Processing Nomex Nanofibers by Ionic Solution Blow-Spinning for Efficient High-Temperature Exhausts Treatment

Abstract

Hard-to-dissolve polymers provide next-generation alternatives for high-performance filter materials owing to their intrinsically high chemical stability, superior mechanical performance, and excellent high-temperature resistance. However, the mass production of hard-to-dissolve nanofibers still remains a critical challenge. A simple, scalable, and low-cost ionic solution blow-spinning method has herein been provided for the large-scale preparation of hard-to-dissolve Nomex polymeric nanofibers with an average diameter of nearly 100 nm. After rapidly dissolving Nomex microfibers in the lithium chloride/dimethylacetamide (LiCl/DMAc) solution system, the conductive solution can be stably and conductivity-independently processed into nanofibers. The method optimizes electrospinning and avoids spinnability degradation and potential safety hazards caused by high electrical conductivity. Owing to nanofibrous structure and high dipole moment, Nomex nanofibrous filters show a stable high filtration efficiency of 99.92% for PM_0.3 with a low areal density of 4.6 g m⁻², as well as a low-pressure drop of 189.47 Pa. Moreover, the flame-retardant filter can work at 250 °C and 280 °C for a long and short time without shrinking or burning, respectively, exhibiting a high filtration efficiency of 99.50% for PM_0.3−10.0. The outstanding properties and low cost enable the efficient capture of PM from various high-temperature exhausts, making Nomex nanofibrous membrane an even more ideal industrial-grade air filter than polypropylene, polytetrafluoroethylene, polyimide, and ceramic nanofibrous filters.

Graphical abstract

Hard-to-dissolve nanofibers provide alternatives for high-efficiency and low-resistant air filtration but are limited by the universality and economics of fabrication methods. A scalable and efficient ionic solution blow-spinning strategy has herein been proposed in preparing hard-to-dissolve nanofibrous filters.

Keywords

Nomex nanofibers / Solution blow-spinning / High-temperature filtration / Flame-retardant / Engineering / Materials Engineering

References

[1] LiaoX, DulleM, SilvaJMDSE, WehrspohnRB, AgarwalS, FörsterS, HouH, SmithP, GreinerA. High strength in combination with high toughness in robust and sustainable polymeric materials. Science, 2019, 366: 1376.

[2] VollrathF, KnightDP. Liquid crystalline spinning of spider silk. Nature, 2001, 410: 541.

[3] LiL, JiaC, LiuY, FangB, ZhuW, LiX, SchaeferLA, LiZ, ZhangF, FengX, HussainN, XiX, WangD, LinYH, WeiX, WuH. Nanograin–glass dual-phasic, elasto-flexible, fatigue-tolerant, and heat-insulating ceramic sponges at large scales. Mater Today, 2022, 54: 72.

[4] LiZ, CuiZ, ZhaoL, HussainN, ZhaoY, YangC, JiangX, LiL, SongJ, ZhangB, ChengZ, WuH. High-throughput production of kilogram-scale nanofibers by Kármán vortex solution blow spinning. Sci Adv, 2022, 8: eabn3690.

[5] ShealyO. Development of new fibre and sheet structures-nomex nylon and spun-bonded products. Textile Inst Ind, 1971, 9: 10

[6] TanJ, LuoY, ZhangM, YangB, LiF, RuanS. Dissolving and regeneration of meta-aramid paper: Converting loose structure into consolidated networks with enhanced mechanical and insulation properties. ACS Appl Mater Interfaces, 2021, 13: 16895.

[7] GuanQF, HanZM, YangHB, YangKP, LingZC, YinCH, ZhaoY-X, WangJ-L, YanB-B, MaT, HuB-C, LiC, PanX-F, ChenS-M, MaS-Y, YuS-H. Biomimetic design and mass production of sustainable multiscale cellulose fibers-based hierarchical filter materials for protective clothing. Adv Mater Technol, 2021, 6: 2100193.

[8] HuangT, ZhuY, ZhuJ, YuH, ZhangQ, ZhuM. Self-reinforcement of light, temperature-resistant silica nanofibrous aerogels with tunable mechanical properties. Adv Fiber Mater, 2020, 2: 338.

[9] HanZ, WangJ, LiuS, ZhangQ, LiuY, TanY, LuoS, GuoF, MaJ, LiP, MingX, GaoC, XuZ. Electrospinning of neat graphene nanofibers. Adv Fiber Mater, 2022, 4: 268.

[10] ZhangR, LiuC, HsuPC, ZhangC, LiuN, ZhangJ, LeeHR, LuY, QiuY, ChuS, CuiY. Nanofiber air filters with high-temperature stability for efficient PM_2.5 removal from the pollution sources. Nano Lett, 2016, 16: 3642.

[11] BrücknerS, LiuS, MiróL, RadspielerM, CabezaLF, LävemannE. Industrial waste heat recovery technologies: an economic analysis of heat transformation technologies. Appl Energy, 2015, 151: 157.

[12] HeidenreichS. Hot gas filtration—a review. Fuel, 2013, 104: 83.

[13] LiuK, LiuC, HsuP-C, XuJ, KongB, WuT, ZhangR, ZhouG, HuangW, SunJ, CuiY. Core–shell nanofibrous materials with high particulate matter removal efficiencies and thermally triggered flame retardant properties. ACS Cent Sci, 2018, 4: 894.

[14] LiuH, ZhangS, LiuL, YuJ, DingB. High-performance PM_0.3 air filters using self-polarized electret nanofiber/nets. Adv Funct Mater, 2020, 30: 1909554.

[15] HuangZ, DangC, SunZ, QiH. High-efficiency air filter media with a three-dimensional network composed of core–shell zeolitic imidazolate Framework-8@Tunicate nanocellulose for PM_0.3 removal. ACS Appl Mater Interfaces, 2021, 13: 57921.

[16] Badran G, Verdin A, Grare C, Abbas I, Achour D, Ledoux F, Roumie M, Cazier F, Courcot D, Lo Guidice J-M, Garçon G. Toxicological appraisal of the chemical fractions of ambient fine (PM_2.5–0.3) and quasi-ultrafine (PM_0.3) particles in human bronchial epithelial BEAS-2B cells. Environ Pollut. 2020;263:114620.

[17] Editoral. Clean air for a sustainable world. Nat Commun. 2021;12:5824.

[18] Wu X, Nethery RC, Sabath MB, Braun D, Dominici F. Air pollution and COVID-19 mortality in the United States: strengths and limitations of an ecological regression analysis. Sci Adv. 2020;6:eabd4049.

[19] MagazzinoC, MeleM, SchneiderN. The relationship between air pollution and COVID-19-related deaths: an application to three French cities. Appl Energy, 2020, 279. 115835

[20] PlailM. A conversation on the impacts and mitigation of air pollution. Nat Commun, 2021, 12: 5822.

[21] ZhangR, LiuC, ZhouG, SunJ, LiuN, HsuP-C, WangH, QiuY, ZhaoJ, WuT, ZhaoW, CuiY. Morphology and property investigation of primary particulate matter particles from different sources. Nano Res, 2018, 11: 3182.

[22] ZhangS, LiuH, TangN, AliN, YuJ, DingB. Highly efficient, transparent, and multifunctional air filters using self-assembled 2D nanoarchitectured fibrous networks. ACS Nano, 2019, 13: 13501.

[23] SrikrishnarkaP, KumarV, AhujaT, SubramanianV, SelvamAK, BoseP, JeniferSK, MahendranathA, GanayeeMA, NagarajanR, PradeepT. Enhanced capture of particulate matter by molecularly charged electrospun nanofibers. ACS Sustain Chem Eng, 2020, 8: 7762.

[24] Liu C, Hsu P-C, Lee H-W, Ye M, Zheng G, Liu N, Li W, Cui Y. Transparent air filter for high-efficiency PM_2.5 capture. Nat Commun. 2015;6:6205.

[25] LiP, WangC, ZhangY, WeiF. Air filtration in the free molecular flow regime: a review of high-efficiency particulate air filters based on carbon nanotubes. Small, 2014, 10: 4543.

[26] HuM, WangY, YanZ, ZhaoG, ZhaoY, XiaL, ChengB, DiY, ZhuangX. Hierarchical dual-nanonet of polymer nanofibers and supramolecular nanofibrils for air filtration with a high filtration efficiency, low air resistance and high moisture permeation. J Mater Chem A, 2021, 9: 14093.

[27] LiuH, ZhangS, LiuL, YuJ, DingB. High-performance filters from biomimetic wet-adhesive nanoarchitectured networks. J Mater Chem A, 2020, 8: 18955.

[28] Zhang A, Li H, Zhang A, Zhou J, Yan Y. High-temperature bearable polysulfonamide/polyacrylonitrile composite nanofibers for high-efficiency PM_2.5 filtration. Compos Commun. 2021;23:100582.

[29] PanT, LiuJ, DengN, LiZ, WangL, XiaZ, FanJ, LiuY. ZnO Nanowires@PVDF nanofiber membrane with superhydrophobicity for enhanced anti-wetting and anti-scaling properties in membrane distillation. J Membr Sci, 2021, 621. 118877

[30] LeeHR, LiaoL, XiaoW, VailionisA, RiccoAJ, WhiteR, NishiY, ChiuW, ChuS, CuiY. Three-dimensional analysis of particle distribution on filter layers inside N95 respirators by deep learning. Nano Lett, 2021, 21: 651.

[31] LiangH-W, WangL, ChenP-Y, LinH-T, ChenL-F, HeD, YuS-H. Carbonaceous nanofiber membranes for selective filtration and separation of nanoparticles. Adv Mater, 2010, 22: 4691.

[32] WangH, LinS, YangS, YangX, SongJ, WangD, WangH, LiuZ, LiB, FangM, WangN, WuH. High-temperature particulate matter filtration with resilient yttria-stabilized ZrO₂ nanofiber sponge. Small, 2018, 14: 1800258.

[33] LiebermannF. Dynamic cross flow filtration with Novoflow's single shaft disk filters. Desalination, 2010, 250: 1087.

[34] Zhang C, Jiang Y-X, Sun J-P, Xiao H, Shi M-W, Long J-J. Investigation of the influence of supercritical carbon dioxide treatment on meta-aramid fiber: thermal decomposition behavior and kinetics. J CO₂ Util. 2020;37:85.

[35] PanarM, BesteLF. Structure of poly(1,4-benzamide) solutions. Macromolecules, 1977, 10: 1401.

[36] ShogbonCB, BrousseauJL, ZhangH, BenicewiczBC, AkpaluYA. Determination of the molecular parameters and studies of the chain conformation of polybenzimidazole in DMAc/LiCl. Macromolecules, 2006, 39: 9409.

[37] WangB, TangY, WenZ, WangH. Dissolution and regeneration of polybenzimidazoles using ionic liquids. Eur Polym J, 2009, 45: 2962.

[38] ByunS, LeeSH, SongD, RyouM-H, LeeYM, ParkWH. A crosslinked nonwoven separator based on an organosoluble polyimide for high-performance lithium-ion batteries. J Ind Eng Chem, 2019, 72: 390.

[39] WangZY, FuZJ, ShaoDD, LuMJ, XiaQC, XiaoHF, SuBW, SunSP. Bridging the miscibility gap to fabricate delamination-free dual-layer nanofiltration membranes via incorporating fluoro substituted aromatic amine. J Membr Sci, 2020, 610. 118270

[40] SayyedAJ, DeshmukhNA, PinjariDV. A critical review of manufacturing processes used in regenerated cellulosic fibres: Viscose, cellulose acetate, cuprammonium, LiCl/DMAc, ionic liquids, and NMMO based lyocell. Cellulose, 2019, 26: 2913.

[41] Duchemin B-C. Structure, property and processing relationships of all-cellulose composites: University of Canterbury. 2008.

[42] JiaC, LiL, SongJ, LiZ, WuH. Mass production of ultrafine fibers by a versatile solution blow spinning method. Acc Chem Res, 2021, 2: 432

[43] Khalid B, Bai X, Wei H, Huang Y, Wu H, Cui Y. Direct blow-spinning of nanofibers on a window screen for highly efficient PM_2.5 removal. Nano Lett. 2017;17:1140.

[44] Frisch M, Trucks G, Schlegel H. Gaussian 09. Revision D. 01 [CP]. Pittsburgh USA: Gaussian. Inc., Wallingford CT. 2013.

[45] SannigrahiA, ArunbabuD, SankarRM, JanaT. Aggregation behavior of polybenzimidazole in aprotic polar solvent. Macromolecules, 2007, 40: 2844.

[46] YanJ, DongK, ZhangY, WangX, AboalhassanAA, YuJ, DingB. Multifunctional flexible membranes from sponge-like porous carbon nanofibers with high conductivity. Nat Commun, 2019, 10: 5584.

[47] FuQ, DuanC, YanZ, LiY, SiY, LiuL, YuJ, DingB. Nanofiber-based hydrogels: controllable synthesis and multifunctional applications. Macromol Rapid Commun, 2018, 39: 1800058.

[48] HuangY, SongJ, YangC, LongY, WuH. Scalable manufacturing and applications of nanofibers. Mater Today, 2019, 28: 98.

[49] GuanQ-F, HanZ-M, LingZ-C, YangH-B, YuS-H. Sustainable wood-based hierarchical solar steam generator: A biomimetic design with reduced vaporization enthalpy of water. Nano Lett, 2020, 20: 5699.

[50] SunY, MwandejeJB, WangatiaLM, ZabihiF, NedeljkovićJ, YangS. Enhanced photocatalytic performance of surface-modified TiO₂ nanofibers with rhodizonic acid. Adv Fiber Mater, 2020, 2: 118.

[51] LiZ, SongJ, LongY, JiaC, LiuZ, LiL, YangC, LiuJ, LinS, WangH, LiuY, FangM, WuH. Large-scale blow spinning of heat-resistant nanofibrous air filters. Nano Res, 2020, 13: 861.

[52] DongY, ZhengY, ZhangK, YaoY, WangL, LiX, YuJ, DingB. Electrospun nanofibrous materials for wound healing. Adv Fiber Mater, 2020, 2: 212.

[53] KimJ, Chan HongS, BaeGN, JungJH. Electrospun magnetic nanoparticle-decorated nanofiber filter and its applications to high-efficiency air filtration. Environ Sci Technol, 2017, 51: 11967.

[54] XuW, HuX, ZhuangS, WangY, LiX, ZhouL, ZhuS, ZhuJ. Flexible and salt resistant janus absorbers by electrospinning for stable and efficient solar desalination. Adv Energy Mater, 2018, 8: 1702884.

[55] MoonJ, BuiTT, JangS, JiS, ParkJT, KimM-G. A highly efficient nanofibrous air filter membrane fabricated using electrospun amphiphilic PVDF-g-POEM double comb copolymer. Sep Purif Rev, 2021, 279. 119625

[56] ZhangX, LiuJ, ZhangH, HouJ, WangY, DengC, HuangC, JinX. Multi-layered, corona charged melt blown nonwovens as high performance PM_0.3 air filters. Polymers, 2021, 13: 485.

[57] WangN, RazaA, SiY, YuJ, SunG, DingB. Tortuously structured polyvinyl chloride/polyurethane fibrous membranes for high-efficiency fine particulate filtration. J Colloid Interface Sci, 2013, 398: 240.

[58] WangN, ZhuZ, ShengJ, Al-DeyabSS, YuJ, DingB. Superamphiphobic nanofibrous membranes for effective filtration of fine particles. J Colloid Interface Sci, 2014, 428: 41.

[59] JiangZ, ZhangH, ZhuM, LvD, YaoJ, XiongR, HuangC. Electrospun soy-protein-based nanofibrous membranes for effective antimicrobial air filtration. J Appl Polym Sci, 2018, 135: 45766.

[60] WangY, LiW, XiaY, JiaoX, ChenD. Electrospun flexible self-standing γ-alumina fibrous membranes and their potential as high-efficiency fine particulate filtration media. J Mater Chem A, 2014, 2: 15124.

[61] XuW, FuW, MengX, TangM, HuangC, SunY, DaiY. One stone two birds: a sinter-resistant TiO₂ nanofiber-based unbroken mat enables PM capture and in situ elimination. Nanoscale, 2021, 13: 20564.

[62] ChenX, WangW, LiS, JiaoC. Fire safety improvement of para-aramid fiber in thermoplastic polyurethane elastomer. J Hazard Mater, 2017, 324: 789.

[63] SuL, NiuM, LuD, CaiZ, LiM, WangH. A review on the emerging resilient and multifunctional ceramic aerogels. J Mater Sci Technol, 2021, 75: 1.

[64] ZhangJ, GongS, WangC, JeongD-Y, WangZL, RenK. Biodegradable electrospun poly(lactic acid) nanofibers for effective PM_2.5 removal. Macromol Mater Eng, 2019, 304: 1900259.

[65] WhitakerS. Flow in porous media I: a theoretical derivation of Darcy's law. Transp Porous Media, 1986, 1: 3.

[66] ChenCY. Filtration of aerosols by fibrous media. Chem Rev, 1955, 55: 595.

[67] LeeS, ChoAR, ParkD, KimJK, HanKS, YoonI-J, LeeMH, NahJ. Reusable polybenzimidazole nanofiber membrane filter for highly breathable PM_2.5 dust proof mask. ACS Appl Mater Interfaces, 2019, 11: 2750.

[68] XuJ, LiuC, HsuP-C, LiuK, ZhangR, LiuY, CuiY. Roll-to-roll transfer of electrospun nanofiber film for high-efficiency transparent air filter. Nano Lett, 2016, 16: 1270.

[69] SongJ, LiZ, WuH. Blowspinning: a new choice for nanofibers. ACS Appl Mater Interfaces, 2020, 12: 33447.

[70] Hung C-H, Leung WW-F. Filtration of nano-aerosol using nanofiber filter under low Peclet number and transitional flow regime. Sep Purif Rev. 2011;79:34.

[71] ZhangZ, LiuBYH. Experimental study of aerosol filtration in the transition flow regime. Aerosol Sci Technol, 1992, 16: 227.

[72] International organization for standardization. ISO 16890: air filters for general ventilation. Switzerland. 2016.

[73] SchoentalR, GlBbardS. Carcinogens in chinese incense smoke. Nature, 1967, 216: 612.

Funding

National Natural Science Foundation of China(51788104)

Natural Science Foundation of Beijing Municipality(JQ19005)

China Postdoctoral Science Foundation(2021M691713)

RIGHTS & PERMISSIONS

Donghua University, Shanghai, China