Crimping and deployment of metallic and polymeric stents -- finite element modelling

Abstract

Aim: This paper aims to compare the mechanical performance of metallic (Xience) and bioresorbable polymeric (Elixir) stents during the process of crimping and deployment.

Methods: Finite element software ABAQUS was used to create the geometrical models and meshes for the balloon, stent and diseased artery. To simulate the crimping of stents, 12 rigid plates were generated around the stent and subjected to radially enforced displacement. The deployment of both stents was simulated by applying internal pressure to the balloon, where hard contacts were defined between balloon, stent and diseased artery.

Results: Elixir stent exhibited a lower expansion rate than Xience stent during deployment. The stent diameter achieved after balloon deflation was found smaller for Elixir stent due to higher recoiling. Lower level of stresses was found in the plaque and artery when expanded by Elixir stent. Reduced expansion, increased dogboning and decreased vessel stresses were obtained when considering the crimping-generated residual stresses in the simulations.

Conclusion: There is a challenge for polymeric stents to match the mechanical performance of metallic stents. However, polymeric stents impose lower stresses to the artery system due to less property mismatch between polymers and arterial tissues, which could be clinically beneficial.

Keywords

Polymeric stents / metallic stents / finite element / crimping / deployment

References

[1] Hoffmann R.Coronary in-stent restenosis - predictors, treatment and prevention..Eur Heart J2000;21:1739-49

[2] Joner M,Farb A,Kolodgie FD,Kutys R,Gold HK.Pathology of drug-eluting stents in humans: delayed healing and late thrombotic risk..J Am Coll Cardiol2006;48:193-202

[3] Yang TH,Park SG,Cho HJ,Kim SM,Kim DS.Clinical characteristics of stent fracture after sirolimus-eluting stent implantation..Int J Cardiol2009;131:212-6

[4] Flege C,Höges S,Borinski M,Hoffmann R,Meiners W,Wissenbach K.Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting..J Mater Sci Mater Med2013;24:241-55

[5] Ormiston JA.Bioabsorbable coronary stents..Circ Cardiovasc Interv2009;2:255-60

[6] Onuma Y.Bioresorbable scaffold: the advent of a new era in percutaneous coronary and peripheral revascularization?.Circulation2011;123:779-97

[7] Waksman R.Biodegradable stents: they do their job and disappear..J Invasive Cardiol2006;18:70-4

[8] Serruys PW,Dudek D,Carrié D,Dominici M,Haude M,Veldhof S,Staehr P,Ishibashi Y,Onuma Y.A bioresorbable everolimus-eluting scaffold versus a metallic everolimus-eluting stent for ischaemic heart disease caused by de-novo native coronary artery lesions (ABSORB II): an interim 1-year analysis of clinical and procedural secondary outcomes from a randomised controlled trial..Lancent2015;385:43-54

[9] Gao R,Banning A,DŽavík V,Jeong MH,Spaulding C.One-year outcome of small-vessel disease treated with sirolimus-eluting stents: a subgroup analysis of the e-SELECT registry..J Interv Cardiol2013;26:163-72

[10] Agrawal CM,Leopold DA.Evaluation of poly (L-lactic acid) as a material for intravascular polymeric stents..Biomaterials1992;13:176-82

[11] Nuutinen JP,Reinikainen R.Mechanical properties and in vitro degradation of bioabsorbable self-expanding braided stents..J Biomater Sci Polym Ed2003;14:255-66

[12] Bünger CM,Sternberg K,Ketner L,Kreutzer HJ,Nienaber CA,Schareck W.Sirolimus-eluting biodegradable poly-L-lactide stent for peripheral vascular application: a preliminary study in porcine carotid arteries..J Surg Res2007;139:77-82

[13] Verheye S,Stewart J,Sanidas E,Costa Jr JR,Abizaid AS,Morrison L,Bhat V,Abizaid A.A next-generation bioresorbable coronary scaffold system: from bench to first clinical evaluation: 6-and 12-month clinical and multimodality imaging results..JACC Cardiovasc Interv2014;7:89-99

[14] Chua SND,Hashmi MSJ.Finite element simulation of stent and balloon interaction..J Mater Process Technol2003;143-144:591-7

[15] Lally C,Prendergast PJ.Cardiovascular stent design and vessel stresses: a finite element analysis..J Biomech2005;38:1574-81

[16] Gijsen FJ,Schievano S,Petrini L,Wentzel JJ,Serruys PW.Simulation of stent deployment in a realistic human coronary artery..Biomed Eng Online2008;7:23 PMCID:PMC2525649

[17] Imani SM,Ghasemi SE,Mahdinejad J.Analysis of the stent expansion in a stenosed artery using finite element method: application to stent versus stent study..Proc Inst Mech Eng H2014;228:996-1004

[18] Schiavone A,Abdel-Wahab AA.Effects of material, coating, design and plaque composition on stent deployment inside a stenotic artery -- finite element simulation..Mater Sci Eng C Mater Biol Appl2014;42:479-88

[19] Clune R,Robinson JC.NURBS modeling and structural shape optimization of cardiovascular stents..Struct Multidiscipl Optim2014;50:159-68

[20] Pauck RG.Computational analysis of the radial mechanical performance of PLLA coronary artery stents..Med Eng Phys2015;37:7-12

[21] Medtronic Technical Bulletin (2003) Advantages of cobalt alloy for coronary stents. Available from: http://wwwp.medtronic.com/newsroom/content/1110132739468.pdf [Last Accessed on 11-01-2017].

[22] Zahedmanesh H.Determination of the influence of stent strut thickness using the finite element method: implications for vascular injury and in-stent restenosis..Med Biol Eng Comput2009;47:385-93

[23] Gervaso F,Petrini L,Di Virgilio L.On the effects of different strategies in modelling balloon-expandable stenting by means of finite element method..J Biomech2008;41:1206-12

[24] Holzapfel GA,Ogden RW.A new constitutive framework for arterial wall mechanics and a comparative study of material models..J Elast Phys Sci Solids2000;61:1-48

[25] Holzapfel GA,Gasser CT.Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling..Am J Physiol Heart Circ Physiol2005;289:H2048-58

[26] Nolan DR,Destrade M,McGarry JP.A robust anisotropic hyperelastic formulation for the modelling of soft tissue..J Mech Behav Biomed Mater2014;39:48-60

[27] Migliavacca F,Colombo M,Pietrabissa R.Mechanical behavior of coronary stents investigated through the finite element method..J Biomech2002;35:803-11

[28] Cheng GC,Kamm RD,Lee RT.Distribution of circumferential stress in ruptured and stable atherosclerotic lesions. A structural analysis with histopathological correlation..Circulation1993;87:1179-87

[29] Li ZY,Trivedi RA,Graves MJ,Wang L.Stress analysis of carotid plaque rupture based on in vivo high resolution MRI..J Biomech2006;39:2611-22

[30] Lowe HC,Khachigian LM.Coronary in-stent restenosis: current status and future strategies..J Am Coll Cardiol2002;39:183-93

[31] Timmins LH,Clubb FJJr.Increased artery wall stress post-stenting leads to greater intimal thickening..Lab Invest2011;91:955-67 PMCID:PMC3103652

[32] Haga JH,Chien S.Molecular basis of the effects of mechanical stretch on vascular smooth muscle cells..J Biomech2007;40:947-60

[33] Chung IM,Schwartz SM,Reidy MA.Enhanced extracellular matrix accumulation in restenosis of coronary arteries after stent deployment..J Am Coll Cardiol2002;40:2072-81

[34] Sharkawi T,Lafont A,Vert M.Intravascular bioresorbable polymeric stents: a potential alternative to current drug eluting metal stents..J Pharm Sci2007;96:2829-37

[35] Möller D,Pyzalla A.Residual stresses in coronary artery stents..J Biomed Mater Res2001;58:69-74