Analog processing based vibration measurement technique using michelson interferometer

Abstract

A Michelson interferometer based sensor, to monitor the displacement and vibration of a surface, is presented. The interference signals detected in quadrature are processed using analog electronics to find the direction of the motion of a vibrating surface in real-time. The complete instrumentation and signal processing are implemented for the interpretation of the amplitude as well as positive and negative excursion of the vibration cycles. This new technique is simpler as compared to the techniques commonly used in the interferometer based vibration sensors. Using this technique, we have measured mechanical vibrations having a magnitude of the order of nanometers and frequency in the range of 50 Hz to 500 Hz. By making small changes in the electronic circuit, the technique can be implemented for the extended range of the vibration frequencies and amplitude.

Keywords

Vibration sensor / displacement sensor / Michelson interferometer / direction detection / analog processing

References

[1] Vest C. M., Sweeney D. W.. Measurement of vibrational amplitude by modulation of projected fringes. Applied Optics, 1972, 11(2): 449-454.

[2] Koyuncu B., Cookson J.. Semi-automatic measurements of small high-frequency vibrations using time averaged electronic speckle pattern interferometry. Journal Physics E: Scientific Instruments, 1980, 13(12): 206-208.

[3] Prakash S., Singh I. P., Shakher C.. Display of tilt information of vibrating object in time average mode using lateral shearing interferometry and interferometric grating. Optics and Laser Technology, 2001, 33(2): 117-120.

[4] Yuan L.. Recent progress of in-fiber integrated interferometers. Photonic Sensors, 2011, 1(1): 1-5.

[5] Weir K., Boyle W. J. O., Meggitt B. T., Palmer A. W., Grattan K. T. V.. A novel adaptation of the Michelson interferometer for the measurement of vibration. Journal of Lightwave Technology, 1992, 10(5): 700-703.

[6] Boullosa R. R., Lopez A. P.. A simple measurement system for vibrations at low amplitudes. Applied Acoustics, 1997, 52(2): 155-163.

[7] Rao Y.. Study on fiber-optic low-coherence interferometric and fiber Bragg grating sensors. Photonic Sensors, 2011, 1(4): 382-400.

[8] Shakher C., Vyas A. L., Seth A.. Real time monitoring of vibrations using interferometric sensor. Proc. ICICS 97, Singapore, Sept. 9–12, 1997, 2, 1185-1188.

[9] Ding D. H. S., Tong L. G., Chen G. H.. A sensitive and stable confocal Fabry-Perot interferometer for surface ultrasonic vibration detection. Chinese Physics, 2001, 10(8): 730-734.

[10] Jiang Y., Ding W.. Recent developments in fiber optic spectral white-light interferometry. Photonic Sensors, 2011, 1(1): 62-71.

[11] Moore A. J., McBride R., Barton J. S., Jones J. D. C.. Closed-loop phase stepping in a calibrated fiber-optic fringe projector for shape measurement. Applied Optics, 2002, 41(16): 3348-3354.

[12] Gangopadhay T. K.. Non-contact vibration measurement based on an extrinsic Fabry-Perot interferometer implemented using arrays of single-mode fibers. Measurement Science Technology, 2004, 15(5): 911-917.

[13] Garcia-Souto J. A., Lamela-Rivera H.. High resolution (<1 nm) interferometric fiber-optic sensor of vibrations in high-power transformers. Optical Express, 2006, 14(21): 9679-9686.

[14] Yuan L., Dong Y.. Loop topology based white light interferometric fiber optic sensor network for application of perimeter security. Photonic Sensors, 2011, 1(3): 260-267.

[15] Yu Q., Zhou X.. Pressure sensor based on the fiber optic extrinsic Fabry-Perot interferometer. Photonic Sensors, 2011, 1(1): 72-83.

[16] Siegmund G.. Sources of measurement error in laser Doppler vibrometers and proposal for unified specifications. Proc. SPIE, 2008, 7098, 70980Y-1-70980Y-13.