Improvement of the technology of cutting modified globoidal gears with localized contact patch

B. F Fedotov; S. V Dumilin; N. N Schegolkov; V. N Belyakov

doi:10.17816/2074-0530-67769

Izvestiya MGTU MAMI ›› 2014, Vol. 8 ›› Issue (1-2) :96 -99. DOI: 10.17816/2074-0530-67769

Articles

research-article

Improvement of the technology of cutting modified globoidal gears with localized contact patch

Author information +

History +

PDF

Abstract

The article describes the possibilities of improving the technology of manufacture of modified globoidal gears with localized contact patch. A technology of modified globoid gear, localization of a contact patch, and design of the cutting tool for cutting of globoidal worms and gears are developed.

Keywords

globoidal gear / cone-worm unit / program of calculation of gear geometry / technology / mechanical processing

Cite this article

Download citation ▾

B. F Fedotov, S. V Dumilin, N. N Schegolkov, V. N Belyakov. Improvement of the technology of cutting modified globoidal gears with localized contact patch. Izvestiya MGTU MAMI, 2014, 8(1-2): 96-99 DOI:10.17816/2074-0530-67769

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	ГОСТ 17696-89. Передачи глобоидные. Расчет геометрии. Издательство стандартов. 1990.

[2]	Способ нарезания модифицированных витков глобоидных червяков. Авт. св. № 61121/ Коган Г.И., Копф И.А., Сорокин Г.И., Федотов Б.Ф.: БИ, 1970, № 4.

[3]	Способ изготовления колеса модифицированной глобоидной передачи. Авт. Св. СССР, № 1328092, 24.03.86./ Федотов Б.Ф.: БИ 1987, № 29.

[4]	ГОСТ 24438-80. Передачи червячные глобоидные. Исходный червяк и исходный производящий червяк. Издатель стандартов. 1980.