Projecting of the generatrix of tooth profile for a rotary ripper
A F Zhuk , A A Soloveychik
Tractors and Agricultural Machinery ›› 2009, Vol. 76 ›› Issue (7) : 41 -43.
Analytical dependences were suggested for rear and operational verges' sideviews' designing for minimal power consuming rotor ripper's cog. The rear verge's sideview's shaping was carried on with its soil non-contortion work requirements' meeting. And the operational verge's - on a basis of a step-by-step algorithm, that provides its movement in the soil by minimal vertical workload with given (optimal) bias angle or its alteration's law.
rotor ripper / plough / tooth profile / back and working edges of a tooth / designing / radius-vector / trajectory / kinematics parameter
| [1] |
Синеоков Г.Н., Панов И.М. Теория и расчет почвообрабатывающих машин. - М.: Машиностроение, 1977. |
Zhuk A.F., Soloveychik A.A.
/
| 〈 |
|
〉 |
PDF
