Effects of Traffic Loads and Track Parameters on Rail Wear: A Case Study for Yenikapi–Ataturk Airport Light Rail Transit Line

Abstract

The aim of this study is to investigate the effects of traffic loads and track parameters, including track curvature, superelevation, and train speed, on vertical and lateral rail wear. The Yenikapi–Ataturk Airport Light Rail Transit (LRT) line in Istanbul was selected as a case study, and rail wear measurements were carried out accordingly. Passenger counts were performed in all wagons of the train on different days and time intervals to calculate the number of passengers carried in track sections between stations regarding traffic loads on the LRT line. Values of traffic load, track curvature, superelevation, and speed were determined for each kilometer where measurements of rail wear were conducted. A multiple linear regression analysis (MLRA) method was used to identify effective parameters on rail wear. Independent variables in MLRA for both vertical and lateral wear include traffic load, track curvature, superelevation, and train speed. The dependent variables in MLRA for vertical and lateral wear are the amount of vertical and lateral wear, respectively. The correlation matrix of the dependent and independent variables was analyzed before performing MLRA. Multicollinearity tests and cross-validation analyses were conducted. According to the results of MLRA for vertical and lateral wear, the obtained coefficients of determination indicate that a high proportion of variance in the dependent variables can be explained by the independent variables. Traffic load has a statistically significant effect on the amount of vertical and lateral rail wear. However, track curvature, superelevation, and train speed do not have a statistically significant effect on the amount of vertical or lateral rail wear.

Keywords

Vertical rail wear / Lateral rail wear / Traffic load / Correlation matrix / Multiple linear regression analysis

References

[1] Jin X, Wen Z, Xiao X, Zhou Z. A numerical method for prediction of curved rail wear. Multibody Syst Dyn, 2007, 18: 531-557

[2] Soleimani H, Moavenian M. Tribological aspects of wheel–rail contact: a review of wear mechanisms and effective factors on rolling contact fatigue. Urban Rail Transit, 2017, 3(4): 227-237

[3] Sadeghi J, Akbari B. Field investigation on effects of railway track geometric parameters on rail wear. J Zhejiang Univ Sci A, 2006, 7(11): 1846-1855

[4] Shebani A (2016) Prediction of wheel and rail wear using artificial neural networks. Doctoral Thesis, University of Huddersfield, Huddersfield

[5] Meghoe A, Loendersloot R, Tinga T. Rail wear and remaining life prediction using meta-models. Int J Rail Transp, 2019, 8(1): 1-26

[6] Olofsson U, Telliskivi T. Wear, plastic deformation and friction of two rail steels-a full-scale test and a laboratory study. Wear, 2003, 254: 80-93

[7] Shebani A, Iwnicki S. Prediction of wheel and rail wear under different contact conditions using artificial neural networks. Wear, 2018, 406–407: 173-184

[8] Xu J, Wang P, Wang J, An B, Chen R. Numerical analysis of the effect of track parameters on the wear of turnout rails in high-speed railways. Proc Inst Mech Eng F J Rail Rapid Transit, 2018, 232(3): 709-721

[9] Falamarzi A, Moridpour S, Nazem M. A review of rail track degradation prediction models. Aust J Civ Eng, 2019, 17(2): 152-166

[10] Costello SB, Premathilaka AS, Dunn RCM. Stochastic rail wear model for railroad tracks. Transp Res Rec, 2012, 2289(1): 103-110

[11] Zakeri JA, Shahriari S. Developing a deterioration probabilistic model for rail wear. Int J Traffic Transp Eng, 2012, 1(2): 13-18.

[12] Xu J, Wang P, Ma X, Qian Y, Chen R. Parameters studies for rail wear in high-speed railway turnouts by unreplicated saturated factorial design. J Central South Univ, 2017, 24: 988-1001

[13] Premathilaka A, Costello S, Dunn R. Development of a deterministic rail-wear prediction model. Road Transp Res, 2010, 19(1): 40-50.

[14] Jeong MC, Lee SJ, Cha K, Zi G, Kong JS. Probabilistic model forecasting for rail wear in Seoul metro based on Bayesian theory. Eng Fail Anal, 2019, 96: 202-210

[15] Wang J, Ren Z, Chen J, Chen L. Study on rail profile optimization based on the nonlinear relationship between profile and wear rate. Math Probl Eng, 2017

[16] Ahac M, Lakušić S. Yaghoubi H. Track gauge degradation modelling on small urban rail networks: zagreb tram system case study. Urban transport systems, 2017, Rijeka: InTech 1-20.

[17] Falamarzi A, Moridpour S, Nazem M, Hesami R. Rail degradation prediction models for tram system: Melbourne case study. J Adv Transp, 2018

[18] Elkhoury N (2018) Analysis and prediction of tram track degradation. Master Thesis, RMIT University, Melbourne

[19] Ahac M, Lakušić S. Tram track maintenance-planning by gauge degradation modelling. Transport, 2015, 30(4): 430-436

[20] Falamarzi A, Moridpour S, Nazem M, Hesami R (2017) Rail degradation predication: melbourne tram system case study. In: Australasian transport research forum 2017, Auckland

[21] Guler H, Jovanovic S, Evren G. Modelling railway track geometry deterioration. Proc Inst Civ Eng Transp, 2011, 164(2): 65-75

[22] Berawi ARB, Delgado R, Calçada R, Vale C. Evaluating track geometrical quality through different methodologies. Int J Technol, 2010, 1(1): 38-47

[23] Westgeest FP, Dekker R, Fischer RH. Berenguer C, Grall A, Guedes Soares C. Predicting rail geometry deterioration by regression models. Advances in safety, reliability and risk management, 2011, London: CRC Press 926-933

[24] Screen D, Parkinson J, Shilton C, Rjabovs A, Marinov M. Data analysis to study sub-threshold delays incurred by Tyne and Wear metro trains. Urban Rail Transit, 2020, 6: 93-103

[25] Darlton AO, Marinov M. Suitability of tilting technology to the Tyne and Wear metro system. Urban Rail Transit, 2015, 1: 47-68

[26] Kelley K, Maxwell SE. Hancock GR, Stapleton LM, Mueller RO. Multiple regression. The reviewer’s guide to quantitative methods in the social sciences, 2018 2 New York: Routledge 281-297.

[27] Metro Istanbul Inc. (2020) About Yenikapi–Ataturk Airport LRT line. http://www.metro.istanbul/Hatlarimiz/HatDetay?hat=M1A. Accessed 14 Apr 2020

[28] Metro Istanbul Inc. Directive on rail wear measurement, 2012, Istanbul: Istanbul Metropolitan Municipality Department of Transportation

[29] Esveld C. Modern railway track, 2001 2 Zaltbommel: MRT-Productions

[30] Barney G, Al-Sharif L. Elevator traffic handbook, 2003, London: Routledge

[31] López MV, Fabrizio MC, Plencovich MC. Barragués J, Morais A, Guisasola J. Multiple regression analysis. Probability and statistics, 2014, Boca Raton: CRC Press 416-468

[32] Cohen J. Statistical power analysis for the behavioral sciences, 1988 2 Hillsdale: Lawrence Erlbaum Associates Publishers

[33] Venter A, Maxwell SE. Tinsley HEA, Brown SD. Issues in the use and application of multiple regression analysis. Handbook of applied multivariate statistics and mathematical modeling, 2000, Cambridge: Academic Press 151-182

[34] Wetherill GB. Wetherill GB. Correlation. Intermediate statistical methods, 1981, Dordrecht: Springer 185-198

[35] Abdi H. Salkind NJ. Multiple correlation coefficient. Encyclopedia of measurement and statistics, 2007, Thousand Oaks: Sage Publications Inc. 1-8.

[36] Jensen AR. Jensen AR. Correlated chronometric and psychometric variables. Clocking the mind: mental chronometry and individual differences, 2006, Amsterdam: Elsevier 155-186

[37] Wetherill GB. Wetherill GB. Multiple regression: further analysis and interpretation. Intermediate statistical methods, 1981, Dordrecht: Springer 130-156

[38] Savin NE. Griliches Z, Intriligator MD. Multiple hypothesis testing. Handbook of econometrics, 1984, Amsterdam: Elsevier 827-879

[39] Siegel AF. Siegel AF. Multiple regression: predicting one variable from several others. Practical business statistics, 2017 7 Burlington: Academic Press 355-418.

[40] Bryman A, Cramer D. Quantitative data analysis with IBM SPSS 17, 18 & 19, 2011, London: Routledge

[41] Tamura R, Kobayashi K, Takano Y, Miyashiro R, Nakata K, Matsui T. Mixed integer quadratic optimization formulations for eliminating multicollinearity based on variance inflation factor. J Global Optim, 2019, 73: 431-446

[42] Fushiki T. Estimation of prediction error by using k-fold cross-validation. Stat Comput, 2011, 21: 137-146

[43] Morin K, Davis JL. Cross-validation: what is it and how is it used in regression. Commun Stat Theory Methods, 2017, 46(11): 5238-5251