Design and Simulation of a Highly Sensitive SPR Optical Fiber Sensor

Abstract

An idea of the surface plasmon resonance (SPR) has been utilized for the design of highly sensitive sensors based on the wagon-wheel fiber technology. Such sensors are sensitive to changes in the refractive index of sample analyte. In this study, a three-strut wagon-wheel structure, coated with the gold layer of nano-sized thickness, has been proposed as the SPR sensor. Finite element method is employed to simulate and tune the proposed SPR’s design, which leads to a highly sensitive and multichannel plasmonic sensor with the ability for a dual reading on a single analyte or simultaneous identification of two analytes. In this design, suitable thickness values for the gold layer and core struts are determined. Sensitivities of the detector due to the first resonance peak, second resonance peak, and the difference in resonance peaks are calculated to be 1120 nm/RIU, 1540 nm/RIU, and 420 nm/RIU, respectively, when analytes are placed in all three channels of the fiber. Sensitivity of the detector with respect to the second resonant peak for analyte in Channels 2 and 3 is also found to be 1252 nm/RIU when Channel 1 is filled with the reference. The sensitivity and resolution of the sensor increase as the refractive index of the analyte increases by almost a linear proportion. If the sensor is utilized to detect the difference in two peaks, it would substantially reduce the noise, and the best result is expected. The thicknesses of the struts and the gold layer are proper parameters to be tuned in designing the detector.

Keywords

Plasmonics / surface plasmon-polaritons / sensor / wagon-wheel fiber

References

[1] Kretschmann E., Raether H.. Radiative decay of non-radiative surface plasmons excited by light. Zeitschrift für Naturforschung, 1968, 23(12): 2135-2136.

[2] Otto A.. Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection. Zeitschrift für Physik A Hadrons and Nuclei, 1968, 216(4): 398-410.

[3] Homola J., Vaisocherova H., Dostalek J., Piliarik M.. Multi-analyte surface plasmon resonance biosensing. Methods, 2005, 37(1): 26-36.

[4] Hoa X. D., Kirk A. G., Tabrizian M.. Towards integrated and sensitive surface plasmon resonance biosensors: a review of recent progress. Biosensors and Bioelectronics, 2007, 23(2): 151-160.

[5] Gorman E. K. A. T., Haxha S., Oliver J. V.. Dual channel planar waveguide surface plasmon. Journal of the Optical Society of America, 2007, 24(6): 1423-1429.

[6] Peng W., Banerji S., Kim Y. C., Booksh K. S.. Investigation of dual-channel fiber-optic surface plasmon resonance sensing for biological applications. Optics Letters, 2005, 30(22): 2988-2990.

[7] Špačková B., Piliarik M., Themistos C., Rajarajan M., Homola J.. Novel concept of multi-channel fiber optic surface plasmon resonance sensor. Sensors & Actuators B Chemical, 2009, 139(1): 199-203.

[8] Zhang Z. Y., Zhao P., Sun F. G., Xiao G. Z., Wu Y. M.. Self-referencing in optical-fiber surface plasmon resonance sensors. IEEE Photonics Technology Letters, 2007, 19(24): 1958-1960.

[9] Wang Y., Meng S. W., Liang Y. Z., Li L. X., Peng W.. Fiber-optic surface plasmon resonance sensor with multi-alternating metal layers for biological measurement. Photonic Sensors, 2013, 3(3): 202-207.

[10] Homola J., Koudela I., Yee S. S.. Surface plasmon resonance sensors based on diffraction gratings and prism couplers: sensitivity comparison. Analytical & Bioanalytical Chemistry, 1999, 54(1): 16-24.

[11] Homola J., Yee S. S., Gauglitz G.. Surface plasmon resonance sensors: review. Sensors and Actuators B Chemical, 1999 54.

[12] Cennamo N., Massarotti D., Conte L., Zeni L.. Low cost sensors based on SPR in a plastic optical fiber for biosensor implementation. Sensors, 2011, 11(12): 11752-11760.

[13] Chen Y. Z., Xie Q. L., Li X. J., Zhou H. S., Hong X. M., Geng Y. F.. Experimental realization of D-shaped photonic crystal fiber SPR sensor. Journal of Physics D Applied Physics, 2016, 50(2): 025101-025107.

[14] Hautakorpi M., Mattinen M., Ludvigsen H.. Surface-plasmon-resonance sensor based on three-hole microstructured optical fiber. Optics Express, 2008, 16(12): 8427-8432.

[15] Zhang Y. T., Zhou C., Xia L., Yu X., Liu D. M.. Wagon-wheel fiber based multichannel plasmonic sensor. Optics Express, 2011, 19(23): 22863-22873.

[16] Olmon R. L., Slovick B., Johnson T. W., Shelton D., Oh S. H., Boreman G. D., . Optical dielectric function of gold. Physical Review B Condensed Matter, 2012, 86(23): 235147.

[17] Ahmadi A. R.. SyNA, A general purpose finite element software system. Ph.D. dissertation Computational Research Center at Graduate University of Advanced Technology, 2010

[18] Dehghanifard Z., Ahmadi A. R., Ganjovi A. R., Bolorizadeh M. A.. Space-time coupled finite element simulation of PECVD reactor. International Journal of Applied and Computational Mathematics, 2016, 2(3): 1-11.

[19] Jiang B. N., Povineli L. A., Wu J.. The origin of spurious solutions in computational electromagnetics. Journal of Computational Physics, 1996, 125(1): 1597-1630.

[20] Yu X., Zahng S. Y., Zhang Y., Ho H. P., Shum P., Liu H. R., . An efficient approach for investigating surface plasmon resonance in asymmetric optical fibers based on birefringence analysis. Optics Express, 2010, 18(17): 17950-17957.

[21] Mohr F.. Gold chemistry: applications and future directions in the life sciences, 2009 1-408.