Design of an All-Fiber Fabry-Perot Sensor for Strain Measurement in Radiative Environment
Tingting Yang , Zengling Ran , Xiu He , Lupeng Gan , Zhengxi He , Jialiang Zhu , Peng He , Zhuoyue Li , Dong Sun
Photonic Sensors ›› 2021, Vol. 12 ›› Issue (4) : 220418
Design of an All-Fiber Fabry-Perot Sensor for Strain Measurement in Radiative Environment
A length-matched micro Fabry-Perot (FP) interferometer is proposed for strain measurement under irradiation environment. Theoretical simulation shows that a well length-matched FP sensor can achieve a very low drift of the cavity length and strain sensitivity in irradiation environment. In experiment, such an FP cavity is realized by laser micromachining. It shows a low cavity length drift of −0.037 µm and a strain sensitivity deviation of 0.52%, respectively, under gamma irradiation. Meanwhile, the intensity of interference fringes is also stable. As a result, such a length-matched FP cavity is a very promising candidate for strain sensing in radiative environments.
Gamma radiation / Fabry-Perot sensor / radiation-induced compaction / strain sensing
| [1] |
F. Berghmans, A. F. Fernandez, B. Brichard, F. Vos, M. C. Decreton, A. I. Gusarov, et al., “Radiation hardness of fiber optic sensors for monitoring and remote handling applications in nuclear environments,” in Proceedings of SPIE — The International Society for Optical Engineering, Boston, November 2–5, 1998, pp. 28–39. |
| [2] |
|
| [3] |
|
| [4] |
G. Cheymol, C. Aubisse, B. Brichard, and M. Jacobs, “Fabry Perot sensor for in-pile nuclear reactor metrology,” in Optical Sensors 2008, Strasbourg, 2008, pp. 700305. |
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
/
| 〈 |
|
〉 |