Temperature insensitive bending sensor based on in-line Mach-Zehnder interferometer

Abstract

A simple and compact fiber bending sensor based on the Mach-Zehnder interferometer was proposed. A photonic crystal fiber (PCF) with a length of 10 mm was spliced by collapsing air holes with two conventional single mode fibers to consist of an all fiber bending sensor. The sensitivity of 0.53 nm/m⁻¹ was obtained at 1586 nm for the curvature range from 0 to 8.514 m⁻¹. The temperature sensitivity was very low. The measurement error due to the temperature effect was about 8.68×10⁻³ m⁻¹/°c, and the temperature effect in the curvature measurement could be ignored. This device can avoid the cross sensitivity of the temperature in the curvature measurement.

Keywords

Photonic crystal fiber / Mach-Zehnder interferometer / bending sensor

References

[1] Gong H P, Chan C C, Zu P, Chen L H, Dong X Y. Curvature measurement by using low-birefringence photonic crystal fiber based Sagnac loop. Optics Communications, 2010, 283(16): 3142-3144.

[2] Guzman-Sepulveda J R, May-Arrioja D A. In-fiber directional coupler for high-sensitivity curvature measurement. Optics Express, 2013, 21(10): 11853-11861.

[3] Yu X, Shum P, Dong X. Photonic-crystal-fiber-based Mac-Zehnder interferometer using long-period gratings. Microwave And Optical Technology Letters, 2006, 48(7): 1379-1383.

[4] Gouveia C, Jorge P A S, Baptista J M, Frazao O. Temperature-independent curvature sensor using FBG cladding modes based on a core misaligned splice. IEEE Photonics Technology Letters, 2011, 23(12): 804-806.

[5] Shin W, Lee Y L, Yu B A, Noh Y C, Ahn T J. Highly sensitive strain and bending sensor based on in-line fiber Mach-Zehnder interferometer in solid core large mode area photonic crystal fiber. Optics Communications, 2010, 283(10): 2097-2101.

[6] Lim J H, Jang H S, Lee K S, Kim J C, Lee B H. Mach-Zehnder interferometer formed in a photonic crystal fiber based on a pair of long-period fiber gratings. Optics Letters, 2004, 29(4): 346-348.

[7] Wang Y P, Rao Y J. A novel long period fiber grating sensor measuring curvature and determining bend-direction simultaneously. IEEE Sensors Journal, 2005, 5(5): 839-843.

[8] Wong W C, Chan C C, Gong H, Leong K C. Mach-Zehnder photonic crystal interferometer in cavity ring-down loop for curvature measurement. IEEE Photonics Technology Letters, 2011, 23(12): 795-797.

[9] Villatoro J, Minkovich V P, Pruneri V, Badenes G. Simple all-microstructured-optical-fiber interferometer built via fusion splicing. Optics Express, 2007, 15(4): 1491-1496.

[10] Zheng J, Yan P, Yu Y, Ou Z, Wang J, Chen X, . Temperature and index insensitive strain sensor based on a photonic crystal fiber in line Mach-Zehnder interferometer. Optics Communications, 2013, 297(15): 7-11.

[11] Ou Z, Yu Y, Yan P, Wang J, Huang Q, Chen X, . Ambient refractive index-independent bending vector sensor based on seven-core photonic crystal fiber using lateral offset splicing. Optics Express, 2013, 21(20): 23812-23821.

[12] Liu Y, Williams J A R, Bennion I. Optical bend sensor based on measurement of resonance mode splitting of long-period fiber grating. IEEE Photonics Technology Letters, 2000, 12(5): 531-533.

[13] Patrick H J, Chang C C, Vohra S T. Long period fiber gratings for structural bend sensing. Electronics Letters, 1998, 34(18): 1773-1775.