Micromachined Infrared Thermopile Detector Based on a Suspended Film Structure

Abstract

The micro-electromechanical system (MEMS) infrared thermopile is the core working device of modern information detection systems such as spectrometers, gas sensors, and remote temperature sensors. We presented two different structures of MEMS infrared thermopiles based on suspended film structures. They both deposited silicon nitride over the entire surface as a passivated absorber layer in place of a separate absorber zone, and the thermocouple strip was oriented in the same direction as the temperature gradient. The same MEMS preparation process was used and finally two different structures of the thermopile were characterized separately for testing to verify the impact of our design on the detector. The test results show that the circular and double-ended symmetrical thermopile detectors have responsivities of 27.932 V/W and 23.205 V/W, specific detectivities of 12.1×10⁷ cm·Hz^1/2·W⁻¹ and 10.1×10⁷ cm·Hz^1/2·W⁻¹, and response time of 26.2 ms and 27.06 ms, respectively. In addition, rectangular double-ended symmetric thermopile has a larger field of view than a circular thermopile detector, but is not as mechanically stable as a circular thermopile.

Keywords

Adiabatic groove / circular arrangement / double-ended symmetrical arrangement / thermopile / temperature gradient

References

[1] Graf A, Arndt M, Gerlach G. Seebeck’s effect in micromachined thermopiles for infrared detection. A Review, 2007, 13(4): 338-353.

[2] Xu D H, Wang Y L, Xiong B, Li T. MEMS-based thermoelectric infrared sensors: a review. Frontiers of Mechanical Engineering, 2017, 12(4): 557-566.

[3] Hou H G, Huang Q, Liu G, Qiao G. Enhanced performances of CMOS-MEMS thermopile infrared detectors using novel thin film stacks. Infrared Physics and Technology, 2019, 102, 103058.

[4] Zhou N, Ding X, Li H, Ni Y, Pu Y, Mao H, . A thermopile detector based on micro-bridges for heat transfer. Micromachines, 2021, 12(12): 1554.

[5] C. Zhang, “Research on high absorption heat conduction MEMS thermopile infrared detector technology,” Ph.D. dissertation, North University of China, 2021.

[6] C. Zhang, H. Mao, M. Shi, J. Xiong, K. Long, and D. Chen, “A fiber-Si₃N₄ composite nanoforest with high 7.6 to 11.6 um absorption for MEMS infrared sensors,” in Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Canada, 2020, pp. 949–952.

[7] Shen T W, Chang K C, Sun C M, Fang W. Performance enhance of CMOS-MEMS thermoelectric infrared sensor by using sensing material and structure design. Journal of Micromechanics and Microengineering, 2019, 29(2): 025007.

[8] Ashraf S, Mattsson C G, Thungström G. Fabrication and characterization of a SU-8 epoxy membrane-based thermopile detector with an integrated multilayered absorber structure for the mid-IR region. IEEE Sensors Journal, 2019, 19(11): 4000-4007.

[9] Zhou N, Li J, Mao H, Liu H, Gao J, Xiang J, . The study of reactive ion etching of heavily doped polysilicon based on HBr/O₂/He Plasmas for thermopile devices. Materials, 2020, 13(19): 4278.

[10] Li M, Shi M, Wang B, Zhang C, Yang S, Yang Y, . Quasi-ordered nanoforests with hybrid plasmon resonances for broadband absorption and photodetection. Advanced Functional Materials, 2021, 31(38): 2102840.

[11] Lei C, Mao H Y, Ou W, Xue C, Tang L, Yang T, . A CMOS-MEMS IR device based on double-layer thermocouples. Microsystem Technologies, 2016, 22, 1163-1171.

[12] Wang Z, Leonov V, Fiorini P, Van Hoof C. Realization of a wearable miniaturized thermoelectric generator for human body applications. Sensors and Actuators A: Physical, 2009, 156(1): 95-102.

[13] Li Y, Zhou H, Li T, Wang Y, Liu Y, Wang Y. CMOS-compatible 8×2 thermopile array. Sensors and Actuators A: Physical, 2010, 161(1): 120-126.

[14] Zhou H, Kropelnicki P, Tsai J M, Lee C. Development of a thermopile infrared sensor using stacked double polycrystalline silicon layers based on the CMOS process. Journal of Micromechanics and Microengineering, 2013, 23(6): 065026.

[15] Choi I H, Wise K D. A silicon-thermopile-based infrared sensing array for use in automated manufacturing. IEEE Transactions on Electron Devices, 1986, 33(1): 72-79.

[16] C. Lei, “Key technology research on double-ended beam MEMS thermopile infrared detector,” Ph.D. dissertation, North University of China, 2016.

[17] Liang T, Guan Y, Lei C, Wu X, Bai Y, Xiong J, . Design and fabrication of a low-cost thermopile infrared detector. Micromachines, 2021, 12(9): 1134.

[18] Guan Y, Lei C, Liang T, Bai Y, Wu X, Xiong J, . Design, preparation and characterization of a double-ended symmetric MEMS thermopile with adiabatic grooves. Infrared Physics & Technology, 2022, 122, 104078.