A Summary of the Application of High-strength Steel in Bridge Engineering

Abstract

Regarding the application of high-strength steel in bridges, this paper describes the development and changes in the properties of high-strength steel through a review of the relevant literature from the past five years. This paper introduces the research status of high-strength steel, steel strands and high-strength rebars and focuses on the research status and application level of HRB500 and HRB600 high-strength rebars, combined with their performance characteristics and application cases, and prospects for corresponding development and application in the future.

Keywords

high-strength steel / high-strength steel bar / high-strength weathering steel

References

[[1]] Editorial Department of China Journal of Highway and Transport. Review on China's Bridge Engineering Research: 2021 China Journal of Highway and Transport 2021, 34, 1-97, doi:10.3969/j.issn.1001-7372.2021.02.002.

[[2]] Wang C.; Duan L. Design Guidelines for High-Performance Steel Bridges. World Bridges 2007, 60-67, doi:10.3969/j.issn.1671-7767.2007.01.018.

[[3]] Wang C.; Duan L.; Yuan Z. Research, Development and Application of High Performance Steel in Japan and Europe. World Bridges 2008, 68-72.

[[4]] Guo T.; Wei M.; Liu L. Development of New Type Atmospheric Corrosion Resisting Steel A709M- HPS485W for Bridge. Steel Construction 2009, 24, 17-20, doi:10.3969/j.issn.1007-9963.2009.05.004.

[[5]] Rasmussen K.J.R.; Hancock G.J. Plate slenderness limits for high strength steel sections. J Constr Steel Res 1992, 23, 73-96, doi: 10.1016/0143-974X(92)90037-F.

[[6]] Beg D.; Hladnik L. Slenderness limit of Class 3 I cross-sections made of high strength steel. J Constr Steel Res 1996, 38, 201-217, doi: 10.1016/0143-974X(96)00025-9.

[[7]] Ban H.; Shi G.; Shi Y.; Wang Y. Study on the Residual Stress Distribution of Ultra-High-Strength-Steel Welded Sections. Engineering Mechanics 2008, 25, 57-61+98.

[[8]] Zhang Y.; Gou M.; Li N.; Liang C. Research on Stability of the Axial Compressed Member of High Strength Steel. Journal of North China Institute of Water Conservancy and Hydroelectric Power 2010, 31, 21-24, doi:10.3969/j.issn.1002-5634.2010.05.006

[[9]] Rasmussen K.J.R.; Hancock G.J. Tests of high strength steel columns. J Constr Steel Res 1995, 34, 27-52, doi: 10.1016/0143-974X(95)97296-A.

[[10]] Shi G.; Wang Y.; Shi Y. Behavior of High Strength Steel Columns Under Axial Compression. Journal of Building Structures 2009, 30, 92-97, doi:10.3321/j.issn:1000-6869.2009.02.012

[[11]] Cui W. Recent Research Advances and Application of High Strength Steel Structures. Building Structure 2011, 41, 958-963.

[[12]] Shi G.; Zhang J. Fatigue Test of High Strength Steel Q460D. Industrial Construction 2014, 44, 6-10, doi:10.13204/j.gyjz201403002.

[[13]] Cheng F.; Hu C.; Wang J.; Guo N.; Wu H.; Li Z.; Zhang D. Experimental Research on Fatigue Behavior of Q420 High Strength Steel. Steel Construction 2017, 32, 12-15+20.

[[14]] Barton S.C.; Vermaas G.W.; Duby P.F.; West A.C.; Betti R. Accelerated Corrosion and Embrittlement of High-Strength Bridge Wire. Journal of Materials in Civil Engineering 2000, 12, 33-38, doi:doi:10.1061/(ASCE)0899-1561(2000)12:1(33).

[[15]] Nakamura S.I.; Suzumura K.; Tarui T. Mechanical Properties and Remaining Strength of Corroded Bridge Wires. Structural Engineering International 2004, 14, 50-54.

[[16]] Li X.; Xie X.; Pan Q.; Sun W.; Zhu H. Experimental Study on Fatigue Performance of Corroded High Tensile Steel Wires of Arch Bridge Hangers. China Civil Engineering Journal 2015, 48, 68-76, doi:10.15951/j.tmgcxb.2015.11.010.

[[17]] Qiao Y.; Li A.; Liao C.; Sun C. Research on the Degradation of Mechanical Properties of Corroded Sling Wires. Journal of China & Foreign Highway 2016, 36, 134-138, doi:10.14048/j.issn.1671-2579.2016.03.029.

[[18]] Ma Y.; Chen Z.; Ye J.; Wang L.; Zhang J. Experimental and Numerical Study on Fatigue Crack Growth of Bridge Suspender. Journal of Disaster Prevention and Mitigation Engineering 2019, 39, 23-30, doi:10.13409/j.cnki.jdpme.2019.01.004.

[[19]] Huang Y.; Yan Y.; Huang F.; Li H.; Qin L.; Zou Y. Technical Research on Fatigue Resistance and Durability of OVM250 Parallel Strand Cable System. Prestress Technology 2023, 1, 53-67, doi:10.59238/j.pt.2023.01.005.

[[20]] Sun G.; Zhong X.; Yu Q.; Li X. Experimental Study on Flexural Behavior of Lightweight Aggregate Concrete Composite Beams with HRB500 Rebars. Building Structure 2019, 49, 88-92, doi:10.19701/j.jzjg.2019.22.015.

[[21]] Zhang C.; Shao Y.; Zhu A.; Lao Y.; Xiao Z. Experimental Study of HRB500 Reinforced Light Aggregate Concrete Axial Compression Members. China Concrete and Cement Products 2018, 61-65, doi:10.3969/j.issn.1000-4637.2018.12.015.

[[22]] Xiao Z.; Shao Y.; Lao Y.; Zhang C. Bearing Capacity of Lightweight Aggregate Concrete Members with HRB500 Reinforcement Cage Under Local Compression. Journal of Guangxi University(Natural Science Edition) 2018, 43, 95-102, doi:10.13624/j.cnki.issn.1001-7445.2018.0095.

[[23]] Xiao Z.; Shao Y.; Zhu A.; Lao Y.; Zhang C. Experimental Study on Local Compressive Properties of HRB500 Reinforced Light Aggregate Concrete Beam Ends. China Concrete and Cement Products 2018, 68-72, doi:10.3969/j.issn.1000-4637.2018.01.015.

[[24]] Bian Z.; Ge Q. Experimental Study on Shear Resistance of Steel Fiber HRB500High-Strength Reinforced Concrete Beams and Calculation of Shear Capacity. Journal of Chongqing Technology and Business(Natural Sciences Edition) 2018, 35, 94-99, doi:10.16055/j.issn.1672058X.2018.0002.017.

[[25]] Tang W.; Ren B.; Zhang C.; Yao W. Experimental Study on Seismic Performance of C80 Concrete Columns with Large Spacing HRB500 Reinforcement. Building Science 2020, 36, 59-67,139, doi:10.13614/j.cnki.11-1962/tu.2020.05.010.

[[26]] Wang X.; Bai Y.; Zhu J. Experimental Study on Flexural Performance of 600Mpa Reinforced Concrete Beam Under Normal Use State. Industrial Construction 2020, 50, 20-25, doi:10.13204/j.gyjz201904280010.

[[27]] Xiong H.; Mu F.; Ge J.; Yu S.; Feng J. Experimental Study on Flexural Performance of 600 MPa Grade Reinforced Concrete Beam. Industrial Construction 2018, 48, 77-82, doi:10.13204/j.gyjz201812015.

[[28]] Zhang J.; Guo W.; Feng C.; Cao W. Flexural Performance of HRB600 Grade Reinforced Steel Fiber High-Strength Concrete Beam. Industrial Construction 2020, 50, 49-54, doi:10.13204/j.gyjzG19082704.

[[29]] Zhang J.; Jiang L.; Qiao Q.; Xia D. Experimental Study on Flexural Performance Of HRB600 Grade Reinforced High-Strength Concrete Beams. Industrial Construction 2017, 47, 6-12, doi:10.13204/j.gyjz201706002.

[[30]] Zhang J.; Li C.; Feng C.; Cao W. Experimental Study on Bond Behavior Between HRB600 Steel Bars and High-strength Concrete. Journal of Beijing University of Technology 2019, 45, 566-574, doi:10.11936/bjutxb2017110048.

[[31]] Zhang J.; Liu J.; Cai R.; Zhang D. Experimental Study on Flexural Behavior of Semi-Precast Steel Fiber Reinforced High-Strength Concrete Beams with HRB600 Steel Bars. Building Structure 2021, 51, 48-53+47, doi:10.19701/j.jzjg.2021.05.007.

[[32]] Cui C. Numerical Analysis of Flexural Performance of HRB600 Reinforced Concrete Beams. Journal of Lanzhou Institute of Technology 2018, 25, 33-37, doi:10.3969/j.issn.1009-2269.2018.06.008.

[[33]] Zhang B.; Qiu L.; Chen X.; Zhou Z.; Liu B. Study on Symmetric Reinforcement Calculation of Rectangular Section Column with HRB600 Reinforcing Bars Under Eccentric Compression. Building Structure 2021, 51, 116-120, doi:10.19701/j.jzjg.2021.16.019.

[[34]] Zhang J.; Xia D.; Qiao Q.; Jiang L. Axial Compressive Performance of HRB600 Grade Reinforced High-Strength Concrete Columns. Industrial Construction 2017, 47, 77-83, doi:10.13204/j.gyjz201711016.

[[35]] Zhang J.; Xia D.; Qiao Q.; Jiang L. Experimental Study on Eccentric Compression Performance of High-Strength Concrete Columns with HRB600 Steel Bars. Journal of Building Structures 2019, 40, 74-80, doi:10.14006/j.jzjgxb.2019.04.008.

[[36]] Zhang J.; Zhang D.; Feng C.; Cao W. Experimental Research on Shear Performance of HRB600 Steel and High-Strength Concrete Beams Without Web Reinforcement. In Proceedings of the Proceedings of the 28th National Academic Conference on Structural Engineering, Nanchang, Jiangxi Province,China, 2019; pp. 88-95.

[[37]] Zhang J.; Zhang D.; Feng C.; Cao W. Experimental Research on Shear Performance of HRB600 Steel and High-Strength Concrete Beams Without Web Reinforcement. Engineering Mechanics 2020, 37, 275-281, doi:10.6052/j.issn.1000-4750.2019.04.S050.

[[38]] Rong X.; Du J.; Chen C.; Chang W.; Zhang J. Experiment Research on Seismic Performance of Column Reinforced with HRB600E Bars. Journal of Civil and Environmental Engineering 2019, 41, 69-76, doi:10.11835/j.issn.2096-6717.2019.073.

[[39]] Zhang J.; Li C.; Feng C.; Lu D. Seismic Behavior of Steel Fiber High-Strength Concrete Columns with HRB600 Steel Bars. Journal of Building Structures 2019, 40, 113-121, doi:10.14006/j.jzjgxb.2019.0052.

[[40]] Zhang J.; Li C.; Li X.; Cao W.; Feng C. Experimental Study on Seismic Behavior of High-Strength Concrete Columns with HRB600 Steel Bars. China Civil Engineering Journal 2019, 52, 6-17, doi:10.15951/j.tmgcxb.20190225.001.

[[41]] S, R. Use and application of high-performance steels for steel structures; IABSE: 2005.

[[42]] Wang J. Application of High-tensile Steel and High-quality Steel Abroad. Communications Standardization 2008, 121-123, doi:10.3869/j.issn.1002-4786.2008.09.033.

[[43]] Gao Z.; Fang Q.; Wei J. Development and Prospects for Technology of Railway Bridge in China. Journal of Railway Engineering Society 2007, 55-59, doi:10.3969/j.issn.1006-2106.2007.01.008.

[[44]] Zheng K.; Zhang Y.; Heng J.; Wang Y. High Strength Weathering Steel and Its Application and Prospect in Bridge Engineering. Journal of Harbin Institute of Technology 2020, 52, 1-10, doi:10.11918/201907021.

[[45]] Zhang C. Design and Construction Application of HRB500 High-Strength Steel Bar in Qugang High-Speed Bridge Project. Highway Traffic Technology (Applied Technology Edition) 2018, 14, 15-17.