Field monitoring and instrumentation in microtunnelling/pipe jacking: A review and future directions

Abstract

The popularity of trenchless techniques as a means of utility pipeline installation in urban environments, specifically microtunnelling/pipe-jacking, has increased in recent years due to its minimally-disruptive nature and reduced carbon footprint in comparison to conventional open-cut excavation methods. The response of pipes during the jacking process is complex and is governed by several factors, including ground conditions, the amount and distribution of lubrication, pipe and annulus size, pipeline misalignments and jacking force eccentricity, among others. Design practice remains based on empirical equations and previous drives through similar geology, resulting in uncertainty in jacking force estimates, thereby restricting adoption of the technique. In order to improve our understanding of the pipe-jacking process, pipes incorporating sensors providing real-time measurements of earth pressures, pore water pressures, axial strains and hoop strains can be used; but the number of such studies reported in the literature is small and the potential of instrumentation on routine projects is largely untapped. Moreover, jacking pipe monitoring practice lags behind the state-of-the-art instrumentation techniques used for monitoring other geotechnical infrastructure. The purpose of this paper is to provide a thorough review of learnings from instrumented pipe-jacking case studies and other supporting research, as well as to propose potential solutions to research gaps in the current state of design practice and field monitoring of pipe jacking projects.

Keywords

Trenchless technology / Microtunnelling / Pipe jacking / Instrumentation / Field monitoring

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

CRediT authorship contribution statement

Asad Wadood: Writing - original draft, Visualization, Formal analysis. Bryan A. McCabe: Writing - review & editing, Validation, Supervision, Project administration, Funding acquisition, Conceptualization. Brian B. Sheil: Writing - review & editing, Validation, Supervision, Conceptualization.

Declaration of competing interest

Dr. Bryan A. McCabe and Dr. Brian B. Sheil are editorial board members for Underground Space and were not involved in the editorial review or the decision to publish this article. All authors declare that there are no competing interests.

Acknowledgement

The first author is funded by the Science Foundation Ireland Research Centre in Applied Geosciences (SFI-iCRAG), with Ward and Burke Construction Limited as the industry partner.

References

[1] Albuquerque, P. J. R., Carvalho, D., & Massad, F. (2005). Bored, continuous flight auger and omega instrumented piles: behavior under compression. In Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (pp. 2075-2078). Osaka, Japan.

[2] Apoji, D., Sheil, B., & Soga, K. (2023). Shaping the future of tunneling with data and emerging technologies. Data-Centric Engineering, 4(3), e29.

[3] American Society of Civil Engineers (ASCE). (2015). ASCE/CI 36-2015: Standard design and construction guidelines for microtunneling. American Society of Civil Engineers.

[4] Barzegar, M., Blanks, S., Sainsbury, B. A., & Timms, W. (2022). MEMS technology and applications in geotechnical monitoring: a review. Measurement Science and Technology, 33(5), 052001.

[5] Batty, M. (2018). Digital twins. Environment and Planning B: Urban Analytics and City Science, 45(5), 817-820.

[6] Belsito, L., Ferri, M., Mancarella, F., Masini, L., Yan, J. Z., Seshia, A. A., Soga, K., & Roncaglia, A. (2016). Fabrication of high-resolution strain sensors based on wafer-level vacuum packaged MEMS resonators. Sensors and Actuators A: Physical, 239, 90-101.

[7] Bergeson, W. (2014). Review of long drive microtunneling technology for use on large scale projects. Tunnelling and Underground Space Technology, 39, 66-72.

[8] Britting, K.R. (1971). Unified error analysis of terrestrial inertial navigation systems. In Proceedings of Guidance, Control, Flight Mechanics Conference, New York, NY, USA, 16-18.

[9] Broere, W. (2016). Urban underground space: solving the problems of today's cities. Tunnelling and Underground Space Technology, 55, 245-248.

[10] Castro, R. C., Muindi, T. M., Hughes, G., & Albert, P. H. (2007). Pipe Jacking in Difficult Urban Waterfront Conditions. In Proceedings of Pipelines 2007:Advances and Experiences with Trenchless Pipeline Projects (pp. 1-12). Boston, Massachusetts.

[11] Chang, J. H. C. (2013). Wireless parylene-based retinal implant. [Doctoral dissertation, California Institute of Technology, USA].

[12] Chapman, D. N., & Ichioka, Y. (1999). Prediction of jacking forces for microtunnelling operations. Tunnelling and Underground Space Technology, 14(S1), 31-41.

[13] Cheng, W. C., Ni, J. C., Arulrajah, A., & Huang, H. W. (2018). A simple approach for characterising tunnel bore conditions based upon pipejacking data. Tunnelling and Underground Space Technology, 71, 494-504.

[14] Cheng, W. C., Ni, J. C., Shen, J. S. L., & Huang, H. W. (2017). Investigation into factors affecting jacking force:A case study. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 170(4), 322-334.

[15] Chesterton, D. (2019). Monitoring Microtunneling Construction Processes. [Master's thesis, University of Oxford, United Kingdom].

[16] Cheung, L. L. K., Soga, K., Bennett, P. J., Kobayashi, Y., Amatya, B., & Wright, P. (2010). Optical fibre strain measurement for tunnel lining monitoring. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 163(3), 119-130.

[17] Clarkson, T. E., & Thomson, J. C. (1983). Pipe-jacking: State-of-the art in UK and Europe. Journal of Transportation Engineering, 109(1), 57-72.

[18] Costa, Y. D., Zornberg, J. G., Benedito, B. S., & Costa, C. L. (2009). Failure mechanisms in sand over a deep active trapdoor. Journal of Geotechnical and Geoenvironmental Engineering, 135(11), 1741-1753.

[19] Cui, Q. L., Xu, Y. S., Shen, S. L., Yin, Z. Y., & Horpibulsuk, S. (2015). Field performance of concrete pipes during jacking in cemented sandy silt. Tunnelling and Underground Space Technology, 49, 336-344.

[20] Curran, B. G., & McCabe, B. A. (2011). Analysis of jacking force data for microtunnels in glacial till at Kilcock, Ireland. In Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering (pp.1627-1632).

[21] De Battista, N., Elshafie, M. Z. E. B., Soga, K., Williamson, M. G., Hazelden, G., & Hsu, Y. S. (2015). Strain monitoring using embedded distributed fibre optic sensors in a sprayed concrete tunnel lining during the excavation of cross-passages. In Proceedings of the 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (pp.1-3). Torino, Italy.

[22] De Battista, N., & Kechavarzi, C. (2021). Monitoring of piles and diaphragm walls with distributed fibre optic sensors. In Proceedings of the Piling 2020 Conference (pp. 497-502). ICE Publishing.

[23] Deng, T. H., Zhang, K. R., & Shen, Z. J. (2021). A systematic review of a digital twin city: A new pattern of urban governance toward smart cities. Journal of Management Science and Engineering, 6(2), 125-134.

[24] Deng, Z. Y., Liu, X. R., Zhou, X. H., de la Fuente, A., Han, Y. F., Xiong, F., & Peng, H. Y. (2022a). Field monitoring of mechanical parameters of deep-buried jacketed-pipes in rock: Guanjingkou water control project. Tunnelling and Underground Space Technology, 125, 104531.

[25] Deng, Z. Y., Liu, X. R., Zhou, X. H., Yang, Q. H., Chen, P., de la Fuente, A., Ren, L. X., Du, L. B., Han, Y. F., Xiong, F., & Yan, R. (2022b). Main engineering problems and countermeasures in ultra-longdistance rock pipe jacking project: Water pipeline case study in Chongqing. Tunnelling and Underground Space Technology, 123, 104420.

[26] Di Murro, V., Soga, K., Fern, E. J., Pelecanos, L., Li, Z. L., & Scibile, L. (2019). Distributed fibre optic strain sensing of CERN infrastructures in the molasse region. In Proceedings of 17th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE 2019). Reykjavik, Iceland.

[27] Dunnicliff, J. (1993). Geotechnical Instrumentation for Monitoring Field Performance. John Wiley & Sons.

[28] Engelsman, D., & Klein, I. (2023). Information-aided inertial navigation: a review. IEEE Transactions on Instrumentation and Measurement, 72, 1-18.

[29] Fellenius, B. H., & Tan, S. A. (2010). Combination of bidirectional-cell test and conventional head-down test. The Art of Foundation Engineering Practice, 240-259.

[30] Feng, X., Zhang, P., Chen, X. L., Zhang, Y. L., Ma, B. S., Liu, K. X., Xu, T. S., & Zeng, C. (2023). Field mechanical properties of large section concrete pipes during jacking in fractured moderately weathered siltstone. Tunnelling and Underground Space Technology, 131, 104218.

[31] Flynn, K. N., & McCabe, B. A. (2021). Instrumented concrete pile testspart 1:A review of instrumentation and procedures. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 175(1), 86-111.

[32] Fritz, P. (2007). Additives for slurry shields in highly permeable ground. Rock Mechanics and Rock Engineering, 40(1), 81-95.

[33] Fritz, P., Hermanns Stengele, R., & Heinz, A. (2002). Modified bentonite slurries for slurry shields in highly permeable soils. Geotechnical Aspects of Underground Construction in Soft Ground, 233-238.

[34] Glisic, B., Inaudi, D., & Nan, C. (2002). Pile monitoring with fiber optic sensors during axial compression, pullout, and flexure tests. Transportation Research Record, 1808(1), 11-20.

[35] Grieves, M. (2014). Digital twin: Manufacturing excellence through virtual factory replication. White Paper, 1-7.

[36] Groves, P. (2007). Principles of GNSS, Inertial, and Multisensor Integrated Navigation Systems. Artech.

[37] Hinton, J., Weidner, L., Walton, G., & Neutzling, D. (2023). The validation of a look-ahead geophysical system at the rondout westbranch bypass tunnel. Geotechnical and Geological Engineering, 41(2), 803-818.

[38] Hou, L., Wu, S. Z., Zhang, G. M., Tan, Y. T., & Wang, X. Y. (2021). Literature review of digital twins applications in construction workforce safety. Applied Sciences, 11(1), 339.

[39] Iglesia, G. R., Einstein, H. H., & Whitman, R. V. (2013). Investigation of soil arching with centrifuge tests. Journal of Geotechnical and Geoenvironmental Engineering, 140(2), 04013005.

[40] Ji, X. B., Ni, P. P., Barla, M., Zhao, W., & Mei, G. X. (2018). Earth pressure on shield excavation face for pipe jacking considering arching effect. Tunnelling and Underground Space Technology, 72, 17-27.

[41] Jiang, X., Zhang, X. H., Wang, S., Bai, Y., & Huang, B. S. (2022). Case study of the largest concrete earth pressure balance pipe-jacking project in the world. Transportation Research Record, 2676(7), 92-105.

[42] Kechavarzi, C., Pelecanos, L., Nicholas, D. B., & Soga, K. (2019). Distributed fibre optic sensing for monitoring reinforced concrete piles. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 50(2), 43-51.

[43] Khazaei, S., Shimada, H., Kawai, T., Yotsumoto, J., & Matsui, K. (2006). Monitoring of over cutting area and lubrication distribution in a large slurry pipe jacking operation. Geotechnical and Geological Engineering, 24(3), 735-755.

[44] Kister, G., Winter, D., Gebremichael, Y. M., Leighton, J., Badcock, R. A., Tester, P. D., Krishnamurthy, S., Boyle, W. J. O., Grattan, K. T. V., & Fernando, G. F. (2007). Methodology and integrity monitoring of foundation concrete piles using Bragg grating optical fibre sensors. Engineering Structures, 29(9), 2048-2055.

[45] Klar, A., Bennett, P. J., Soga, K., Mair, R. J., Tester, P., Fernie, R., St John, H. D., & Torp-Petersors, G. (2006). Distributed strain measurement for pile foundations. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 159(3), 135-144.

[46] Leng, S., Lin, J. R., Hu, Z. Z., & Shen, X. S. (2020). A Hybrid Data Mining Method for Tunnel Engineering Based on Real-Time Monitoring Data from Tunnel Boring Machines. IEEE Access, 8, 90430-90449.

[47] Li, C., Zhong, Z. L., Bie, C. Y., & Liu, X. R. (2018). Field performance of large section concrete pipes cracking during jacking in Chongqing - A case study. Tunnelling and Underground Space Technology, 82, 568-583.

[48] Linker, R., & Klar, A. (2017). Detection of Sinkhole Formation by Strain Profile Measurements Using BOTDR: Simulation Study. Journal of Engineering Mechanics, 143(3), B4015002.

[49] Liu, K. X., Xiao, A. F., Zhang, P., Zhou, H., Chen, Z. H., Xu, T. S., Ma, B. S., Ai, H., & Wang, Q. (2022). Study on mechanical response of steel pipe jacking considering the effect of pipe sticking. Tunnelling and Underground Space Technology, 127, 104617.

[50] Liu, X. Y., Wang, Y. H., & Zhang, M. Y. (2020). Application of miniature FBG-MEMS pressure sensor in penetration process of jacked pile. Micromachines, 11(9), 876.

[51] Lu, H. F., Matthews, J., & Iseley, T. (2020). How does trenchless technology make pipeline construction greener? A comprehensive carbon footprint and energy consumption analysis. Journal of Cleaner Production, 261, 121215.

[52] Marshall, M.A. (1998). Pipe-jacked tunnelling: jacking loads and ground movements. [Doctoral dissertation, University of Oxford, United Kingdom].

[53] McCabe, B. A., O'Dwyer, K.G., Sheil, B., & Burke, P. F. (2022). Pipejacking stoppages modelled using direct shear interface tests. In Proceedings of 10th International Conference on Physical Modelling in Geotechnics 2022 (ICPMG 2022). Daejeon, Korea.

[54] McCabe, B. A., O'Dwyer, K. G., & Sheil, B. B. (2025). Skin friction increases associated with pipe-jacking stoppages modelled using direct shear interface tests. Tunnelling and Underground Space Technology, 156, 106147.

[55] Min, F. L., Zhu, W., & Han, X. R. (2013). Filter cake formation for slurry shield tunneling in highly permeable sand. Tunnelling and Underground Space Technology, 38, 423-430.

[56] Namli, M., & Guler, E. (2017). Effect of Bentonite Slurry Pressure on Interface Friction of Pipe Jacking. Journal of Pipeline Systems Engineering and Practice, 8(2), 04016016.

[57] Norris, P. (1992). The behaviour of jacked concrete pipes during site installation. [Doctoral dissertation, University of Oxford, United Kingdom].

[58] O'Dwyer, K. G. ( 2023). Stoppages in pipe-jacking modelled using interface friction tests. [Doctoral dissertation, University of Galway, Ireland].

[59] O'Dwyer, K. G., McCabe, B. A., & Sheil, B. B. (2020). Interpretation of pipe-jacking and lubrication records for drives in silty soil. Underground Space, 5(3), 199-209.

[60] O'Dwyer, K. G., Wadood, A., McCabe, B. A., Sheil, B. B., & Phillips, B. M. (2024). Selected collective learnings from a pipe-jacking drive database. In Proceedings of Civil Engineering Research in Ireland (CERI 2024). University of Galway, Ireland.

[61] Peerun, M. I., Ong, D. E. L., & Desha, C. (2022). A strategic review on enhanced DEM simulation and advanced 3-D particle printing techniques to improve pipe-jacking force prediction. Tunnelling and Underground Space Technology, 123, 104415.

[62] Pelecanos, L., Soga, K., Elshafie, M. Z. E. B., De Battista, N., Kechavarzi, C., Gue, C. Y., Ouyang, Y., & Seo, H. J. (2017). Distributed Fiber Optic Sensing of Axially Loaded Bored Piles. Journal of Geotechnical and Geoenvironmental Engineering, 144(3), 04017122.

[63] Pellet-Beaucour, A. L., & Kastner, R. (2002). Experimental and analytical study of friction forces during microtunneling operations. Tunnelling and Underground Space Technology, 17(1), 83-97.

[64] Phillips, B. M. (2023). Soil-lubricant-structure interface mechanics for microtunnelling. [Doctoral dissertation, University of Oxford, United Kingdom].

[65] Phillips, B. M., Royston, R., Sheil, B. B., & Byrne, B. W. (2019). Instrumentation and monitoring of a concrete jacking pipe. In Proceedings of the International Conference on Smart Infrastructure and Construction 2019 (ICSIC 2019) (pp. 457-462).

[66] Praetorius, S., & Schösser, B. (2017). Bentonite handbook: lubrication for pipe jacking. John Wiley & Sons.

[67] Rahjoo, S., Najafi, M., Williammee, R., & Khankarli, G. (2012). Comparison of Jacking Load Models for Trenchless Pipe Jacking. In Proceedings of Pipelines 2012:Innovations in Design, Construction, Operations, and Maintenance, Doing More with Less (pp.1507-1520).

[68] Reilly, C. C. (2014). The Influence of Lubricant Slurries on Skin Friction Resistance in Pipe Jacking. [Doctoral dissertation, Trinity College Dublin, Ireland].

[69] Reilly, C. C., & Orr, T. L. L. (2017). Physical modelling of the effect of lubricants in pipe jacking. Tunnelling and Underground Space Technology, 63, 44-53.

[70] Royston, R., Sheil, B. B., & Byrne, B. W. (2022). Monitoring the construction of a large-diameter caisson in sand. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 175(3), 323-339.

[71] Schaeffer, K., & Mooney, M. A. (2016). Examining the influence of TBMground interaction on electrical resistivity imaging ahead of the TBM. Tunnelling and Underground Space Technology, 58, 82-98.

[72] Sheil, B. (2021). Prediction of microtunnelling jacking forces using a probabilistic observational approach. Tunnelling and Underground Space Technology, 109, 103749.

[73] Sheil, B. B., Suryasentana, S. K., Templeman, J. O., Phillips, B. M., Cheng, W. C., & Zhang, L. M. (2021). Prediction of Pipe-Jacking Forces Using a Bayesian Updating Approach. Journal of Geotechnical and Geoenvironmental Engineering, 148(1), 04021173.

[74] Shou, K., Yen, J., & Liu, M. (2010). On the frictional property of lubricants and its impact on jacking force and soil-pipe interaction of pipe-jacking. Tunnelling and Underground Space Technology, 25(4), 469-477.

[75] Sinnreich, J. (2021). Optimizing the arrangement of strain gauges in pile load testing. Geotechnical Testing Journal, 44(5), 1552-1558.

[76] Sladen, J. A., & Oswell, J. M. (1988). The induced trench method - A critical review and case history. Canadian Geotechnical Journal, 25(3), 541-549.

[77] Reilly, C.C., McCabe, B.A., & Orr, T.L.L. (2012). Analysis of microtunnel jacking forces in alluvium and glacial till in Mullingar, Ireland. In Proceedings of World Tunnelling Conference. Bangkok, Thailand.

[78] Soga, K., Kwan, V., Pelecanos, L., Rui, Y., Schwamb, T., Seo, H., & Wilcock, M. (2015). The role of distributed sensing in understanding the engineering performance of geotechnical structures. In Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering. Edinburgh, United Kingdom.

[79] Soga, K., & Schooling, J. (2016). Infrastructure sensing. Interface Focus, 6 (4), 20160023.

[80] Stein, D., Möllers, K., Bielecki, R., & Lenz, H. (1989). Microtunnelling: Installation and renewal of nonman-size supply and sewage lines by the trenchless construction method. Wiley & Sons.

[81] Sterling, R. L. (2020). Developments and research directions in pipe jacking and microtunneling. Underground Space, 5(1), 1-19.

[82] Stone, K. J. L., & Muir Wood, D. (1992). Effect of dilatancy and particle size observed in model tests on sand. Soils and Foundations, 32(4), 43-57.

[83] Sun, W., Shi, M. L., Zhang, C., Zhao, J. H., & Song, X. G. (2018). Dynamic load prediction of tunnel boring machine (TBM) based on heterogeneous in-situ data. Automation in Construction, 92, 23-34.

[84] Swallow, A. W., & Sheil, B. B. (2023). Embodied carbon analysis of microtunneling using recent case histories. Journal of Geotechnical and Geoenvironmental Engineering, 149(10), 04023087.

[85] Tang, B., Wang, Z. H., Cheng, H., Yeboah, M., Tang, Y. Z., Yao, Z. S., Wang, C. B., Rong, C. X., & Liu, Q. S. (2021). Experimental study on pipe strength and field performance of pipe jacking TBM in deepburied coal mines. International Journal of Civil Engineering, 19(11), 1327-1338.

[86] Templeman, J. O. (2023). Measurement and modelling of soil-structure interaction for open caisson shafts. [Doctoral dissertation, University of Oxford, United Kingdom].

[87] Templeman, J., & Sheil, B. (2024). Development of a new soil-structure contact stress sensor for underground construction applications. Géotechnique, in Press.

[88] Terzaghi, K. (1936). Stress distribution in dry and in saturated sand above a yielding trap-door. In Proceedings of 1st International Conference on Soil Mechanics and Foundation Engineering (pp.307-311).

[89] Terzaghi, K. (1943). Theoretical soil mechanics (1st Edition). New York: Wiley and Sons.

[90] Tsang, C. F., Disfani, M., Macklin, S., & Jiang, A. (2021). Monitoring the 3D distortion of glass-fibre reinforced plastic jacking pipes using fibre optic instrumentation. In Proceedings of 17th Australasian Tunnelling Conference (pp.785-796).

[91] United, Nations, UN. (2022). World Population Prospects 2022:Summary of Results. Technical Report. United Nations, Department of Economic and Social Affairs, Population Division.

[92] Wang, F., Huang, H. W., He, B., Wu, Y., Shao, H., Wu, H. M., Mair, R. J., Soga, K., Jin, Y., Parlikad, A. K., & Schooling, J. M. (2016). Wireless sensing on shield tunnels in Shanghai. In Transforming the Future of Infrastructure through Smarter Information: Proceedings of the International Conference on Smart Infrastructure and Construction (pp. 191-196). ICE Publishing.

[93] Zhang, H. F., Zhang, P., Zhou, W., Dong, S., & Ma, B. S. (2016). A new model to predict soil pressure acting on deep burial jacked pipes. Tunnelling and Underground Space Technology, 60, 183-196.

[94] Zhang, P., Behbahani, S. S., Ma, B. S., Iseley, T., & Tan, L. X. (2018). A jacking force study of curved steel pipe roof in Gongbei tunnel: Calculation review and monitoring data analysis. Tunnelling and Underground Space Technology, 72, 305-322.

[95] Zhang, P., Feng, X., Zeng, C., & Ariaratnam, S. T. (2022). Field performance of steel pipes during curve jacking in Gongbei tunnel. Tunnelling and Underground Space Technology, 128, 104585.

[96] Zhao, S. Y., Zhou, Z., Zhang, C. X., Wu, J., Liu, F., & Shi, G. Y. (2023). Localization of underground pipe jacking machinery: A reliable, realtime and robust INS/OD solution. Control Engineering Practice, 141, 105711.