Macro-micro coupled analysis of synchronous grouting in coarse-grained strata: CFD–DEM insights into ground settlement control and fabric evolution

Abstract

This study investigates the macro- and micro-mechanism of synchronous tail grouting in ground surface settlement (GSS) control of coarse-grained strata through a computational fluid dynamics-discrete element method (CFD–DEM) coupled model, focusing on two grouting port configurations (Type I: upper-lower symmetrical layout; Type II: lateral staggered distribution) in six-grouting-port shield machines. Analyzing particle contact characteristics and force chain evolution patterns, the connection between particle-scale behavior and macroscale GSS during grouting is elucidated. Key findings demonstrate that grouting duration is the primary factor for GSS development. Grout injection disrupted the particle contacts and force-chain networks above the tunnel center, weakening natural arching and redistributing interparticle forces. The central axis of the soil-arching effect exhibited a strong linear correlation with the spatial position of the uppermost grouting port. The soil located 0.25D–0.5D (where D represents the tunnel diameter) from the tunnel centerline horizontally, exhibited heightened sensitivity to grouting, with a low fabric anisotropy and oscillating principal direction sharply between 0° and 180°, reflecting pronounced displacement and isotropy. This study provides theoretical support for intelligent shield machine selection and grouting strategy optimization in geotechnical engineering, with significant implications for soil displacement control in complex strata.

Keywords

Synchronous grouting / CFD–DEM / Coarse-grained ground / Microstructure / Fabric evolution

References

[1] Anderson, T. B., & Jackson, R. (1967). Fluid mechanical description of fluidized beds. Equations of motion. Industrial & Engineering Chemistry Fundamentals, 6(4), 527-539.

[2] Bokkisa, S. V., Macedo, J., & Petalas, A. L. (2023). Fabric anisotropy effects on static liquefaction under constant shear drained loading. Computers and Geotechnics, 163, 105724.

[3] Burns, S., Piiroinen, P., & Hanley, K. (2019). Critical time step for DEM simulations of dynamic systems using a Hertzian contact model. International Journal for Numerical Methods in Engineering, 119(5), 432-451.

[4] Christoffersen, J., Mehrabadi, M. M., & Nemat-Nasser, S . (1981). A micromechanical description of granular material behavior. Journal of Applied Mechanics, 48(2), 339-344.

[5] Cundall, P. A., & Strack, O. D. L. (1979). A discrete numerical model for granular assemblies. Geotechnique, 29(1), 47-65.

[6] Ding, W. Q., Duan, C., Zhu, Y. H., Zhao, T. C., Huang, D. Z., & Li, P. N. (2019). The behavior of synchronous grouting in a quasi-rectangular shield tunnel based on a large visualized model test. Tunnelling and Underground Space Technology, 83, 409-424.

[7] Goniva, C., Kloss, C., Deen, N. G., Kuipers, J. A. M., & Pirker, S. (2012). Influence of rolling friction on single spout fluidized bed simulation. Particuology, 10(5), 582-591.

[8] Irani, N., Salimi, M., Golestaneh, P., Tafili, M., Wichtmann, T., & Lederer, J. (2024). Deep learning-based analysis of true triaxial DEM simulations: Role of fabric and particle aspect ratio. Computers and Geotechnics, 173, 106529.

[9] Kasper, T., & Meschke, G . (2006). A numerical study of the effect of soil and grout material properties and cover depth in shield tunnelling. Computers and Geotechnics, 33(4/5), 234-247.

[10] Kloss, C., Goniva, C., Hager, A., Amberger, S., & Pirker, S. (2012). Models, algorithms and validation for opensource DEM and CFD-DEM. Progress in Computational Fluid Dynamics, an International Journal, 12(2/3), 140-152.

[11] Koch, D., & Hill, R . (2001). Inertial effects in suspension and porous-media flows. Annual Review of Fluid Mechanics, 33(1), 619-647.

[12] Li, P. N., Ying, X., Shi, L., & Yu, D. H. (2021). Hydrodynamics analysis on fill diffusion in shield synchronous grouting based on CFD. Chinese Journal of Underground Space and Engineering, 17(S1), 126-132 (in Chinese).

[13] Liang, X. M., Ying, K. C., Ye, F., Su, E. J., Xia, T. H., & Han, X. B. (2022). Selection of backfill grouting materials and ratios for shield tunnel considering stratum suitability. Construction and Building Materials, 314, 125431.

[14] Liang, Y., Zhang, J., Lai, Z. S., Huang, Q. Y., & Huang, L. C. (2020). Temporal and spatial distribution of the grout pressure and its effects on lining segments during synchronous grouting in shield tunnelling. European Journal of Environmental and Civil Engineering, 24(1), 79-96.

[15] Liu, C., Cui, J., Zhang, Z. X., Liu, H., Huang, X., & Zhang, C. Q. (2021a). The role of TBM asymmetric tail-grouting on surface settlement in coarse-grained soils of urban area: Field tests and FEA modelling. Tunnelling and Underground Space Technology, 111, 103857.

[16] Liu, C., Zhu, D. L., Cui, J., Jing, L., & Huang, X. (2024a). Investigation on synchronous grouting process during shield tunneling in coarse grained ground using CFD-DEM approach. Computers and Geotechnics, 170, 106308.

[17] Liu, C., Zhu, D. L., Liu, H., Cui, J., Zhang, X. Y., Rehman, M. U., & Huang, X. Y. (2024b). Influence of synchronous grouting on surrounding sandy cobbles during shield tunnelling process: Insights from a scaled model test. Tunnelling and Underground Space Technology, 147, 105728.

[18] Liu, F. Z., Chen, W., Liu, C., Yang, Y. B., Wang, J., & Liu, Y. (2024c). The evolution of grouting pressure and ground deformation induced by synchronous grouting during shield tunneling in soft soil: An investigation based on scaled model test and CEL simulation. Canadian Geotechnical Journal, 62, 1-20.

[19] Liu, J., Li, P. N., Shi, L., Fan, J., Kou, X. Y., & Huang, D. Z. (2021b). Spatial distribution model of the filling and diffusion pressure of synchronous grouting in a quasi-rectangular shield and its experimental verification. Underground Space, 6(6), 650-664.

[20] Liu, X. L., Wang, F., Huang, J., Wang, S. J., Zhang, Z. Z., & Nawnit, K. (2019). Grout diffusion in silty fine sand stratum with high groundwater level for tunnel construction. Tunnelling and Underground Space Technology, 93, 103051.

[21] Liu, X. X., Shen, S. L., Xu, Y. S., & Zhou, A. N. (2020). A diffusion model for backfill grout behind shield tunnel lining. International Journal for Numerical and Analytical Methods in Geomechanics, 45(4), 457-477.

[22] O’reilly, M.P., & New, B.M. (1982). Settlements above tunnels in the United Kingdom-their magnitude and prediction (No. Monograph).

[23] Oda, M . (1972). Initial fabrics and their relations to mechanical properties of granular material. Soils and Foundations, 12(1), 17-36.

[24] Oda, M., Nasser, S. N., & Konishi, J. (1985). Stress-induced anisotropy in granular masses. Soils and Foundations, 25(3), 85-97.

[25] Peck, R.B. (1969). Deep excavations and tunnelling in soft ground. State of the Art Report, 7th International Conference on Soil Mechanics and Foundation Engineering. (pp. 225-290).

[26] Rong, X. N., Liu, X. D., Wen, Z., Lu, H., & Rong, X. L. (2022). Prediction of surface settlement induced by shield in sandy gravels stratum based on artificial neural networks. Chinese Journal of Underground Space and Engineering, 18(S2), 958-966 (in Chinese).

[27] Ruan, W. J. (2005). Research on diffusion of grouting and basic properties of grouts. Chinese Journal of Geotechnical Engineering, 27(1), 69-73 (in Chinese).

[28] Su, D., Yang, W. H., Lin, X. T., Zhang, X., Zhang, Z. Y., & Chen, X. S. (2024). Soil-carrying effect induced by super-large-diameter shallow-buried shield tunneling and treatment measures: A case study in Zhuhai, China. Tunnelling and Underground Space Technology, 153, 106037.

[29] Thornton, C., & Antony, S. J. (2000). Quasi-static shear deformation of a soft particle system. Powder Technology, 109(1/2/3), 179-191.

[30] Todaro, C., & Pace, F. (2022). Elastic properties of two-component grouts at short curing times: The role of bentonite. Tunnelling and Underground Space Technology, 130, 104756.

[31] Vångö, M., Pirker, S., & Lichtenegger, T. (2018). Unresolved CFD-DEM modeling of multiphase flow in densely packed particle beds. Applied Mathematical Modelling, 56, 501-516.

[32] Wang, S. M., He, C., Nie, L., & Zhang, G. C. (2019). Study on the long-term performance of cement-sodium silicate grout and its impact on segment lining structure in synchronous backfill grouting of shield tunnels. Tunnelling and Underground Space Technology, 92, 103015.

[33] Wang, S. M., Lin, Z. Y., Peng, X. Y., Wang, X. M., Tu, G., & Song, Z. H. (2022). Research and evaluation on Water-dispersion resistance of synchronous grouting slurry in shield tunnel. Tunnelling and Underground Space Technology, 129, 104679.

[34] Xiong, H., Yin, Z. Y., Zhao, J. D., & Yang, Y. (2021). Investigating the effect of flow direction on suffusion and its impacts on gap-graded granular soils. Acta Geotechnica, 16(2), 399-419.

[35] Yan, B., Wang, R., Ding, B. S., Dai, F., & Wang, Y. (2024). Numerical simulation analysis of tunnel backfill grout based on DEM-FDM coupling and particle inlet. Underground Space, 14, 285-299.

[36] Ye, F., Wang, B., Han, X., Liang, X., Ying, K. C., & Liang, X. M. (2020). Review of shield tunnel backfill grouting tests and its diffusion mechanism. China Journal of Highway and Transport, 33(12), 92-104 (in Chinese).

[37] Ye, F., Yang, T., Mao, J. H., Qin, X. Z., & Zhao, R. L. (2019). Half-spherical surface diffusion model of shield tunnel back-fill grouting based on infiltration effect. Tunnelling and Underground Space Technology, 83, 274-281.

[38] Zeng, Y., Njock, P. G. A., Xiong, W., Zhang, X. L., & Shen, S. L. (2023). Risks analysis of large diameter slurry shield tunneling in urban area. Underground Space, 13, 281-300.

[39] Zhang, A., Jiang, M., & Wang, D. (2023). Effect of fabric anisotropy on the cyclic liquefaction of sands: Insight from DEM simulations. Computers and Geotechnics, 155, 105188.

[40] Zhang, D. M., Ye, Z. W., Zhang, J. Z., Li, J. P., & Jia, J. W. (2022a). Influence of grouting on rehabilitation of an over-deformed shield tunnel lining in spatially variable soil. Computers and Geotechnics, 152, 104999.

[41] Zhang, S. S., Dai, Z. R., & Bai, Y. (2015). Model test research on distribution law of grout pressure for simultaneous backfill grouting during shield tunneling. China Railway Science, 36(5), 43-53 (in Chinese).

[42] Zhang, W. J., Qi, J. B., Zhang, G. L., Niu, R. J., Zhang, C., He, L. C., & Lyu, J. R. (2022b). Full-scale experimental study on failure characteristics of the key segment in shield tunnel with super-large cross-section. Tunnelling and Underground Space Technology, 129, 104671.

[43] Zhao, T. C., Ding, W. Q., Qiao, Y. F., & Duan, C. (2019). A large-scale synchronous grouting test for a quasi-rectangular shield tunnel: Observation, analysis and interpretation. Tunnelling and Underground Space Technology, 91, 103018.

[44] Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2007). Discrete particle simulation of particulate systems: Theoretical developments. Chemical Engineering Science, 62(13), 3378-3396.

[45] Zou, J. F., & Zuo, S. Q. (2017). Similarity solution for the synchronous grouting of shield tunnel under the vertical non-axisymmetric displacement boundary condition. Advances in Applied Mathematics and Mechanics, 9(1), 205-232.