Continuous monitoring of mining induced strain in a road pavement using fiber Bragg grating sensors

Abstract

This paper describes the application of fiber Bragg grating (FBG) based sensors for monitoring road pavement strains caused by mining induced ground subsidence as a result of underground longwall coal mining beneath a major highway in New South Wales, Australia. After a lengthy planning period, the risks to the highway pavement were successfully managed by the highway authority and the mining company through a technical committee. The technical committee comprised representatives of the mining company, the highway authority and specialists in the fields of pavement engineering, geotechnical engineering and subsidence. An important component of the management strategy is the installation of a total of 840 strain and temperature sensors in the highway pavement using FBG arrays encapsulated in glass-fiber composite cables. The sensors and associated demodulation equipment provide continuous strain measurements along the pavement, enabling on-going monitoring of the effects of mining subsidence on the pavement and timely implementation of planned mitigation and response measures to ensure the safety and serviceability of the highway throughout the mining period.

Keywords

Sensing / monitoring / fiber Bragg grating / pavement strain / distributed sensors

References

[1] Kashyap R.. Fiber Bragg Gratings, 1999, San Diego, CA: Academic Press

[2] Hill K. O., Fuiji Y., Johnson D. C., Kawasaki B. S.. Photosensitivity in optical fiber waveguides: application to reflection filter fabrication. Applied Physics Letters, 1978, 32(10): 647-649.

[3] Udd E.. Fiber optic smart structure, 1995, New York: John Wiley & Sons

[4] D. Kay, B. Whelan, G. Donald, and H. Pinkster, “Monitoring mining-induced strain in a road pavement using optical fibers”, presented at Proceedings of the Seventh Triennial Conference on Mine Subsidence, Wollongong, Australia, Nov., 2007.

[5] D. Kay, H. Buys, G. Donald, M. Howard, and P. Pells. “Management of the hume highway pavement for mine subsidence impacts from longwall mining,” in Proceedings of the 8th Triennial Conference on Mine Subsidence, Hunter Valley, Australia, pp. 247–256, May 2011.

[6] Boller C., Chang F. K., Fujino Y.. Encyclopedia of Structural Health Monitoring, 2007, New York: John Wiley & Sons

[7] Childers B. A., Froggatt M. E., Allison S. G., Moore T. C., Hare D. A., Batten C. F., . Use of 3000 Bragg grating strain sensors distributed on four eight-meter optical fibers during static load tests of a composite structure. Proc. SPIE, 2001, 4332, 133-142.

[8] Feced R., Roe-Edwards M. P., Kanellopoulos S. E., Taylor N. H., Handerek V. A.. Mechanical strength degradation of UV exposed optical fibers. Electronics Letters, 1997, 33(2): 157-159.

[9] Culshaw B., Dakin J.. Optical Fiber Sensors Volume Three: Components and Subsystems, 1996, London: Artech House