Research into biodegradable polymeric stents: a review of experimental and modelling work

Abstract

Bioresorbable stents (BRSs) are regarded as the next-generation medical devices to treat blocked or diseased arteries. The use of BRSs aims to reduce the risk of late stent thrombosis and long-term tissue inflammation associated with permanent metallic stents. BRSs are designed to relieve symptoms immediately and also provide mechanical support for an appropriate time period before they are fully absorbed by human body. To promote clinical adoption of BRSs or even to substitute metallic stents, the mechanical performance of BRSs needs to be thoroughly investigated and quantitatively characterised, especially over the full period of degradation. This paper offers a review of current research status of polymeric BRSs, covering both experimental and modelling work. Review of experimental studies highlighted the effects of stent designs and materials on the behaviour of polymeric BRSs. Computational work was able to simulate crimping, expansion and degradation of polymeric BRSs and the results were useful for performance assessment. In summary, the development of polymeric BRSs is still at an early stage, and further research is urgently required for a better understanding and control of their mechanical performance.

Keywords

Bioresorbable stents / mechanical performance / degradation / experimental studies / computational work

References

[1] Moore JEJr,Rajagopal KR.Biodegradable stents: biomechanical modelling challenges and opportunities.Cardiovasc Eng Technol2010;1:52-65

[2] Hoffmann R.Coronary in-stent restenosis - predictors, treatment and prevention.Eur Heart J2000;21:1739-49

[3] Pfisterer ME.Late stent thrombosis after drug-eluting stent implantation for acute myocardial infarction: a new red flag is raised.Circulation2008;118:1117-9

[4] Iakovou I,Bonizzoni E,Sangiorgi GM.Incidence, predictors, and outcome of thrombosis after successful implantation of drug-eluting stents.J Am Med Assoc2005;293:2126-30

[5] Joner M,Farb A,Kolodgie FD,Kutys R,Gold HK.Pathology of drug-eluting stents in humans: delayed healing and late thrombotic risk.J Am Coll Cardiol2006;48:193-202

[6] Yang TH,Park SG,Cho HJ,Kim SM,Kim DS.Clinical characteristics of stent fracture after sirolimus- eluting stent implantation.Int J Cardiol2009;131:212-6

[7] Flege C,Höges S,Borinski M,Hoffmann R,Meiners W,Wissenbach K.Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting.J Mater Sci Mater Med2013;24:241-55

[8] Ormiston JA.Bioabsorbable coronary stents.Circ Cardiovasc Interv2009;2:255-60

[9] Onuma Y.Bioresorbable scaffold: the advent of a new era in percutaneous coronary and peripheral revascularization?.Circulation2011;123:779-97

[10] Waksman R.Biodegradable stents: they do their job and disappear.J Invasive Cardiol2006;18:70-4

[11] Grabow N,Schultze C,Martin DP,Sternberg K.A biodegradable slotted tube stent based on poly (L-lactide) and poly (4-hydroxybutyrate) for rapid balloon-expansion.Ann Biomed Eng2007;35:2031-8

[12] Grabow N,Sternberg K,Schmohl K.Mechanical properties of a biodegradable balloon-expandable stent from poly (L-lactide) for peripheral vascular applications.J Med Devices2007;1:84-8

[13] Schmidt W,Brandt-Wunderlich C,Grabow N.In vitro performance investigation of bioresorbable scaffolds-standard tests for vascular stents and beyond.Cardiovasc Revasc Med2016;17:375-83

[14] Ormiston JA,Ubod B,Webster MW.An independent bench comparison of two bioresorbable drug-eluting coronary scaffolds (Absorb and DESolve) with a durable metallic drug-eluting stent (ML8/Xpedition).EuroIntervention2015;11:60-7

[15] Welch TR,Reisch J.Influence of thermal annealing on the mechanical properties of PLLA coiled stents.Cardiovasc Eng Technol2014;5:270-80

[16] Xu X,Zhang K,Shen Z,Jing X.Biodegradation of poly (l-lactide-co-glycolide) tube stents in bile.Polym Degrad Stab2008;93:811-7

[17] Hadaschik BA,Fazli L,Shalaby SW.Investigation of a novel degradable ureteral stent in a porcine model.J Urol2008;180:1161-6

[18] Yang G,Huang Y,Zhang M,Zhou J,Wang JY.Immersed multilayer biodegradable ureteral stent with reformed biodegradation: an in vitro experiment.J Biomater Polym2017;31:1235-44

[19] Gong Y,Gao C.In vitro and in vivo degradability and cytocompatibility of poly (l-lactic acid) scaffold fabricated by a gelatin particle leaching method.Acta Biomaterials2007;3:531-40

[20] Liu YS,Kienzle A,Feng QL.In vitro degradation of porous PLLA/pearl powder composite scaffolds.Mater Sci Eng C2014;38:227-34

[21] Rodrigues N,Ferreira AM,Dalgarno K.Manufacture and characterisation of porous PLA scaffolds.Procedia CIRP2016;49:33-8

[22] Zamiri P,Sharma U,Busold RH,Core LA.The biocompatibility of rapidly degrading polymeric stents in porcine carotid arteries.Biomaterials2010;31:7847-55

[23] Agrawal CM,Leopold DA.Evaluation of poly(L-lactic acid) as a material for intravascular polymeric stents.Biomaterials1992;13:176-82

[24] Zilberman M,Eberhart RC.Mechanical properties and in vitro degradation of bioresorbable fibers and expandable fiber-based stents.J Biomed Mater Res B2005;74:792-9

[25] Nuutinen JP,Reinikainen R.Mechanical properties and in vitro degradation of bioabsorbable self-expanding braided stents.J Biomate Sci2003;14:255-66

[26] Liu G,Wang D.Tailoring crystallization: towards high-performance poly (lactic acid).Adv Mater2014;26:6905-11

[27] Ormiston JA,Regar E,Thuesen L,Onuma Y,McGreevy R.A bioabsorbable everolimus-eluting coronary stent system for patients with single de-novo coronary artery lesions (ABSORB): a prospective open-label trial.Lancet2008;371:899-907

[28] Serruys PW,Ormiston JA,Regar E,Thuesen L,Chevalier B,Koolen J.Evaluation of the second generation of a bioresorbable everolimus drug-eluting vascular scaffold for treatment of de novo coronary artery stenosis clinical perspective.Circulation2010;122:2301-12

[29] Serruys PW,van Geuns RJ,Dudek D,Chevalier B,McClean D,Windecker S.A polylactide bioresorbable scaffold eluting everolimus for treatment of coronary stenosis.J Ame Col Cardio2016;67:766-76

[30] Lane JP,Sheehy AJ,Frie MP,Rapoza RJ.Lumen gain and restoration of pulsatility after implantation of a bioresorbable vascular scaffold in porcine coronary arteries.Cardiovas Interven2014;7:688-95

[31] Chua SD,Hashmi MSJ.Finite element simulation of stent and balloon interaction.J Mater Pro Tech2003;143:591-7

[32] Lally C,Prendergast PJ.Cardiovascular stent design and vessel stresses: a nite element analysis.J Biomech2005;38:1574-81

[33] Schiavone A,Abdel-Wahab AA.Effects of material, coating, design and plaque composition on stent deployment inside a stenotic artery -- nite element simulation.Mater Sci Eng C Mater Biol Appl2014;42:479-88

[34] Pauck RG.Computational analysis of the radial mechanical performance of PLLA coronary artery stents.Med Eng Phys2015;37:7-12

[35] Debusschere N,Dubruel P,De Beule M.A finite element strategy to investigate the free expansion behaviour of a biodegradable polymeric stent.J Biomech2015;48:2012-8

[36] Wang Q,Zhao Y,Cai T.Computational and experimental investigation into mechanical performances of poly-L-lactide acid (PLLA) coronary stents.J Mech Behav Biomed Mater2017;65:415-27

[37] Shanahan C,Tiernan P.Viscoelastic braided stent: finite element modelling and validation of crimping behaviour.Mater Design2017;121:143-53

[38] Schiavone A,Hossainy S.Computational analysis of mechanical stress-strain interaction of a bioresorbable scaffold with blood vessel.J Biomech2016;49:2677-83

[39] Soares JS,Rajagopal KR.Modeling of deformation-accelerated breakdown of polylactic acid biodegradable stents.J Med Devices2010;4:410-7

[40] Luo Q,Li Z,Zhang W,Chang Z.Degradation model of bioabsorbable cardiovascular stents.PLoS One2014;9:e110278 PMCID:PMC4217724

[41] Qiu T,Abunassar C,Zhao LG.Effect of two-year degradation on mechanical interaction between a bioresorbable scaffold and blood vessel.J Mech Behav Biomed Mater2017;78:254

[42] Farooq V,Serruys PW.Restenosis delineating the numerous causes of drug-eluting stent restenosis.Circ Cardiovasc Interv2010;4:195-205

[43] Imani SM,Ghasemi SE,Mahdinejad J.Analysis of the stent expansion in a stenosed artery using finite element method: application to stent versus stent study.Proc Inst Mech Eng H2014;228:996-1004

[44] Soares JS,Rajagopal KR.Constitutive framework for biodegradable polymers with applications to biodegradable stents.Asaio2008;54:295-301

[45] Vieira AC,Ferra JM,Guedes RM.Mechanical study of PLA-PCL fibers during in vitro degradation.J Mechan Behar Biomed Mater2011;4:451-60

[46] Grabow N,Schultze C,Martin DP,Sternberg K.A biodegradable slotted tube stent based on poly(L-lactide) and poly(4-hydroxybutyrate) for rapid balloon-expansion.Ann Biomed Eng2007;35:2031-8

[47] Grabow N,Sternberg K,Kramer S.Mechanical properties of laser cut poly(L-lactide) micro-specimens: implications for stent design, manufacture, and sterilization.ASME J Biomechan Eng2008;127:25-31

[48] Moore JEJr,Rajagopal KR.Biodegradable stents: biomechanical modeling challenges and opportunities.Cardiovas Eng Tech2015;1:52-65

[49] Wu W.Experimental data confirm numerical modeling of the degradation process of magnesium alloys stents.Acta Biomateralia2013;9:8730-9

[50] Qiu TY,Zhao LG.A computational study of crimping and expansion of bioresorbable polymeric stents.Mech Time-Depen Mater2017;6:1-18