Molecularly Imprinted Polymers Based Surface Plasmon Resonance Sensor for Sulfamethoxazole Detection
Önder Kurç , Deniz Türkmen
Photonic Sensors ›› 2021, Vol. 12 ›› Issue (4) : 220417
Sulfamethoxazole (SMX) is a sulfonamide antibiotic primarily used to treat urinary tract infections and used in veterinary and industrialized husbandry to treat diseases and food additives. Like other antibiotics, SMX is considered as a pollutant in water and food that threaten local life. This study developed a surface plasmon resonance (SPR) sensor chip that is fast, highly selective, and reusable, and requires no pretreatment for detecting SMX. As a receptor, SMX imprinted methacrylic acid-2-hydroxyethyl methacrylate-ethylene glycol dimethacrylate polymer [poly(MAA-HEMA-EGDMA)] was used. The surface of the gold SPR chips was coated with a drop-casting method. The nanofilm coated chips were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), ellipsometer, contact angle measurement, and Fourier-transform infrared spectrometry (FTIR). Imprinting factor (IF) was calculated as: ΔR[MIP(molecularly imprinted polymers)]/ΔR[NIP(non-imprinted)]=12/3.5=3.4. Limit of detection (LOD) and limit of quantification (LOQ) values were calculated with 3 s/m and 10 s/m methods, and the results were found to be 0.001 1 µg/L for LOD 0.003 4 µg/L for LOQ. Adsorption studies on both standard SMX solution and commercial milk samples were applied. Also, we investigated the developed chip’s reusability, storability, and selectivity with amoxicillin and cefalexin.
Antibiotic / sulfamethoxazole / nanofilm chip / molecularly imprinted polymers (MIP) / surface plasmon resonance (SPR)
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
|
| [23] |
|
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
| [30] |
|
| [31] |
S. Akgönüllü, C. Armutcu, and A. Denizli, “Molecularly imprinted polymer film based plasmonic sensors for detection of ochratoxin A in dried fig,” Polymer Bulletin, 2021, DOI: https://doi.org/10.1007/s00289-021-03699-6. |
| [32] |
|
| [33] |
|
| [34] |
|
| [35] |
|
| [36] |
|
| [37] |
|
| [38] |
|
| [39] |
|
| [40] |
|
| [41] |
|
| [42] |
|
| [43] |
|
| [44] |
|
| [45] |
|
| [46] |
J. Wollschlaeger and K. O. Möller, “Ocean in situ sensors: new developments in biological sensors,” Challenges and Innovations in Ocean In Situ Sensors: Measuring Inner Ocean Processes and Health in the Digital Age, 2019: 81–116. |
| [47] |
|
| [48] |
|
| [49] |
|
| [50] |
|
| [51] |
|
| [52] |
|
| [53] |
|
| [54] |
|
| [55] |
|
| [56] |
|
| [57] |
|
| [58] |
|
| [59] |
|
| [60] |
|
| [61] |
|
/
| 〈 |
|
〉 |