J, Li D. Engineering highly aligned and densely populated cardiac muscle bundles via fibrin remodeling in 3D‐printed anisotropic microfibrous lattices. Adv Mater, 2025, 37 2419380

[2] Cidonio G, Glinka M, Dawson JI, Oreffo ROC. The cell in the ink: improving biofabrication by printing stem cells for skeletal regenerative medicine. Biomaterials, 2019, 209 10

[3] Jiang J, Yuan C, Zhang X, Gu L, Yao Y, Wang X, He Y, Shao L. 3D bioprinting of liquid high-cell-proportion bioinks in liquid granular bath. Adv Mater, 2024, 36 2412127

[4] Lu T-Y, Ji Y, Lyu C, Shen EN, Sun Y, Xiang Y, Meng-Saccoccio T, Feng G-S, Chen S. Bioprinted high cell density liver model with improved hepatic metabolic functions. Biomaterials, 2025, 320: 123256

[5] Zhu W, Qu X, Zhu J, Ma X, Patel S, Liu J, Wang P, Lai CSE, Gou M, Xu Y, Zhang K, Chen S. Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture. Biomaterials, 2017, 124 106

[6] You S, Xiang Y, Hwang HH, Berry DB, Kiratitanaporn W, Guan J, Yao E, Tang M, Zhong Z, Ma X, Wangpraseurt D, Sun Y, Lu T, Chen S. High cell density and high-resolution 3D bioprinting for fabricating vascularized tissues. Sci Adv, 2023, 9: eade7923

[7] Madden LR, Mortisen DJ, Sussman EM, Dupras SK, Fugate JA, Cuy JL, Hauch KD, Laflamme MA, Murry CE, Ratner BD. Proangiogenic scaffolds as functional templates for cardiac tissue engineering. Proc Natl Acad Sci, 2010, 107 15211

[8] Ying G, Jiang N, Yu C, Zhang YS. Three-dimensional bioprinting of gelatin methacryloyl (GelMA). Bio-Des Manuf, 2018, 1 215

[9] Causa F, Netti PA, Ambrosio L, Ciapetti G, Baldini N, Pagani S, Martini D, Giunti A. Poly-ϵ-caprolactone/hydroxyapatite composites for bone regeneration: in vitro characterization and human osteoblast response. J Biomed Mater Res, 2006, 76A: 151

[10] Wang P, Sun Y, Shi X, Shen H, Ning H, Liu H. 3D printing of tissue engineering scaffolds: a focus on vascular regeneration. Bio-Des Manuf, 2021, 4 344

[11] Pampaloni F, Reynaud EG, Stelzer EHK. The third dimension bridges the gap between cell culture and live tissue. Nat Rev Mol Cell Bio, 2007, 8 839

[12] Chun T-H, Hotary KB, Sabeh F, Saltiel AR, Allen ED, Weiss SJ. A pericellular collagenase directs the 3-dimensional development of white adipose tissue. Cell, 2006, 125 577

[13] Miller KL, Xiang Y, Yu C, Pustelnik J, Wu J, Ma X, Matsui T, Imahashi K, Chen S. Rapid 3D bioprinting of a human iPSC-derived cardiac micro-tissue for high-throughput drug testing. Organs-on-a-Chip, 2021, 3 100007

[14] Mathur A, Ma Z, Loskill P, Jeeawoody S, Healy KE. In vitro cardiac tissue models: current status and future prospects. Adv Drug Deliv Rev, 2016, 96: 203

[15] Narbay E, Caine A, Pandit S, Montgomery G, Harper M, Cárdenas-Vásquez ED, Hamilton H, Hicks M, Mattar D, Choy K, Bisoffi M, Lyon LA. Dynamic, reconfigurable, and hierarchical biosynthetic composites via collagen self-assembly within highly crowded microgel pastes. Adv Mater, 2025, 38 e15114

[16] Edmondson R, Broglie JJ, Adcock AF, Yang L. Three-dimensional cell culture systems and their applications in drug discovery and cell-based biosensors. Assay Drug Dev Techn, 2014, 12: 207

[17] Anthon SG, Valente KP. Vascularization strategies in 3D cell culture models: from scaffold-free models to 3D bioprinting. Int J Mol Sci, 2022, 23: 14582

[18] Yamada KM, Cukierman E. Modeling tissue morphogenesis and cancer in 3D. Cell, 2007, 130: 601

[19] Qazi TH, Wu J, Muir VG, Weintraub S, Gullbrand SE, Lee D, Issadore D, Burdick JA. Anisotropic rod-shaped particles influence injectable granular hydrogel properties and cell invasion. Adv Mater, 2022, 34: 2109194

[20] Ben Messaoud G, Aveic S, Wachendoerfer M, Fischer H, Richtering W. 3D printable gelatin methacryloyl (GelMA)-dextran aqueous two-phase system with tunable pores structure and size enables physiological behavior of embedded cells in vitro. Small, 2023, 19: 2208089

[21] Spicer D, Hydrogel C. Scaffolds for tissue engineering: the importance of polymer choice. Polym Chem, 2020, 11: 184

[22] Fang Y, Guo Y, Ji M, Li B, Guo Y, Zhu J, Zhang T, Xiong Z. 3D printing of cell-laden microgel-based biphasic bioink with heterogeneous microenvironment for biomedical applications. Adv Funct Mater, 2022, 32: 2109810

[23] Müller MZ, Bernero M, Xie C, Qiu W, Oggianu E, Rabut L, Michaels TCT, Style RW, Müller R, Qin X-H. Cell-guiding microporous hydrogels by photopolymerization-induced phase separation. Nat Commun, 2025, 16: 4923

[24] Fang Y, Ji M, Yang Y, Guo Y, Sun R, Zhang T, Sun W, Xiong Z. 3D printing of vascularized hepatic tissues with a high cell density and heterogeneous microenvironment. Biofabrication, 2023, 15 045004

[25] Skylar-Scott MA, Uzel SGM, Nam LL, Ahrens JH, Truby RL, Damaraju S, Lewis JA. Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels. Sci Adv, 2019, 5: eaaw2459

[26] Fischer T, Hayn A, Mierke CT. Fast and reliable advanced two-step pore-size analysis of biomimetic 3D extracellular matrix scaffolds. Sci Rep, 2019, 9 8352

[27] Kraehenbuehl TP, Ferreira LS, Zammaretti P, Hubbell JA, Langer R. Cell-responsive hydrogel for encapsulation of vascular cells. Biomaterials, 2009, 30 4318

[28] Xu L, Bai E, Zhu Y, Qin J, Du X, Huang H. pH-responsive hydrogel as a potential oral delivery system of Baicalin for prolonging gastroprotective activity. Pharmaceutics, 2023, 15 257

[29] Liu W, Ye J, Wang Y, Xu X, Gao Y, Liu K, Gao J, Lin Y, Cui L, Wu Q, Yang H, Zhang J. Multimodal antibacterial E-Skin patch driven by oxidative stress for real-time wound-status monitoring and integrated treatment of chronic wounds. Adv Funct Mater, 2025, 35 2424698

[30] Yu S, Duan Y, Zuo X, Chen X, Mao Z, Gao C. Mediating the invasion of smooth muscle cells into a cell-responsive hydrogel under the existence of immune cells. Biomaterials, 2018, 180 193

[31] Buckley C, Ibrahim R, Giordano F, Xu N, Sems B, Wang H. Sacrificial strategy towards the formation of vascular-like networks in volumetric tissue constructs. BME Mat, 2025, 3e12118

[32] Ooi HW, Hafeez S, Van Blitterswijk CA, Moroni L, Baker MB. Hydrogels that listen to cells: a review of cell-responsive strategies in biomaterial design for tissue regeneration. Mater Horiz, 2017, 4 1020

[33] Xu R, Ooi HS, Bian L, Ouyang L, Sun W. Dynamic hydrogels for biofabrication: a review. Biomaterials, 2025, 320 123266

[34] Hull SM, Lou J, Lindsay CD, Navarro RS, Cai B, Brunel LG, Westerfield AD, Xia Y, Heilshorn SC. 3D bioprinting of dynamic hydrogel bioinks enabled by small molecule modulators. Sci Adv, 2023, 9: eade7880

[35] Yin B, Gosecka M, Bodaghi M, Crespy D, Youssef G, Dodda JM, Wong SHD, Imran AB, Gosecki M, Jobdeedamrong A, Afzali Naniz M, Zolfagharian A. Engineering multifunctional dynamic hydrogel for biomedical and tissue regenerative applications. Chem Eng J, 2024, 487 150403

[36] Chrisnandy A, Blondel D, Rezakhani S, Broguiere N, Lutolf MP. Synthetic dynamic hydrogels promote degradation-independent in vitro organogenesis. Nat Mater, 2022, 21: 479

[37] Xu R, Dou B, Yu S, Wang Z, Zhang Y, Leng L, Ouyang L, Sun W. Enabling 3D printability and vascular morphogenesis with double network dynamic hydrogels. Mater Today, 2025, 84: 10

[38] Hausmann MK, Rühs PA, Siqueira G, Läuger J, Libanori R, Zimmermann T, Studart AR. Dynamics of cellulose nanocrystal alignment during 3D printing. ACS Nano, 2018, 12: 6926

[39] Zheng F, Derby B, Wong J. Fabrication of microvascular constructs using high resolution electrohydrodynamic inkjet printing. Biofabrication, 2021, 13 035006

[40] Kessel B, Lee M, Bonato A, Tinguely Y, Tosoratti E, Zenobi M. 3D bioprinting of macroporous materials based on entangled hydrogel microstrands. Adv Sci, 2020, 7: 2001419

[41] Matera DL, DiLillo KM, Smith MR, Davidson CD, Parikh R, Said M, Wilke CA, Lombaert IM, Arnold KB, Moore BB, Baker BM. Microengineered 3D pulmonary interstitial mimetics highlight a critical role for matrix degradation in myofibroblast differentiation. Sci Adv, 2020, 6: eabb5069

[42] Yao X, Ding J. Effects of microstripe geometry on guided cell migration. ACS Appl Mater Interfaces, 2020, 12: 27971

[43] Taymour R, Kilian D, Ahlfeld T, Gelinsky M, Lode A. 3D bioprinting of hepatocytes: core-shell structured co-cultures with fibroblasts for enhanced functionality. Sci Rep, 2021, 11: 5130

[44] Sun Y, Sheng R, Cao Z, Liu C, Li J, Zhang P, Du Y, Mo Q, Yao Q, Chen J, Zhang W. Bioactive fiber-reinforced hydrogel to tailor cell microenvironment for structural and functional regeneration of myotendinous junction. Sci Adv, 2024, 10: eadm164

[45] Han X, Su J, Li J, Zhang H, Liu K. Bio-inspired and protein-based elastomeric materials. PS&T, 2026, 2: 6

[46] Koeck KS, Salehi S, Humenik M, Scheibel T. Processing of continuous non-crosslinked collagen fibers for microtissue formation at the muscle-tendon interface. Adv Funct Mater, 2022, 32: 2112238

[47] Guo P, Dong L, Xue B, Cao Y, Yang J. From light to life: molecular mechanisms and macroscopic transformations in photoresponsive hydrogels. PS&T, 2025, 1: 812

[48] Chao Y, Shum HC. Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications. Chem Soc Rev, 2020, 49: 114

[49] Lee J, Lee H, Jin E-J, Ryu D, Kim GH. 3D bioprinting using a new photo-crosslinking method for muscle tissue restoration. npj Regen Med., 2023, 8: 1

[50] Yuan C, Jiang J, Zhang X, Gu L, Wang X, Shao L. Direct 3D printing of freeform anisotropic bioactive structure based on shear-oriented ink system. Biofabrication, 2024, 16 045011

[51] Tang G, Luo Z, Lian L, Guo J, Maharjan S, Garciamendez-Mijares CE, Wang M, Li W, Zhang Z, Wang D, Xie M, Ravanbakhsh H, Zhou C, Kuang X, Hou Y, Yu X, Zhang YS. Liquid-embedded (bio)printing of alginate-free, standalone, ultrafine, and ultrathin-walled cannular structures. PNAS, 2023, 120: e2206762120

[52] Ying G-L, Jiang N, Maharjan S, Yin Y-X, Chai R-R, Cao X, Yang J-Z, Miri AK, Hassan S, Zhang YS. Aqueous two-phase emulsion bioink-enabled 3D bioprinting of porous hydrogels. Adv Mater, 2018, 30: 1805460

[53] Lien S-M, Ko L-Y, Huang T-J. Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering. Acta Biomater, 2009, 5: 670

[54] Rommel D, Mork M, Vedaraman S, Bastard C, Guerzoni LPB, Kittel Y, Vinokur R, Born N, Haraszti T, De Laporte L. Functionalized microgel rods interlinked into soft macroporous structures for 3D cell culture. Adv Sci, 2022, 9: 2103554

[55] Fang J, Xu B, Jin X, Chen F, Liu S, Liu S, Wang S, Zhang F, Song K, Wang J, Nan L, Liu J. Nerve guide conduits integrated with fisetin-loaded chitosan hydrogels for reducing oxidative stress, inflammation, and nerve regeneration. Macromol Biosci, 2024

[56] Zhang J, Li F, Gao X, Qiu W, Xia B, He S, Zhang Y, Huang X, Liu B, Huang J, Ding J, Yang H. Bamboo-inspired composite conduit accelerates peripheral nerve regeneration through synergistic oriented structure and piezoelectricity. Adv Mater, 2026, 38 e09425

[57] Sun Y, Zhang J, Gu Y, Liu T, Chen L. Biomineralized MnO₂ nanoparticle-constituted hydrogels promote spinal cord injury repair by modulating redox microenvironment and inhibiting ferroptosis. Pharmaceutics, 2024, 16: 1057

[58] Wang H, Tang Q, Lu Y, Chen C, Zhao Y, Xu T, Yang C, Chen X. Berberine-loaded MSC-derived sEVs encapsulated in injectable GelMA hydrogel for spinal cord injury repair. Int J Pharm, 2023, 643 123283

[59] Fang J, Nan L, Song K, Weng Z, Shan J, Shahin V, Liu J, Qian Y. Application and progress of bionic scaffolds in nerve repair: a narrative review. ATN, 2024, 1: 43

[60] Du L, Zhang H, Zhao Z, Ma X, Huang J, Huang J, Wu C. Injectable scaffolds with a hierarchically porous structure and augmented paracrine activity for minimally invasive precision medicine. Mater Horiz, 2025, 12: 7370

[61] Zauchner D, Müller MZ, Horrer M, Bissig L, Zhao F, Fisch P, Lee SS, Zenobi-Wong M, Müller R, Qin X-H. Synthetic biodegradable microporous hydrogels for in vitro 3D culture of functional human bone cell networks. Nat Commun, 2024, 15 5027

[62] Yamashita Y, Yanagisawa M, Tokita M. Sol–gel transition and phase separation in ternary system of gelatin-water–poly(ethylene glycol) oligomer. J Mol Liq, 2014, 200 47

[63] Ouyang L, Armstrong JPK, Lin Y, Wojciechowski JP, Lee-Reeves C, Hachim D, Zhou K, Burdick JA, Stevens MM. Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks. Sci Adv, 2020, 6 eabc5529

[64] Wang X, Jiang J, Yuan C, Gu L, Zhang X, Yao Y, Shao L. 3D bioprinting of GelMA with enhanced extrusion printability through coupling sacrificial carrageenan. Biomater Sci, 2024, 12 738

Funding

National Natural Science Foundation of China(52405319)

Natural Science Foundation of Ningbo(2022J085)

Natural Science Foundation of Zhejiang(ZCLZ26C1001)

Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems(GZKF-202323)

Fundamental Research Funds for the Provincial Universities of Zhejiang(SJLY2024004)

RIGHTS & PERMISSIONS

Donghua University, Shanghai, China

Just Accepted

This article has successfully passed peer review and final editorial review, and will soon enter typesetting, proofreading and other publishing processes. The currently displayed version is the accepted final manuscript. The officially published version will be updated with format, DOI and citation information upon launch. We recommend that you pay attention to subsequent journal notifications and preferentially cite the officially published version. Thank you for your support and cooperation.