Improved thermoelectric performance in n-type flexible Bi₂Se_3+x/PVDF composite films

Abstract

Bismuth selenide materials (Bi₂Se₃) have high performance around room temperature, demonstrating potential in thermoelectric applications. Presently, most vacuum preparation techniques used to fabricate the film materials, such as magnetron sputtering and molecular beam epitaxy, usually require complex and expensive equipment. This limits the practical applications of flexible thermoelectric films. Here, we prepared Bi₂Se_3+x nanoplate/polyvinylidene fluoride composite films with good flexibility using a facile chemical reaction method. Their thermoelectric performance and microstructures were systematically studied. The composite films exhibit a highly preferred orientation along (015). The carrier concentration and mobility were optimized by adding excessive element Se, eventually leading to an improvement in thermoelectric performance. The optimized power factor is 5.2 μW/K²m at 300 K. Furthermore, the performance remains stable after 2500 bending cycles at a radius of 1 cm, suggesting promising applications in wearable/portable electronics.

Keywords

Bi₂Se₃ / flexible / thermoelectric films / heterostructure

References

[1] Yang J,Deng Z.Ionic liquid-activated wearable electronics..Materials Today Physics2019;8:78-85

[2] Gao M,Song Y.Inkjet printing wearable electronic devices..J Mater Chem C2017;5:2971-93

[3] Nozariasbmarz A,Dsouza K.Review of wearable thermoelectric energy harvesting: from body temperature to electronic systems..Applied Energy2020;258:114069

[4] Zhang Y.Flexible organic thermoelectric materials and devices for wearable green energy harvesting..Polymers (Basel)2019;11:909 PMCID:PMC6571912

[5] Wang Y,Shi XL.Flexible thermoelectric materials and generators: challenges and innovations..Adv Mater2019;31:e1807916

[6] Jung YS,Kang SB.Wearable solar thermoelectric generator driven by unprecedentedly high temperature difference..Nano Energy2017;40:663-72

[7] Chang C.Anharmoncity and low thermal conductivity in thermoelectrics..Materials Today Physics2018;4:50-7

[8] Kang SD,Aydemir U.Enhanced stability and thermoelectric figure-of-merit in copper selenide by lithium doping..Materials Today Physics2017;1:7-13

[9] Zhai R,Zhu T.Thermoelectric performance of p-type zone-melted Se-doped Bi_0.5Sb_1.5Te₃ alloys..Rare Met2018;37:308-15

[10] Guan M,Song Q.Improved electrical transport properties and optimized thermoelectric figure of merit in lithium-doped copper sulfides..Rare Met2018;37:282-9

[11] He R,Sun J.Improved thermoelectric performance of n-type half-Heusler MCo1-xNixSb (M = Hf, Zr)..Materials Today Physics2017;1:24-30

[12] Ding Y,Cai K.High performance n-type Ag₂Se film on nylon membrane for flexible thermoelectric power generator..Nat Commun2019;10:841 PMCID:PMC6381183

[13] Liu R,Liu Y.BiCuSeO as state-of-the-art thermoelectric materials for energy conversion: from thin films to bulks..Rare Met2018;37:259-73

[14] Wu Y,Faghaninia A.Promising thermoelectric performance in van der Waals layered SnSe₂..Materials Today Physics2017;3:127-36

[15] Ma S,Wei P.High-pressure synthesis and excellent thermoelectric performance of Ni/BiTeSe magnetic nanocomposites..J Mater Chem A2020;8:4816-26

[16] Cecchi S,Kriegner D.Interplay between structural and thermoelectric properties in epitaxial Sb_2+xTe₃ alloys..Adv Funct Mater2019;29:1805184

[17] Chen Y,Zhang Z.Two-dimensional metal nanomaterials: synthesis, properties, and applications..Chem Rev2018;118:6409-55

[18] Atwa M,Yonamine A.Top-down approach using supercritical carbon dioxide ball milling for producing sub-10 nm Bi₂Te₃ grains..Appl Phys Express2020;13:067002

[19] Ambrosi A,Luxa J.Exfoliation of layered topological insulators Bi₂Se₃ and Bi₂Te₃ via electrochemistry..ACS Nano2016;10:11442-8

[20] Zhao M,Peng Y,Ma Q.Two-dimensional metal-organic framework nanosheets: synthesis and applications..Chem Soc Rev2018;47:6267-95

[21] Gui R,Sun Y,Sun Z.Two-dimensional group-VA nanomaterials beyond black phosphorus: synthetic methods, properties, functional nanostructures and applications..J Mater Chem A2019;7:25712-71

[22] Liu J,Li X.High performance visible photodetectors based on thin two-dimensional Bi₂Te₃ nanoplates..J Alloys Compd2019;798:656-64

[23] Shang H,Li G.High performance co-sputtered Bi₂Te₃ thin films with preferred orientation induced by MgO substrates..J Alloys Compd2017;726:532-7

[24] Shang H,Deng Y.Bi_0.5Sb_1.5Te₃-based films for flexible thermoelectric devices..J Mater Chem A2020;8:4552-61

[25] Yoo T,Dong S.Thermal conductivity of Bi₂ (Se_xTe_1-x)₃ alloy films grown by molecular beam epitaxy..APL Materials2017;5:066101

[26] Wudil Y,Rao S.Thermal conductivity of PLD-grown thermoelectric Bi₂Te_2.7Se_0.3 films using temperature-dependent Raman spectroscopy technique..Ceramics International2020;46:7253-8

[27] Liu W,Kim HS.Current progress and future challenges in thermoelectric power generation: from materials to devices..Acta Materialia2015;87:357-76

[28] Masood KB,Singh J.Evolution of the structural, dielectric and electrical transport properties of Bi₂Te₃ nano-sticks synthesized via polyol and solvothermal routes..Physica B Condensed Matter2020;588:412183

[29] Dun C,Huang H.Layered Bi₂Se₃ nanoplate/polyvinylidene fluoride composite based n-type thermoelectric fabrics..ACS Appl Mater Interfaces2015;7:7054-9

[30] Chen X,Yu P.Flexible thermoelectric films based on Bi₂Te₃ nanosheets and carbon nanotube network with high n-type performance..ACS Appl Mater Interfaces2021;13:5451-9

[31] Li S,Liu F.Effective atomic interface engineering in Bi₂Te_2.7Se_0.3 thermoelectric material by atomic-layer-deposition approach..Nano Energy2018;49:257-66

[32] Kong D,Lai K.Rapid surface oxidation as a source of surface degradation factor for Bi₂Se₃..ACS Nano2011;5:4698-703

[33] Zhang L,Yu J.Controlled synthesis and photocatalytic activity of ZnSe nanostructured assemblies with different morphologies and crystalline phases..J Phys Chem C2009;113:5434-43

[34] Zhou B.Microwave-assisted synthesis of Sb2Se3 submicron rods, compared with those of Bi₂Te₃ and Sb₂Te₃..Nanotechnology2009;20:085604

[35] Liu S,Bai Y,Ma F.Fabrication of Cu-Doped Bi₂Te₃ nanoplates and their thermoelectric properties..Journal of Elec Materi2017;46:2697-704

[36] Cam Tuyen LT,Luo CW.Thermoelectric properties of nanocrystalline Bi₃Se₂Te thin films grown using pulsed laser deposition..J Alloys Compd2016;673:107-14