Tracking of horizontal alignment of the long and large diameter uncharged hole in NATM tunnel

Abstract

The long and large diameter uncharged hole boring (LLB) method is a cut blasting method that minimizes blast-induced vibrations by creating long and large diameter uncharged holes at the excavation face of tunnels prior to tunnel excavation. Drilling in this method typically uses a 50 m long with a 382 mm diameter hammer bit in the horizontal direction at the tunnel face. However, the significant weight and uni-directional rotation of the rod head, as well as variables such as geological characteristics, machine conditions, and inexperienced operators result in significant deviation from the target borehole alignment that hinders the vibration-dampening effect of the uncharged holes. Furthermore, since there is no method to verify the alignment of the boreholes until main tunnel construction, borehole misalignment is often not discovered until weeks after construction, which requires tunnel construction to cease until the equipment can be remobilized and an additional borehole be created, causing significant delays and increased costs for the entire tunnel project. In this study, the borehole alignment tracking and ground exploration system (BGS) is developed to predict and monitor the quality and alignment of boreholes for cut blasting methods such as the LLB methods immediately after boring. The BGS was subsequently tested at a subway construction site to evaluate its performance in the field. The measurements yielded by the BGS were compared with manually measured boring positions at every 5 m along the borehole. Although the BGS showed a maximum deviation of approximately 12% at a local point where the hole surface was relatively rough, the accuracy for the final boring position was approximately 97%, demonstrating excellent precision of the alignment tracking system. The BGS demonstrates excellent performance in predicting ground conditions and the boring quality of a cut hole immediately after drilling, and shows promise in various other applications for monitoring borehole alignment.

Keywords

Tunnel blasting / LLB method / Drilling deviation / Vertical sagging / Horizontal alignment tracking / BGS

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgment

This work was supported by the Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure, and Transport, South Korea (Grant No. 22UUTI-C157786-03).

References

[1] Adebayo, B., & Akande, J. M. (2015). Effect of blast-hole deviation on drilling and muck-pile loading cost. International Journal of Scientific Research and Innovative Technology, 2(6), 64-73.

[2] Aygar, E. B. (2020). Evaluation of new Austrian tunnelling method applied to Bolu tunnel’s weak rocks. Journal of Rock Mechanics and Geotechnical Engineering, 12(3), 541-556.

[3] Blake, E. W., & Clarke, G. K. C. (1992). Interpretation of boreholeinclinometer data: A general theory applied to a new instrument. Journal of Glaciology, 38(128), 113-124.

[4] Bhagade, N. V., Murthy, V. M. S. R., & Budi, G. (2021). Measurement and control of seismic effects in large scale dragline bench blasts - An approach. Measurement, 168(15), 1-14.

[5] Choi, Y. H., Kim, M. S., & Lee, S. S. (2022). Prediction of vertical alignment of the MSP borehole using artificial neural network. KSCE Journal of Civil Engineering, 26(10), 4330-4337.

[6] Cloutier, J. (2009). Experimental feasibility of the in-drilling alignment method for INS-based measurement-while-drilling. [Ph.D thesis, University of Calgary].

[7] Gu, W. B., Wang, Z. X., Liu, J. Q., Xu, J. L., Liu, X., & Cao, T. (2017). Water-depth-based prediction formula for the blasting vibration velocity of lighthouse caused by underwater drilling blasting. Shock and Vibration, 2, 1-10.

[8] Hong, Z. X., Tao, M., Cui, X. J., Wu, C. Q., & Zhao, M. S. (2022). Experimental and numerical studies of the blast-induced overbreak and underbreak in underground roadways. Underground Space, 8(2), 61-79.

[9] Ji, H. F., & Liu, S. Y. (2021). Position deviation control of drilling machine using a nonlinear adaptive backstepping controller based on a disturbance observer. Processes, 9(2), 237-253.

[10] Kangwa, S. (2001). Economic consequences of hole deviations in mining operations. [Master’s Thesis, University of Zambia]. Lusaka, Zambia.

[11] Kim, M. S., Lee, J. K., Choi, Y. H., Kim, S. H., Jeong, K. W., Kim, K. L., & Lee, S. S. (2020). A study on the optimal setting of large uncharged hole boring machine for reducing blast-induced vibration using deep learning. Explosive and Blasting, 38(4), 16-25 (in Korean).

[12] Kim, M. S., & Lee, S. S. (2021a). The efficiency of large hole boring (MSP) method in the reduction of blast-induced vibration. Applied. Sciences, 11(4), 1814-1829.

[13] Kim, M. S., Jung, J. H., Lee, J. K., Park, M. S., Bak, J. H., & Lee, S. S. (2021b). Development and application of large-diameter cut-hole exploration system for assessment of the geological condition beyond NATM tunnel face. Tunnel and Underground Space, 31(1), 1-9 (in Korean).

[14] Kim, M. S., & Lee, S. S. (2022). Investigation of geological conditions beyond the excavation face using a MSP boring data monitoring system. International Journal of Rock Mechanics and Mining Sciences, 157(10), 105161-105171.

[15] Kondratenko, A., Timonin, V., & Patutin, A. (2016). Prospects for directional drilling in hard rocks. Journal of Mining Science, 52(1), 129-134.

[16] Laguillo, M., Segarra, P., Sanchidrian, J. A., & Beitia, F. (2022). A novel borehole surveying system for underground mining: Design and performance assessment. Measurement, 194(1), 111021-111031.

[17] Navarro, J., Segarra, P., Sanchidrian, J. A., Castedo, R., & Lopez, L. M. (2019). Assessment of drilling deviations in underground operations. Tunnelling and Underground Space Technology, 83, 254-261.

[18] Oslen, V. (2009). Rock quarrying: Prediction models and blasting safety. [Doctoral dissertation, Norwegian University of Science and Technology]. Trondheim, Norwegian.

[19] Singh, P. K., Roy, M. P., Paswan, R. K., Sarim, M., Kumar, S., & Jha, R. R. (2016). Rock fragmentation control in opencast blasting. Journal of Rock Mechanics and Geotechnical Engineering, 8(2), 225-237.

[20] Wang, X. H., & Song, H. (2012). The inertial technology based 3- dimensional information measurement system for underground pipeline. Measurement, 45(3), 604-614.

[21] Xie, L. X., Lu, W. B., Gu, J. C., & Wang, G. H. (2018). Excavation method of reducing blasting vibration in complicated geological conditions. Shock and Vibration, 1, 1-12.