Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part

V. M. Nikitenko

doi:10.17816/2074-0530-67685

Izvestiya MGTU MAMI ›› 2014, Vol. 8 ›› Issue (1-2) : 46 -49. DOI: 10.17816/2074-0530-67685

Articles

research-article

Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part

V. M. Nikitenko

Author information +

History +

PDF

Abstract

The article considers the issues of forming of box-shaped parts with a hole in the bottom by flanging drawing, having character and high potential of use in industrial enterprises.

Keywords

metal utilization factor / drawing -flanging / forging / production efficiency

Cite this article

Download citation ▾

V. M. Nikitenko. Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part. Izvestiya MGTU MAMI, 2014, 8(1-2): 46-49 DOI:10.17816/2074-0530-67685

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Металлосберегающие технологии штамповки деталей с отверстием в донной части с использованием вытяжки и отбортовки/ Ю.А. Титов, А. Ш. Мурасов, В.М. Никитенко: М. Заготовительные производства в машиностроении. - 2007.- №5.- с. 32-34.

[2]	Моделирование процесса вытяжки-отбортовки при изготовлении коробчатых деталей с фланцем и отверстием в донной части/ В. И. Филимонов, В.М. Никитенко //М. Технология металлов.- 2009.- №2.- с. 11-17.