Fiber-optic surface plasmon resonance sensor with multi-alternating metal layers for biological measurement

Abstract

Optical fiber based SPR sensors have attracted more and more attention due to their unique advantages over the prism-based SPR sensors. A novel fiber-optic SPR sensor with multi-alternating metal layers for biochemical analysis is presented in this paper. Based on the fundamental SPR theory of the fiber optic sensing technology, we theoretically investigated the effects of the existence of alternating layers deposited on sensing region SPR wavelength changes. The emphasis was placed on the numerical simulation of the fiber-optic SPR sensor’s sensitivity which could be affected by its technical parameters such as the metal thickness, number of alternating layers. Results showed that, compared to the normal SPR sensor with the single metal layer, the proposed sensor had a wider detecting range of the refractive index and higher sensitivity, which can find applications in biological analysis.

Keywords

Surface plasmon resonance / fiber optics / biological detection / alternating metal layers

References

[1] Green R J, Frazier R A, Shakeshe K M, Davies M C, Roberts C J, Tendler J B. Surface plasmon resonance analysis of dynamic biological interactions with biomaterials. Biomaterials, 2000, 21(8): 1823-1835.

[2] Lu H, Homola J, Campbell C T, Nenninger G G, Yee S S, Ratner B D. Protein contact printing for a surface plasmon resonance biosensor with on-chip referencing. Sensors and Actuators B: Chemical, 2001, 74(1–3): 91-99.

[3] Chena Y, Dong B, Zhou W. Surface plasmon resonance biosensor modified with multilayer silver nanoparticles films. Applied Surface Science, 2010, 257(3): 1021-1026.

[4] Pollet J, Delport F, Janssen K, Jans K, Maes G, Pfeiffer H, . Fiber optic SPR biosensing of DNA hybridization and DNA-protein interactions. Biosensors and Bioelectronics, 2009, 25(4): 864-869.

[5] Anuj K S, Gupta B D. Absorption-based fiber optic surface plasmon resonance sensor: a theoretical evaluation. Sensors and Actuators B: Chemical, 2004, 100(3): 423-431.

[6] Peng W, Banerji S, Kim Y, Booksh K S. Investigation of dual-channel fiber-optic surface plasmon resonance sensing for biological applications. Optics Letters, 2005, 30(22): 2988-2990.

[7] Lin C, Chen K, Hsiao C, Lin S, Lee C. Design and fabrication of an alternating dielectric multi-layer device for surface plasmon resonance sensor. Sensors and Actuators B: Chemical, 2006, 113(1): 169-176.

[8] Sharma A K, Moh G J. Theoretical understanding of an alternating dielectric multilayer-based fiber optic SPR sensor and its application to gas sensing. New Journal of Physics, 2008, 10(2): 023039.

[9] Li H, Jing Z, Peng W, Yu Q, Yao W, Hu L, . Theoretical study of high-sensitivity surface plasmon resonance fiber optic sensing technology. Proc. SPIE, 2011, 8191, 81911L.

[10] Jorgenson R C, Yee S S. A fiber-optic chemical sensor based on surface plasmon resonance. Sensors and Actuators B: Chemical, 1993, 12(3): 213-2220.

[11] Mitsushio M, Miyashita K, Higo M. Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu, and Al. Sensors and Actuators A: Physical, 2006, 125(2): 296-303.

[12] Obando L A, Gentleman D J, Holloway J R, Booksh K S. Manufacture of robust surface plasmon resonance fiber optic based dip-probes. Sensors and Actuators B: Chemical, 2004, 100(3): 439-449.