Application of Brillouin optical correlation domain analysis for crack identification in concrete structure

Abstract

This paper investigates the application of distributed optical fiber strain sensors to civil engineering structures, because no other tool can satisfactorily detect the location of the unpredictable phenomenon. In fact, the locations of cracks in the concrete structure are unknown a priori; therefore, a fully distributed sensor is necessary to detect them. The Brillouin optical correlation domain analysis (BOCDA), which offers high spatial resolution by using stimulated Brillouin scattering along the whole length of the optical fiber, is used in a wide range of civil engineering applications, and the same has undergone significant development over the last decade. In this paper, it is demonstrated how a BOCDA-based strain sensor can be employed to monitor cracks in concrete. Crack monitoring on the surface of the concrete member provides useful information for evaluating stiffness and durability of the structure, particularly for early detection of tiny cracks, which is essential for preventing crack growth and dispersion. The crack-induced strain distribution was analytically investigated, and it was proved that BOCDA can identify even a small crack before its visual recognition by a beam test. Moreover, periodical crack monitoring was successfully executed on a pedestrian deck for five years.

Keywords

Stimulated Brillouin scattering / optical fiber sensor / strain measurement / distributed sensing

References

[1] Fujino Y, Takada T. Fujino Y, Noguchi T. Risk assessment, management and monitoring of infrastructure systems. Stock management for sustainable urban regeneration, 2009, Japan: Springer Japan, 233-253.

[2] Glisic B, Inaudi D. Fibre optic methods for structural health monitoring, 2007, UK: Wiley, 19-40.

[3] Hotate K, Ong S S. Distributed fiber Brillouin strain sensing by correlation-based, continuous-wave technique, cm-order spatial resolution and dynamic strain measurement. Proc. SPIE, 2002, 4920, 299-310.

[4] Naruse H, Uchiyama Y, Kurashima T, Shuji U. River levee change detection using distributed fiber optic strain sensor. IEICE Transactions on Electronics, 2000, 83(3): 462-467.

[5] Vorster T, Soga K, Mair R, Bennett P, Klar A, Choy C. The use of fiber optic sensors to monitor pipeline response to tunneling. GeoCongress 2006: Geotechnical Engineering in the Information Technology Age, 2006 1-6.

[6] Imai M, Nakano R, Kono T, Ichinomiya T, Miura S, Mure M. Crack detection application for fiber reinforced concrete using BOCDA-based optical fiber strain sensor. Journal of Structural Engineering, 2010, 136(8): 1001-1008.

[7] Niu H, Wu Z S. Peeling-off criterion for FRP-strengthened R/C flexural members. Proc. of International Conference on FRP Composites in Civil Engineering, 2001, 1, 571-578.

[8] Duck G, LeBlanc M. Arbitrary strain transfer from a host to an embedded fiber-optic sensor. Journal of Smart Materials and Structures, 2000, 9(4): 492-497.

[9] Imai M, Feng M. Sensing optical fiber installation study for crack identification using a stimulated Brillouin-based strain sensor. Structural Health Monitoring, 2012, 11(5): 501-509.

[10] Li Z, Zhang Y. Chen W F, Lui E M. High-performance concrete. Handbook of structural engineering, 2005 2nd ed USA: CRC Press, 15-1-15-58.