Synchronized Measurement of Electromechanical Responses of Fabric Strain Sensors Under Large Deformation

Abstract

Fabric-based strain sensors hold significant potential across various applications, including sports, healthcare, rehabilitation, etc. Nonetheless, their complex performance under large deformation and varying loading rates, arising from material viscoelasticity and textile structure intricacies, remains inadequately understood. The primary constraint in evaluating their performance lies in the absence of electromechanically coupled instrumentation. This paper endeavors to overcome the limitation by developing a synchronized measurement system, which integrates mechanically controlled loading, voltage divider circuits, and visual measurement technologies. This system enables synchronized acquisition of mechanical and electrical signals spanning from 0.01 mm/min to 6 m/s, by employing material testing machines for low-speed loading and split Hopkinson pressure bars for medium-to-high-speed loading, and combining electrical performance measurements with displacement and strain field analyses. Experiments revealed that sensor sensitivity increased linearly with the logarithm of loading rates, while deformation patterns evolved with loading speed, thereby offering valuable insights into design and calibration of fabric-based strain sensors under dynamic conditions.

Keywords

synchronized measurement / fabric strain sensor / electromechanical behavior / dynamic loading / large deformation

References

[1] Sun, F., Jiang, H., Wang, H., Zhong, Y., Xu, Y., Xing, Y., :::, & Zhu, M. (2023). Soft fiber electronics based on semiconducting polymer. Chemical Reviews, 123(8), 4693-4763. https://doi.org/10.1021/acs.chemrev.2c00720

[2] Niknejad, N., Ismail, W. B., Mardani, A., Liao, H., & Ghani, I. (2020). A comprehensive overview of smart wearables: The state of the art literature, recent advances, and future challenges. Engineering Applications of Artificial Intelligence, 90, 103529. https://doi.org/10.1016/j.engappai.2020.103529

[3] Wang, J., Lu, C., & Zhang, K. (2020). Textile—based strain sensor for human motion detection. Energy & Environmental Materials, 3(1), 80-100. https://doi.org/10.1002/eem2.12041

[4] Seyedin, S., Zhang, P., Naebe, M., Qin, S., Chen, J., Wang, X., & Razal, J. M. (2019). Textile strain sensors: A review of the fabrication technologies, performance evaluation and applications. Materials Horizons, 6(2), 219-249. https://doi.org/10.1039/C8MH01062E

[5] Wang, X., Yu, H., Kold, S., Rahbek, O., & Bai, S. (2023). Wearable sensors for activity monitoring and motion control: A review. Biomimetic Intelligence and Robotics, 3(1), 100089. https://doi.org/10.1016/j.birob.2023.100089

[6] He, X., Cai, J., Liu, M., Ni, X., Liu, W., Guo, H., :::, & Qin, X. (2024). Multifunctional, wearable, and wireless sensing system via thermoelectric fabrics. Engineering, 35, 158-167. https://doi.org/10.1016/j.eng.2023.05.026

[7] Zhang, J., Xu, B., Chen, K., Li, Y., Li, G., & Liu, Z. (2024). Revolutionizing digital healthcare networks with wearable strain sensors using sustainable fibers. SusMat, 4(4), e207. https://doi.org/10.1002/sus2.207

[8] Lu, D., Chu, Y., Liao, S., Li, W., Cai, Y., Wei, Q., & Wang, Q. (2022). Highly sensitive fabric strain sensor with double—layer conductive networks for joint rehabilitation therapy. Composites Science and Technology, 230, 109778. https://doi.org/10.1016/j.compscitech.2022.109778

[9] Rodgers, M. M., Alon, G., Pai, V. M., & Conroy, R. S. (2019). Wearable technologies for active living and rehabilitation: Current research challenges and future opportunities. Journal of Rehabilitation and Assistive Technologies Engineering, 6, 2055668319839607. https://doi.org/10.1177/2055668319839607

[10] Xiong, J., Chen, J., & Lee, P. S. (2021). Functional fibers and fabrics for soft robotics, wearables, and human—robot interface. Advanced Materials, 33(19), 2002640. https://doi.org/10.1002/adma.202002640

[11] Yin, R., Wang, D., Zhao, S., Lou, Z., & Shen, G. (2021). Wearable sensors—enabled human—machine interaction systems: From design to application. Advanced Functional Materials, 31(11), 2008936. https://doi.org/10.1002/adfm.202008936

[12] Zhong, W., Ming, X., Li, W., Jia, K., Jiang, H., Ke, Y., :::, & Wang, D. (2022). Wearable human—machine interaction device integrated by all—textile—based tactile sensors array via facile cross—stitch. Sensors and Actuators A: Physical, 333, 113240. https://doi.org/10.1016/j.sna.2021.113240

[13] Gao, B., Jiang, J., Zhou, S., Li, J., Zhou, Q., & Li, X. (2024). Toward the next generation human—machine interaction: Headworn wearable devices. Analytical Chemistry, 96(26), 10477-10487. https://doi.org/10.1021/acs.analchem.4c01190

[14] Jourdan, A., Rapacchi, S., Guye, M., Bendahan, D., Masson, C., & Bège, T. (2022). Dynamic—MRI quantification of abdominal wall motion and deformation during breathing and muscular contraction. Computer Methods and Programs in Biomedicine, 217, 106667. https://doi.org/10.1016/j.cmpb.2022.106667

[15] Buddhadev, H. H., & Martin, P. E. (2016). Effects of age and physical activity status on redistribution of joint work during walking. Gait & Posture, 50, 131-136. https://doi.org/10.1016/j.gaitpost.2016.08.034

[16] Law, N.—Y., & Li, J. X. (2022). Biomechanics analysis of seven Tai Chi movements. Sports Medicine and Health Science, 4(4), 245-252. https://doi.org/10.1016/j.smhs.2022.06.002

[17] Beránek, V., Votápek, P., & Stastny, P. (2023). Force and velocity of impact during upper limb strikes in combat sports: A systematic review and meta—analysis. Sports Biomechanics, 22(8), 921-939. https://doi.org/10.1080/14763141.2020.1778075

[18] Cao, Y., Liu, Y., Tang, L., Jiang, Z., Liu, Z., Zhou, L., & Yang, B. (2024). Quantitative assessment of brain injury and concussion induced by an unintentional soccer ball impact. Injury, 55(8), 111658. https://doi.org/10.1016/j.injury.2024.111658

[19] Wang, H., Hazell, P. J., Shankar, K., Morozov, E. V., Jovanoski, Z., Brown, A. D., :::, & Escobedo—Diaz, J. P. (2020). Tensile properties of ultra—high—molecular—weight polyethylene single yarns at different strain rates. Journal of Composite Materials, 54(11), 1453-1466. https://doi.org/10.1177/0021998319883416

[20] Wang, F., Zhu, B., Shu, L., Li, Y., Lai, X., Ma, L., :::, & Tao, X. (2023). Smart clothing with built—in soft sensing network for measuring temporal and spatial distribution of pressure under impact scenarios. Advanced Sensor Research, 2(2), 2200019. https://doi.org/10.1002/adsr.202200019

[21] Zhang, F., Hu, H., Hu, S., & Yue, J. (2021). Significant strain—rate dependence of sensing behavior in TiO₂@carbon fibre/PDMS composites for flexible strain sensors . Journal of Advanced Ceramics, 10(6), 1350-1359. https://doi.org/10.1007/s40145-021-0509-7

[22] Brown, K. A., Brooks, R., & Warrior, N. A. (2010). The static and high strain rate behaviour of a commingled E—glass/polypropylene woven fabric composite. Composites Science and Technology, 70(2), 272-283. https://doi.org/10.1016/j.compscitech.2009.10.018

[23] Todo, M., Takahashi, K., Béguelin, P., & Kausch, H. H. (2000). Strain—rate dependence of the tensile fracture behaviour of woven—cloth reinforced polyamide composites. Composites Science and Technology, 60(5), 763-771. https://doi.org/10.1016/S0266-3538(99)00184-0

[24] Luo, Y., Abidian, M. R., Ahn, J.—H., Akinwande, D., Andrews, A. M., Antonietti, M., :::, & Chen, X. (2023). Technology roadmap for flexible sensors. ACS Nano, 17(6), 5211-5295. https://doi.org/10.1021/acsnano.2c12606

[25] Ates, H. C., Nguyen, P. Q., Gonzalez—Macia, L., Morales—Narváez, E., Güder, F., Collins, J. J., & Dincer, C. (2022). End—to—end design of wearable sensors. Nature Reviews Materials, 7(11), 887-907. https://doi.org/10.1038/s41578-022-00460-x

[26] Wang, X., Yang, B., Li, Q., Wang, F., & Tao, X. (2021). Modeling the stress and resistance relaxation of conductive composites—coated fabric strain sensors. Composites Science and Technology, 204, 108645. https://doi.org/10.1016/j.compscitech.2021.108645

[27] Chen, X., Wang, F., Shu, L., Tao, X., Wei, L., Xu, X., :::, & Huang, G. (2022). A single—material—printed, low—cost design for a carbon—based fabric strain sensor. Materials & Design, 221, 110926. https://doi.org/10.1016/j.matdes.2022.110926

[28] Li, Q., Wang, Y., Jiang, S., Li, T., Ding, X., Tao, X., & Wang, X. (2020). Investigation into tensile hysteresis of polyurethane—containing textile substrates for coated strain sensors. Materials & Design, 188, 108451. https://doi.org/10.1016/j.matdes.2019.108451

[29] Yamaguchi, K., Busfield, J. J. C., & Thomas, A. G. (2003). Electrical and mechanical behavior of filled elastomers. I. The effect of strain. Journal of Polymer Science Part B: Polymer Physics, 41(17), 2079-2089. https://doi.org/10.1002/polb.10571

[30] Wang, J. P., Xue, P., & Tao, X. M. (2011). Strain sensing behavior of electrically conductive fibers under large deformation. Materials Science and Engineering: A, 528(6), 2863-2869. https://doi.org/10.1016/j.msea.2010.12.057