From bibliometric analysis: 3D printing design strategies and battery applications with a focus on zinc-ion batteries

Abstract

Three-dimensional (3D) printing has the potential to revolutionize the way energy storage devices are designed and manufactured. In this paper, we explore the use of 3D printing in the design and production of energy storage devices, especially zinc-ion batteries (ZIBs) and examine its potential advantages over traditional manufacturing methods. 3D printing could significantly improve the customization of ZIBs, making it a promising strategy for the future of energy storage. In particular, 3D printing allows for the creation of complex, customized geometries, and designs that can optimize the energy density, power density, and overall performance of batteries. Simultaneously, we discuss and compare the impact of 3D printing design strategies based on different configurations of film, interdigitation, and framework on energy storage devices with a focus on ZIBs. Additionally, 3D printing enables the rapid prototyping and production of batteries, reducing leading times and costs compared with traditional manufacturing methods. However, there are also challenges and limitations to consider, such as the need for further development of suitable 3D printing materials and processes for energy storage applications.

Keywords

3D printing / battery commercialization / bibliometric analysis / electrode configurations / zinc-ion battery

References

[1] Sun X, Gao J, Wang C, et al. A hybrid ZnO/Si/porous-carbon anode for high performance lithium ion battery. Chem Eng J. 2020;383:123198.

[2] Dai Y, Liao X, Yu R, et al. Quicker and more Zn²⁺ storage predominantly from the interface. Adv Mater. 2021;33(26):2100359.

[3] Zhu J, Xia L, Yu R, et al. Ultrahigh stable methanol oxidation enabled by a high hydroxyl concentration on Pt clusters/MXene interfaces. J Am Chem Soc. 2022;144(34):15529-15538.

[4] Zhang W, Li H, Zhang Z, Xu M, Lai Y, Chou SL. Full activation of Mn⁴⁺/Mn³⁺ redox in Na₄MnCr (PO₄)₃ as a high-voltage and high-rate cathode material for sodium-ion batteries. Small. 2020;16(25):2001524.

[5] Chen S, Zhang Z, Jiang W, et al. Engineering water molecules activation center on multisite electrocatalysts for enhanced CO₂ methanation. J Am Chem Soc. 2022;144(28):12807-12815.

[6] Zhuang Z, Xia L, Huang J, et al. Continuous modulation of electrocatalytic oxygen reduction activities of single-atom catalysts through p-n junction rectification. Angew Chem. 2023;135(5):e202212335.

[7] Zhang Z, Zhu J, Chen S, Sun W, Wang D. Liquid fluxional Ga single atom catalysts for efficient electrochemical CO₂ reduction. Angew Chem. 2023;135(3):e202215136.

[8] Zong W, Rao D, Guo H, et al. Gradient phosphorus-doping engineering and superficial amorphous reconstruction in NiFe₂O₄ nanoarrays to enhance the oxygen evolution electrocatalysis. Nanoscale. 2020;12(20):10977-10986.

[9] Hopkins BJ, Sassin MB, Chervin CN, et al. Fabricating architected zinc electrodes with unprecedented volumetric capacity in rechargeable alkaline cells. Energy Storage Mater. 2020;27:370-376.

[10] Dong H, Li J, Guo J, et al. Insights on flexible zinc-ion batteries from lab research to commercialization. Adv Mater. 2021;33(20):2007548.

[11] Zong W, Yang C, Mo L, et al. Elucidating dual-defect mechanism in rhenium disulfide nanosheets with multi-dimensional ion transport channels for ultrafast sodium storage. Nano Energy. 2020;77:105189.

[12] Zhang W, Dai Y, Chen R, et al. Highly reversible zinc metal anode in a dilute aqueous electrolyte enabled by a pH buffer additive. Angew Chem Int Ed. 2023;62(5):e202212695.

[13] Gao X, Sun X, Liu J, Gao N, Li H. A carbon-based anode combining with SiO and nanodiamond for high performance lithium ion battery. J Energy Storage. 2019;25:100901.

[14] Chen R, Li X, Huang Q, Ling H, Yang Y, Wang X. Self-assembled porous biomass carbon/RGO/nanocellulose hybrid aerogels for self-supporting supercapacitor electrodes. Chem Eng J. 2021;412:128755.

[15] Chen R, Tang H, Dai Y, et al. Robust bioinspired MXene–hemicellulose composite films with excellent electrical conductivity for multifunctional electrode applications. ACS Nano. 2022;16(11):19124-19132.

[16] Yu K, Zhang H, Qi H, Gao X, Liang J, Liang C. Rice husk as the source of silicon/carbon anode material and stable electrochemical performance. ChemistrySelect. 2018;3(19):5439-5444.

[17] Zhu C, Schorr NB, Qi Z, et al. Direct ink writing of 3D Zn structures as high-capacity anodes for rechargeable alkaline batteries. Small Struct. 2022:2200323.

[18] Zhang W, Wu Y, Xu Z, et al. Rationally designed sodium chromium vanadium phosphate cathodes with multi-electron reaction for fast-charging sodium-ion batteries. Adv Energy Mater. 2022;12(25):2201065.

[19] Zhang W, Xu Z, Li H, et al. All-climate and air-stable NASICON-Na₂TiV(PO₄)₃ cathode with three-electron reaction toward high-performance sodium-ion batteries. Chem Eng J. 2022;433:133542.

[20] Ouyang Y, Zong W, Zhu X, et al. A universal spinning-coordinating strategy to construct continuous metal-nitrogen-carbon heterointerface with boosted lithium polysulfides immobilization for 3D-printed Li-S batteries. Adv Sci. 2022;9(26):2203181.

[21] Gao X, Sun X, Jiang Z, et al. Introducing nanodiamond into TiO₂-based anode for improving the performance of lithium-ion batteries. New J Chem. 2019;43(9):3907-3912.

[22] Zhu J, Tang C, Zhuang Z, et al. Porous and low-crystalline manganese silicate hollow spheres wired by graphene oxide for high-performance lithium and sodium storage. ACS Appl Mater Interfaces. 2017;9(29):24584-24590.

[23] Dong H, Li J, Zhao S, et al. Investigation of a biomass hydrogel electrolyte naturally stabilizing cathodes for zinc-ion batteries. ACS Appl Mater Interfaces. 2021;13(1):745-754.

[24] Dong H, Li J, Zhao S, et al. An anti-aging polymer electrolyte for flexible rechargeable zinc-ion batteries. J Mater Chem A. 2020;8(43):22637-22644.

[25] Liu Y, Lu X, Lai F, et al. Rechargeable aqueous Zn-based energy storage devices. Joule. 2021;5(11):2845-2903.

[26] Liu Y, He G, Jiang H, Parkin IP, Shearing PR, Brett DJL. Cathode design for aqueous rechargeable multivalent ion batteries: challenges and opportunities. Adv Funct Mater. 2021;31(13):2010445.

[27] Zhang Q, Ma C, Song N-J, Zhao Y, Li Y. A facile ball milling-catalytic pyrolysis preparation of Si-Nss@C/Ng composite for lithium storage. Ng Composite for Lithium Storage.

[28] Chao D, Zhou W, Ye C, et al. An electrolytic Zn–MnO₂ battery for high-voltage and scalable energy storage. Angew Chem. 2019;131(23):7905-7910.

[29] Alfaruqi MH, Mathew V, Song J, et al. Electrochemical zinc intercalation in lithium vanadium oxide: a high-capacity zinc-ion battery cathode. Chem Mater. 2017;29(4):1684-1694.

[30] Dai Y, Li J, Chen L, et al. Generating H⁺ in catholyte and OH^– in anolyte: an approach to improve the stability of aqueous zinc-ion batteries. ACS Energy Lett. 2021;6(2):684-686.

[31] Zhu S, Dai Y, Li J, et al. Cathodic Zn underpotential deposition: an evitable degradation mechanism in aqueous zinc-ion batteries. Sci Bull. 2022;67(18):1882-1889.

[32] He H, Tong H, Song X, Song X, Liu J. Highly stable Zn metal anodes enabled by atomic layer deposited Al₂O₃ coating for aqueous zinc-ion batteries. J Mater Chem A. 2020;8(16):7836-7846.

[33] Ruan P, Liang S, Lu B, Fan HJ, Zhou J. Design strategies for high-energy-density aqueous zinc batteries. Angew Chem Int Ed. 2022;61(17):e202200598.

[34] Zhang W, He G. Solid-electrolyte interphase chemistries towards high-performance aqueous zinc metal batteries. Angew Chem Int Ed. 2023:e202218466.

[35] Yang Q, Liu Q, Ling W, et al. Porous electrode materials for Zn-ion batteries: from fabrication and electrochemical application. Batteries. 2022;8(11):223.

[36] Gao X, Zhang C, Dai Y, et al. Three-dimensional manganese oxide@ carbon networks as free-standing, high-loading cathodes for high-performance zinc-ion batteries. Small Struct. 2023;4(5):2200316.

[37] Yan W, Cai X, Tan F, Liang J, Zhao J, Tan C. 3D printing flexible zinc-ion microbatteries with ultrahigh areal capacity and energy density for wearable electronics. Chem Commun. 2023;59:1661-1664.

[38] Liu P, Liu W, Liu K. Rational modulation of emerging MXene materials for zinc-ion storage. Carbon Energy. 2022;4(1):60-76.

[39] Gao W, Michalička J, Pumera M. Hierarchical atomic layer deposited V₂O₅ on 3D printed nanocarbon electrodes for high-performance aqueous zinc-ion batteries. Small. 2022;18(1):2105572.

[40] Zeng L, He H, Chen H, Luo D, He J, Zhang C. 3D printing architecting reservoir-integrated anode for dendrite-free, safe, and durable Zn batteries. Adv Energy Mater. 2022;12(12):2103708.

[41] Liu Y, Zheng S, Ma J, et al. All 3D printing shape-conformable zinc ion hybrid capacitors with ultrahigh areal capacitance and improved cycle life. Adv Energy Mater. 2022;12(27):2200341.

[42] Gan H, Wu J, Zhang F, Li R, Liu H. Uniform Zn²⁺ distribution and deposition regulated by ultrathin hydroxyl-rich silica ion sieve in zinc metal anodes. Energy Storage Mater. 2023;55:264-271.

[43] He H, Luo D, Zeng L, et al. 3D printing of fast kinetics reconciled ultra-thick cathodes for high areal energy density aqueous Li–Zn hybrid battery. Sci Bull. 2022;67(12):1253-1263.

[44] Dong H, Liu R, Hu X, et al. Cathode–electrolyte interface modification by binder engineering for high-performance aqueous zinc-ion batteries. Adv Sci. 2022;10(4):2205084.

[45] Wang Y, Li L, Wang Y, Shi H, Wang L, Huang Q. Electrooxidation of perfluorooctanesulfonic acid on porous Magnéli phase titanium suboxide anodes: impact of porous structure and composition. Chem Eng J. 2022;431:133929.

[46] Zong W, Ouyang Y, Miao Y-E, Liu T, Lai F. Recent advances and perspectives of 3D printed micro-supercapacitors: from design to smart integrated devices. Chem Commun. 2022;58(13):2075-2095.

[47] Wang L, Feng J, Jiang Y, et al. Ultraviolet-assisted direct-write printing strategy towards polyorganosiloxane-based aerogels with freeform geometry and outstanding thermal insulation performance. Chem Eng J. 2022;455:140818.

[48] Lu B, Li D, Tian X. Development trends in additive manufacturing and 3D printing. Engineering. 2015;1(1):85-89.

[49] Egorov V, Gulzar U, Zhang Y, Breen S, O'Dwyer C. Evolution of 3D printing methods and materials for electrochemical energy storage. Adv Mater. 2020;32(29):2000556.

[50] Lai F, Yang C, Lian R, et al. Three-phase boundary in cross-coupled micro-mesoporous networks enabling 3D-printed and ionogel-based quasi-solid-state micro-supercapacitors. Adv Mater. 2020;32(40):2002474.

[51] Al Ahbabi KJA, Alrashdi MMS, Ahmed WK. The capabilities of 3D printing technology in the production of battery energy storage system. 6th International Conference on Renewable Energy: Generation and Applications (ICREGA), 2021:211-216.

[52] Wang Z, Winslow R, Madan D, et al. Development of MnO₂ cathode inks for flexographically printed rechargeable zinc-based battery. J Power Sources. 2014;268:246-254.

[53] Hung J-L, Zhang K. Examining mobile learning trends 2003–2008: a categorical meta-trend analysis using text mining techniques. J Comput High Educ. 2012;24(1):1-17.

[54] Donthu N, Kumar S, Mukherjee D, Pandey N, Lim WM. How to conduct a bibliometric analysis: an overview and guidelines. J Bus Res. 2021;133:285-296.

[55] Zyoud SH, Al-Jabi SW, Sweileh WM, Awang R. A bibliometric analysis of toxicology research productivity in Middle Eastern Arab countries during a 10-year period (2003–2012). Health Res Policy Syst. 2014;12(1):1-13.

[56] Li CZ, Hong J, Xue F, Shen GQ, Xu X, Mok MK. Schedule risks in prefabrication housing production in Hong Kong: a social network analysis. J Clean Prod. 2016;134:482-494.

[57] Ye Q, Song H, Li T. Cross-institutional collaboration networks in tourism and hospitality research. Tour Manag Perspect. 2012;2-3:55-64.

[58] Diamond HJ, Karl TR, Palecki MA, et al. US climate reference network after one decade of operations: status and assessment. Bull Am Meteorol Soc. 2013;94(4):485-498.

[59] Chu T, Park S, Fu K. 3D printing-enabled advanced electrode architecture design. Carbon Energy. 2021;3(3):424-439.

[60] Jha S, Velhal M, Stewart W, Amin V, Wang E, Liang H. Additively manufactured electrodes for supercapacitors: a review. Appl Mater Today. 2021;26:101220.

[61] Chen R, Chen Y, Xu L, et al. 3D-printed interdigital electrodes for electrochemical energy storage devices. J Mater Res. 2021;36(22):4489-4507.

[62] Cheng M, Jiang Y. 3D-printed solid-state electrolytes for electrochemical energy storage devices. J Mater Res. 2021;36:4547-4564.

[63] Tian X, Xu B. 3D printing for solid-state energy storage. Small Methods. 2021;5(12):2100877.

[64] Zhu Y, Qin J, Shi G, et al. A focus review on 3D printing of wearable energy storage devices. Carbon Energy. 2022;4(6):1242-1261.

[65] Kumar S, Kumar S, Goswami M, et al. 3D printing for energy storage devices and applications. In: Muralidhara HB, Banerjee S, eds. 3D Printing Technology and Its Diverse Applications. CRC Press; 2021:117-140.

[66] Xiao J, Ji G, Zhang Y, et al. Large-scale 3D printing concrete technology: current status and future opportunities. Cem Concr Compos. 2021;122:104115.

[67] Goh GL, Zhang H, Chong TH, Yeong WY. 3D printing of multilayered and multimaterial electronics: a review. Adv Electron Mater. 2021;7(10):2100445.

[68] Elbadawi M, McCoubrey LE, Gavins FKH, et al. Disrupting 3D printing of medicines with machine learning. Trends Pharmacol Sci. 2021;42(9):745-757.

[69] Wang X, Zhang M, Zhang L, Xu J, Xiao X, Zhang X. Inkjet-printed flexible sensors: from function materials, manufacture process, and applications perspective. Mater Today Commun. 2022;31:103263.

[70] Tan HW, Choong YYC, Kuo CN, Low HY, Chua CK. 3D printed electronics: processes, materials and future trends. Prog Mater Sci. 2022;127:100945.

[71] Lanaro M, Desselle MR, Woodruff MA. 3D printing chocolate: properties of formulations for extrusion, sintering, binding and ink jetting. In: Godoi FC, Bhandari BR, Prakash S, Zhang M, eds. Fundamentals of 3D Food Printing and Applications. Elsevier; 2019:151-173.

[72] Le Néel TA, Mognol P, Hascoët J-Y. A review on additive manufacturing of sand molds by binder jetting and selective laser sintering. Rapid Prototyp J. 2018;24(8):1325-1336.

[73] Li M, Du W, Elwany A, Pei Z, Ma C. Metal binder jetting additive manufacturing: a literature review. J Manuf Sci Eng. 2020;142(9):090801.

[74] Lewis JA. Direct ink writing of 3D functional materials. Adv Funct Mater. 2006;16(17):2193-2204.

[75] Shahzad A, Lazoglu I. Direct ink writing (DIW) of structural and functional ceramics: recent achievements and future challenges. Compos B Eng. 2021;225:109249.

[76] Awasthi P, Banerjee SS. Fused deposition modeling of thermoplastic elastomeric materials: challenges and opportunities. Addit Manuf. 2021;46:102177.

[77] Deckard CR. Selective Laser Sintering. The University of Texas at Austin; 1988.

[78] Gibson I, Rosen D, Stucker B. Directed energy deposition processes. In: Stampfl J, Hatzenbichler M, eds. Additive Manufacturing Technologies. Springer; 2015:245-268.

[79] Melchels FPW, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials. 2010;31(24):6121-6130.

[80] Rubio CD, Weber W, Klotzsch E. Maasi: a 3D printed spin coater with touchscreen. HardwareX. 2022;11:e00316.

[81] Chi Q-Z, Mu L-Z, He Y, Luan Y, Jing Y-C. A brush–spin–coating method for fabricating in vitro patient-specific vascular models by coupling 3D-printing. Cardiovasc Eng Technol. 2021;12:200-214.

[82] Sun K, Wei TS, Ahn BY, Seo JY, Dillon SJ, Lewis JA. 3D printing of interdigitated Li-ion microbattery architectures. Adv Mater. 2013;25(33):4539-4543.

[83] Zong W, Guo H, Ouyang Y, et al. Topochemistry-driven synthesis of transition-metal selenides with weakened van der Waals force to enable 3D-printed Na-ion hybrid capacitors. Adv Funct Mater. 2022;32(13):2110016.

[84] Zong W, Chui N, Tian Z, et al. Ultrafine MoP nanoparticle splotched nitrogen-doped carbon nanosheets enabling high-performance 3D-printed potassium-ion hybrid capacitors. Adv Sci. 2021;8(7):2004142.

[85] Chen J, Ding Y, Yan D, Huang J, Peng S. Synthesis of MXene and its application for zinc-ion storage. SusMat. 2022;2(3):293-318.

[86] Zhang X, Wang L, Fu H. Recent advances in rechargeable Zn-based batteries. J Power Sources. 2021;493:229677.

[87] Ponnada S, Gorle DB, Bose RSC, et al. Current insight into 3D printing in solid-state lithium-ion batteries: a perspective. Batteries Supercaps. 2022;5(8):e202200223.

[88] Zhu K, Wu T, Sun S, Wen Y, Huang K. Electrode materials for practical rechargeable aqueous Zn-ion batteries: challenges and opportunities. ChemElectroChem. 2020;7(13):2714-2734.

[89] Bi J, Zhang J, Giannakou P, et al. A highly integrated flexible photo-rechargeable system based on stable ultrahigh-rate quasi-solid-state zinc-ion micro-batteries and perovskite solar cells. Energy Storage Mater. 2022;51:239-248.

[90] Lin D, Li Y. Recent advances of aqueous rechargeable zinc-iodine batteries: challenges, solutions, and prospects. Adv Mater. 2022;34(23):2108856.

[91] Tang H, Yao J, Zhu Y. Recent developments and future prospects for zinc-ion hybrid capacitors: a review. Adv Energy Mater. 2021;11(14):2003994.

[92] Fan Z, Jin J, Li C, et al. 3D-printed Zn-ion hybrid capacitor enabled by universal divalent cation-gelated additive-free Ti₃C₂ MXene ink. ACS Nano. 2021;15(2):3098-3107.

[93] Bogue R. 3D printing: the dawn of a new era in manufacturing? Assembly Automation. 2013;33(4):307-311.

[94] Praveena B, Lokesh N, Buradi A, Santhosh N, Praveena B, Vignesh R. A comprehensive review of emerging additive manufacturing (3D printing technology): methods, materials, applications, challenges, trends and future potential. Mater Today Proc. 2022;52:1309-1313.

[95] Bozkurt Y, Karayel E. 3D printing technology; methods, biomedical applications, future opportunities and trends. J Mater Res Technol. 2021;14:1430-1450.

[96] Mo F, Guo B, Ling W, et al. Recent progress and challenges of flexible Zn-based batteries with polymer electrolyte. Batteries. 2022;8(6):59.

[97] Campos AR, Vila MN, Haddad M, et al. Facile electrodeposition and aging to generate 3-dimensional α-MnO₂ battery cathodes. J Electrochem Soc. 2022;169(10):100516.

[98] Yao B, Chandrasekaran S, Zhang J, et al. Efficient 3D printed pseudocapacitive electrodes with ultrahigh MnO₂ loading. Joule. 2019;3(2):459-470.

[99] Hertzberg BJ, Huang A, Hsieh A, et al. Effect of multiple cation electrolyte mixtures on rechargeable Zn–MnO₂ alkaline battery. Chem Mater. 2016;28(13):4536-4545.

[100] Huang J, Xie X, Liu K, Liang S, Fang G. Perspectives in electrochemically in-situ structural reconstruction of cathode materials for multivalent-ion storage. Energy Environ Mater. 2023;6(1):e12309.

[101] Costa CM, Gonçalves R, Lanceros-Méndez S. Recent advances and future challenges in printed batteries. Energy Storage Mater. 2020;28:216-234.

[102] Percin K, Rommerskirchen A, Sengpiel R, Gendel Y, Wessling M. 3D-printed conductive static mixers enable all-vanadium redox flow battery using slurry electrodes. J Power Sources. 2018;379:228-233.

[103] Ambrosi A, Webster RD. 3D printing for aqueous and non-aqueous redox flow batteries. Curr Opin Electrochem. 2020;20:28-35.

[104] Li Q, Dong Q, Wang J, et al. Direct ink writing (DIW) of graphene aerogel composite electrode for vanadium redox flow battery. J Power Sources. 2022;542:231810.

[105] Katic V, Dos Santos PL, Dos Santos MF, et al. 3D printed graphene electrodes modified with prussian blue: emerging electrochemical sensing platform for peroxide detection. ACS Appl Mater Interfaces. 2019;11(38):35068-35078.

[106] Bishop GW, Satterwhite JE, Bhakta S, et al. 3D-printed fluidic devices for nanoparticle preparation and flow-injection amperometry using integrated Prussian blue nanoparticle-modified electrodes. Anal Chem. 2015;87(10):5437-5443.

[107] Zambiazi P, de Moraes A, Kogachi R, Aparecido G, Formiga A, Bonacin J. Performance of water oxidation by 3D printed electrodes modified by Prussian blue analogues. J Braz Chem Soc. 2020;31(11):2307-2318.

[108] Zhang N, Chen X, Yu M, Niu Z, Cheng F, Chen J. Materials chemistry for rechargeable zinc-ion batteries. Chem Soc Rev. 2020;49(13):4203-4219.

[109] Agiorgousis ML, Sun Y-Y, West D, Zhang S. Intercalated Chevrel phase Mo₆S₈ as a Janus material for energy generation and storage. ACS Appl Energy Mater. 2018;1(2):440-446.

[110] Sharma S, Adalati R, Sharma M, et al. Single-step fabrication of di-titanium nitride thin-film flexible and biocompatible supercapacitor. Ceram Int. 2022;48(23):34678-34687.

[111] Thong PT, Sadhasivam T, Kim N-I, Kim YA, Roh S-H, Jung H-Y. Highly conductive current collector for enhancing conductivity and power supply of flexible thin-film Zn–MnO₂ battery. Energy. 2021;221:119856.

[112] Zhou J, Xie M, Wu F, et al. Ultrathin surface coating of nitrogen-doped graphene enables stable zinc anodes for aqueous zinc-ion batteries. Adv Mater. 2021;33(33):2101649.

[113] Feng J, Fang D, Yang Z, et al. A novel P₂/O₃ composite cathode toward synergistic electrochemical optimization for sodium ion batteries. J Power Sources. 2023;553:232292.

[114] Yadav P, Kumari N, Rai AK. A review on solutions to overcome the structural transformation of manganese dioxide-based cathodes for aqueous rechargeable zinc ion batteries. J Power Sources. 2023;555:232385.

[115] Wang X, Zheng S, Zhou F, et al. Scalable fabrication of printed Zn//MnO₂ planar micro-batteries with high volumetric energy density and exceptional safety. Natl Sci Rev. 2020;7(1):64-72.

[116] Fegade U, Jethave G, Khan F, et al. Recent development of aqueous zinc-ion battery cathodes and future challenges. Int J Energy Res. 2022;46(10):13152-13177.

[117] Yang J, Yin B, Sun Y, et al. Zinc anode for mild aqueous zinc-ion batteries: challenges, strategies, and perspectives. Nano Micro Lett. 2022;14(1):42.

[118] Mohajerani S, Wang G. “Touch-aware” contact model for peridynamics modeling of granular systems. Int J Numer Meth Eng. 2022;123(17):3850-3878.

[119] Ayoola OM, Buldum A, Farhad S, Ojo SA. A review on the molecular modeling of argyrodite electrolytes for all-solid-state lithium batteries. Energies. 2022;15(19):7288.

[120] Li M, Zhou S, Cheng L, et al. 3D printed supercapacitor: techniques, materials, designs, and applications. Adv Funct Mater. 2022;33(1):2208034.

[121] Zhang S, Liu Y, Hao J, Wallace GG, Beirne S, Chen J. 3D-printed wearable electrochemical energy devices. Adv Funct Mater. 2022;32(3):2103092.

[122] Lyu Z, Lim GJH, Koh JJ, et al. Design and manufacture of 3D-printed batteries. Joule. 2021;5(1):89-114.

[123] Guo B, Liang G, Yu S, Wang Y, Zhi C, Bai J. 3D printing of reduced graphene oxide aerogels for energy storage devices: a paradigm from materials and technologies to applications. Energy Storage Mater. 2021;39:146-165.

[124] Ren Y, Meng F, Zhang S, et al. CNT@ MnO₂ composite ink toward a flexible 3D printed micro-zinc-ion battery. Carbon Energy. 2022;4(3):446-457.

[125] Parker JF, Chervin CN, Pala IR, et al. Rechargeable nickel–3D zinc batteries: an energy-dense, safer alternative to lithium-ion. Science. 2017;356(6336):415-418.

[126] Zhang G, Zhang X, Liu H, Li J, Chen Y, Duan H. 3D-printed multi-channel metal lattices enabling localized electric-field redistribution for dendrite-free aqueous Zn ion batteries. Adv Energy Mater. 2021;11(19):2003927.

RIGHTS & PERMISSIONS

2023 2023 The Authors. SmartMat published by Tianjin University and John Wiley & Sons Australia, Ltd.