Three-dimensional hydro-mechanical coupling numerical simulation of shield-driven cross-river twin tunnels: A case study

Abstract

With the rapid development of urban underground space, the construction of shield-driven cross-river twin tunnels is increasing, and the complex hydro-mechanical coupling effects and twin-tunnel interactions bring huge construction risks to such projects, which have attracted more and more attention. This study aims to understand the excavation effects induced by shield driving of cross-river twin tunnels through numerical simulation. A refined three-dimensional numerical model based on the fully coupled hydro-mechanical theory is established. The model considers the main components of the slurry pressure balance shield (SPBS) machine, including support force, jacking thrust, grouting pressure, shield-rock interaction and lining-grouting interaction, as well as the detailed construction process. The purpose is to examine the excavation effects during construction, including rock deformation around tunnels, the change in pore pressure, and the response of the lining. The results show the influence range of twin-tunnel excavation on rock deformation and pore pressure, as well as the modes of lining response. In addition, this study also systematically investigates the effects of water level fluctuation and burial depth on twin-tunnel excavation. The results indicate that the increase of water level or burial depth will enhance the excavation effects and strengthen the twin-tunnel interactions. These results provide useful insights for estimating the construction impact range and degree of twin tunnels, and serve as basic references for the design of cross-river twin tunnels.

Keywords

Numerical modeling / Twin tunnels / Crossing river / Hydro-mechanical coupling / Lining response

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgments

This work was supported by the National Natural Science Foundation of China (Grant Nos. 52090081 and 52079068), and the State Key Laboratory of Hydroscience and Hydraulic Engineering (Grant No. 2021-KY-04).

References

[1] Abu-Farsakh, M. Y., & Voyiadjis, G. Z. (1999). Computational model for the simulation of the shield tunneling process in cohesive soils. International Journal for Numerical and Analytical Methods in Geomechanics, 23(1), 23-44.

[2] Beghoul, M., & Demagh, R. (2019). Slurry shield tunneling in soft ground. Comparison between field data and 3D numerical simulation. Studia Geotechnica et Mechanica, 41(3). Article 3.

[3] Cai, Q. P., Peng, J. M., Ng, C. W. W., Shi, J. W., & Chen, X. X. (2019). Centrifuge and numerical modelling of tunnel intersected by normal fault rupture in sand. Computers and Geotechnics, 111, 137-146.

[4] Chen, R. P., Zhu, J., Liu, W., & Tang, X. W. (2011). Ground movement induced by parallel EPB tunnels in silty soils. Tunnelling and Underground Space Technology, 26(1), 163-171.

[5] Chen, R.-P., Lin, X.-T., Kang, X., Zhong, Z.-Q., Liu, Y., Zhang, P., & Wu, H.-N. (2018). Deformation and stress characteristics of existing twin tunnels induced by close-distance EPBS under-crossing. Tunnelling and Underground Space Technology, 82, 468-481.

[6] Cheng, X. S., Zhang, S. L., Qi, L., & Zhou, X. H. (2022). Fluidsolid coupling response of shield tunnel lining structure under high water pressure. Marine Georesources & Geotechnology, 40(10). Article 10.

[7] Cheng, X. S., Zhang, S. L., Zhou, X. H., & Xia, P. Y. (2022). Parameter analysis of excavation face stability of shield tunnel under high water pressure seepage. Physics and Chemistry of the Earth, Parts A/B/C, 128, 103218.

[8] Dias, D., Janin, J.-P., Soubra, & A.-H., Kastner, R. (2008). Threedimensional face stability analysis of circular tunnels by numerical simulations. In GeoCongress 2008: Characterization, Monitoring, and Modeling of GeoSystems (pp.886-893).

[9] Dias, D., & Kastner, R. (2013). Movements caused by the excavation of tunnels using face pressurized shields—Analysis of monitoring and numerical modeling results. Engineering Geology, 152(1), 17-25.

[10] Do, N.-A., Dias, D., Oreste, P., & Djeran-Maigre, I. (2014a). Threedimensional numerical simulation of a mechanized twin tunnels in soft ground. Tunnelling and Underground Space Technology, 42, 40-51.

[11] Do, N.-A., Dias, D., Oreste, P., & Djeran-Maigre, I. (2014b). Threedimensional numerical simulation for mechanized tunnelling in soft ground: The influence of the joint pattern. Acta Geotechnica, 9(4), 673-694.

[12] Elnahhas, F., Elkadi, F., & Shalaby, A. (1991). Field-Measurements During Construction of a Compressed-Air Tunnel in Cairo. T. Tunnelling and Underground Space Technology, 6(1), 123-127.

[13] Epel, T., Mooney, M. A., & Gutierrez, M. (2021). The influence of face and shield annulus pressure on tunnel liner load development. Tunnelling and Underground Space Technology, 117, 104096.

[14] Graziani, A., & Boldini, D. (2012). Remarks on axisymmetric modeling of deep tunnels in argillaceous formations. I: Plastic clays. Tunnelling and Underground Space Technology, 28, 70-79.

[15] He, J. Z., Liao, S. M., Liu, M. B., Sun, J. C., & Xi, X. G. (2023). The soil arching effect induced by shield tunnelling under asymmetric surface loading. Computers and Geotechnics, 154, 105145.

[16] Hoek, E., & Brown, E. T. (1997). Practical estimates of rock mass strength. International Journal of Rock Mechanics and Mining Sciences, 34(8), 1165-1186.

[17] Hoek, E., Wood, D., & Shah, S. (1992). A modified Hoek-Brown failure criterion for jointed rock masses. Thomas Telford.

[18] Huang, X. J., Zhang, J. X., Yang, L., Yang, S. K., & Wang, X. L. (2016). Elasto-plastic analysis of the surrounding rock mass in circular tunnel based on the generalized nonlinear unified strength theory. International Journal of Mining Science and Technology, 26(5), 819-823.

[19] Kasper, T., & Meschke, G. (2006). A numerical study of the effect of soil and grout material properties and cover depth in shield tunnelling. Computers and Geotechnics, 33(4-5), 234-247.

[20] Lai, H. P., Zheng, H. W., Chen, R., Kang, Z., & Liu, Y. (2020). Settlement behaviors of existing tunnel caused by obliquely under-crossing shield tunneling in close proximity with small intersection angle. Tunnelling and Underground Space Technology, 97, 103258.

[21] Li, C. D., Zhang, W., Wang, X. M., Pan, B., Zhu, H. H., & Spencer, B. F. (2020). Modeling dynamic responses of a cross-river road shield tunnel under stochastic vehicle loads. Tunnelling and Underground Space Technology, 102, 103432.

[22] Li, H. Z., Guo, T., Nan, Y. L., & Han, B. (2021). A simplified threedimensional extension of Hoek-Brown strength criterion. Journal of Rock Mechanics and Geotechnical Engineering, 13(3), 568-578.

[23] Li, L. P., Sun, S. Q., Wang, J., Yang, W. M., Song, S. G., & Fang, Z. D. (2020). Experimental study of the precursor information of the water inrush in shield tunnels due to the proximity of a water-filled cave. International Journal of Rock Mechanics and Mining Sciences, 130, 104320.

[24] Li, X., Zhou, S. H., Di, H. G., & Wang, P. X. (2018). Evaluation and experimental study on the sealant behaviour of double gaskets for shield tunnel lining. Tunnelling and Underground Space Technology, 75, 81-89.

[25] Li, Y., Emeriault, F., Kastner, R., & Zhang, Z. X. (2009). Stability analysis of large slurry shield-driven tunnel in soft clay. Tunnelling and Underground Space Technology, 24(4), 472-481.

[26] Li, Z., Luo, Z. J., Xu, C. H., & Tan, J. Z. (2019). 3D fluid-solid full coupling numerical simulation of soil deformation induced by shield tunnelling. Tunnelling and Underground Space Technology, 90, 174-182.

[27] Liang, Y., Zhang, J., Lai, Z. S., Huang, Q. Y., & Huang, L. C. (2020). Temporal and spatial distribution of the grout pressure and its effects on lining segments during synchronous grouting in shield tunnelling. European Journal of Environmental and Civil Engineering, 24(1), 79-96.

[28] Lin, C. G., Zhang, Z. M., Wu, S. M., & Yu, F. (2013). Key techniques and important issues for slurry shield under-passing embankments: A case study of Hangzhou Qiantang River Tunnel. Tunnelling and Underground Space Technology, 38, 306-325.

[29] Lin, X.-T., Chen, R.-P., Wu, H.-N., & Cheng, H.-Z. (2019). Threedimensional stress-transfer mechanism and soil arching evolution induced by shield tunneling in sandy ground. Tunnelling and Underground Space Technology, 93, 103104.

[30] Liu, D. J., Tian, C., Wang, F., Hu, Q. F., & Zuo, J. P. (2021). Longitudinal structural deformation mechanism of shield tunnel linings considering shearing dislocation of circumferential joints. Computers and Geotechnics, 139, 104384.

[31] Liu, J. W., Shi, C. H., Wang, Z. X., Lei, M. F., Zhao, D., & Cao, C. Y. (2021). Damage mechanism modelling of shield tunnel with longitudinal differential deformation based on elastoplastic damage model. Tunnelling and Underground Space Technology, 113, 103952.

[32] Liu, Y. B., Liao, S. M., Chen, L. S., & Liu, M. B. (2022). Structural responses of DOT tunnel induced by shield under-crossing in close proximity in soft ground. Part I: Field measurement. Tunnelling and Underground Space Technology, 128, 104623.

[33] Lv, J. B., Li, X. L., Li, Z. R., & Fu, H. L. (2020). Numerical simulations of construction of shield tunnel with small clearance to adjacent tunnel without and with isolation pile reinforcement. KSCE Journal of Civil Engineering, 24, 295-309.

[34] Mašín, D., & Rott, J. (2014). Small strain stiffness anisotropy of natural sedimentary clays: Review and a model. Acta Geotechnica, 9(2), 299-312.

[35] Medina Rodríguez, L. (2000). Estudio de los movimientos originados por la excavación de túneles con escudos de presión de tierras en los suelos tosquizos de Madrid. University of La Coruna, A Coruña.

[36] Mohamad, H., Soga, K., Bennett, P. J., Mair, R. J., & Lim, C. S. (2012). Monitoring Twin Tunnel Interaction Using Distributed Optical Fiber Strain Measurements. Journal of Geotechnical and Geoenvironmental Engineering, 138(8), 957-967.

[37] Mollon, G., Dias, D., & Soubra, A.-H. (2013). Probabilistic analyses of tunneling-induced ground movements. Acta Geotechnica, 8, 181-199.

[38] Nagel, F., Stascheit, J., & Meschke, G. (2010). Process-oriented numerical simulation of shield-supported tunnelling in soft soils. Geomechanics and Tunnelling, 3(3), 268-282.

[39] Nematollahi, M., & Dias, D. (2019). Three-dimensional numerical simulation of pile-twin tunnels interaction - Case of the Shiraz subway line. Tunnelling and Underground Space Technology, 86, 75-88.

[40] Neupane, B., Panthi, K. K., & Vereide, K. (2020). Effect of Power Plant Operation on Pore Pressure in Jointed Rock Mass of an Unlined Hydropower Tunnel: An Experimental Study. Rock Mechanics and Rock Engineering, 53(7), 3073-3092.

[41] Shi, J. K., Wang, F., Zhang, D. M., & Huang, H. W. (2021). Refined 3D modelling of spatial-temporal distribution of excess pore water pressure induced by large diameter slurry shield tunneling. Computers and Geotechnics, 137, 104312.

[42] Skels, P., & Bondars, K. (2017). Applicability of Small Strain Stiffness Parameters for Pile Settlement Calculation. Procedia Engineering, 172, 999-1006.

[43] Song, X., Wu, H.-N., Meng, F.-Y., Chen, R.-P., & Cheng, H.-Z. (2023). Soil arching evolution caused by shield tunneling in deep saturated ground. Transportation Geotechnics, 40, 100966.

[44] Swoboda, G., & Abu-Krisha, A. (1999). Three-dimensional numerical modelling for TBM tunnelling in consolidated clay. Tunnelling and Underground Space Technology, 14(3), 327-333.

[45] Tu, H. L., Qiao, C. S., & Han, Z. M. (2018). Elastic-brittle-plastic analysis of the radial subgrade modulus for a circular cavity based on the generalized nonlinear unified strength criterion. Tunnelling and Underground Space Technology, 71, 623-636.

[46] Tran, N.-H., Do, D.-P., & Hoxha, D. (2018). A closed-form hydromechanical solution for deep tunnels in elastic anisotropic rock. European Journal of Environmental and Civil Engineering, 22(12), 1429-1445.

[47] Wan, M. S. P., Standing, J. R., Potts, D. M., & Burland, J. B. (2019). Pore water pressure and total horizontal stress response to EPBM tunnelling in London Clay. Géotechnique, 69(5), 434-457.

[48] Wang, C. W., Liu, X. L., Song, D. Q., Wang, E. Z., & Zhang, J. M. (2021). Numerical investigation on dynamic response and failure modes of rock slopes with weak interlayers using continuumdiscontinuum element method. Frontiers in Earth Science, 9, 791458.

[49] Wang, C. W., Liu, X. L., Song, D. Q., Wang, E. Z., & Zhang, J. M. (2023). Elasto-plastic analysis of the surrounding rock mass in circular tunnel using a new numerical model based on generalized nonlinear unified strength theory. Computers and Geotechnics, 154, 105163.

[50] Wang, L., & Zheng, G. (2022). Numerical evaluation of the upheave and soil arching associated with compaction grouting in shield tunneling and loading process. Tunnelling and Underground Space Technology, 128, 104664.

[51] Wu, H.-N., Shen, S.-L., Chen, R.-P., & Zhou, A. (2020). Threedimensional numerical modelling on localised leakage in segmental lining of shield tunnels. Computers and Geotechnics, 122, 103549.

[52] Xu, D. L., Zhang, X. H., Chen, W., Jiang, X., Liu, Z., & Bai, Y. (2019). Utilisation of the deep underground space in Shanghai. Proceedings of the Institution of Civil Engineers-Municipal Engineer, 172(4), 218-223.

[53] Xue, Y. G., Li, X., Qiu, D. H., Ma, X. M., Kong, F. M., Qu, C. Q., & Zhao, Y. (2019). Stability evaluation for the excavation face of shield tunnel across the Yangtze River by multi-factor analysis. Geomechanics and Engineering, 19(3), 283-293.

[54] Zan, Y.W., Yu, M.H., & Wang, S.J. (2002). Nonlinear unified strength criterion of rock. Chinese Journal of Rock Mechanics and Engineering., 21, 1435-1441.(in Chinese)

[55] Zareifard, M. R. (2018). An analytical solution for design of pressure tunnels considering seepage loads. Applied Mathematical Modelling, 62, 62-85.

[56] Zhang, X.-H., Wang, X.-W., & Xu, Y.-S. (2022). Groundwater environment and related potential engineering disasters of deep underground space in Shanghai. Bulletin of Engineering Geology and the Environment, 81, 203.

[57] Zhang, Z. H., Xu, W. S., Nie, W. T., & Deng, L. M. (2021). DEM and theoretical analyses of the face stability of shallow shield cross-river tunnels in silty fine sand. Computers and Geotechnics, 130, 103905.

[58] Zhang, Z. X., Hu, X. Y., & Scott, K. D. (2011). A discrete numerical approach for modeling face stability in slurry shield tunnelling in soft soils. Computers and Geotechnics, 38(1), 94-104.

[59] Zhao, D. P., Wang, L. W., Zhang, B. H., Wen, S. W., Li, D. L., Wang, D. Y., & Fang, H. C. (2022). Study on launch tunnelling parameters of a shield tunnel buried in pebble soil with existing pipelines base on discrete continuous coupling numerical method. Tunnelling and Underground Space Technology, 129, 104629.

[60] Zheng, G., Yang, X. Y., Zhou, H. Z., Du, Y. M., Sun, J. S., & Yu, X. X. (2018). A simplified prediction method for evaluating tunnel displacement induced by laterally adjacent excavations. Computers and Geotechnics, 95, 119-128.

[61] Zhou, H., Gao, Y., Zhang, C. Q., Yang, F. J., Hu, M. M., Liu, H. T., & Jiang, Y. (2018). A 3D model of coupled hydro-mechanical simulation of double shield TBM excavation. Tunnelling and Underground Space Technology, 71, 1-14.

[62] Zou, J. F., Chen, G. H., & Qian, Z. H. (2019). Tunnel face stability in cohesion-frictional soils considering the soil arching effect by improved failure models. Computers and Geotechnics, 106, 1-17.