How Can Technology Improve Acetabular and Pelvic Fractures Management in the Operating Room? A Systematic Review

Abstract

In recent years, there has been a proliferation of literature describing new technologies increasingly integrated into the surgical management of pelvic fractures. However, the available data are heterogeneous, scattered, and sometimes limited to small series or single-center studies. This review aims to present new technologies in the field of pelvic and acetabular fractures and explore their potential benefits for surgeons and patients. The goal is to describe current concepts, advantages, and limitations and to open a discussion about future use and development. The search was conducted through Medline, Central and Embase databases from inception to January 2025 following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) protocol. A total of 841 records were reviewed and 115 studies were included according to the inclusion and exclusion criteria. Technologies such as robotics, navigation, patient-specific management, and 3D printing are being developed for the management of pelvic injuries. These technologies demonstrate greater surgical accuracy without increasing complications. In pelvic and acetabular fractures surgery, new technologies are very attractive and are a promising help for management of these complex injuries and need to be improved before being included in routine care.

Keywords

3D printing / acetabular fracture / navigation / patient specific / pelvic fracture / robot

References

[1] M. Boudissa, G. Khoury, J. Franke, A. Gänsslen, and J. Tonetti, “Navigation and 3D-Imaging in Pelvic Ring Surgery: A Systematic Review of Prospective Comparative Studies,” Archives of Orthopaedic and Trauma Surgery 144, no. 10 (2024): 4549–4559.

[2] D. Hernandez, R. Garimella, A. E. M. Eltorai, and A. H. Daniels, “Computer-Assisted Orthopaedic Surgery,” Orthopedic Surgery 9, no. 2 (2017): 152–158.

[3] S. Y. Vetter, N. Beisemann, A. Hogan, J. von Recum, P. A. Grützner, and J. Franke, “(ii) Computer Assisted Surgery in Trauma and Osteotomy,” Orthopaedics and Traumatology 28, no. 5 (2014): 286–293.

[4] E. B. M. Elsman, L. B. Mokkink, C. B. Terwee, et al., “Guideline for Reporting Systematic Reviews of Outcome Measurement Instruments (OMIs): PRISMA-COSMIN for OMIs 2024,” Quality of Life Research 33, no. 8 (2024): 2029–2046.

[5] M. S. Ead, L. Westover, S. Polege, S. McClelland, J. L. Jaremko, and K. K. Duke, “Virtual Reconstruction of Unilateral Pelvic Fractures by Using Pelvic Symmetry,” International Journal of Computer Assisted Radiology and Surgery 15, no. 8 (2020): 1267–1277.

[6] Z. Zhu, B. Tan, D. Wei, et al., “Percutaneous Robot-Assisted Screw Fixation for Nondisplaced Pelvic Fractures: A Good Choice?,” International Orthopaedics 47, no. 6 (2023): 1601–1608.

[7] X. B. Wu, J. Q. Wang, X. Sun, and C. P. Zhao, “Guidance for Treatment of Pelvic Acetabular Injuries With Precise Minimally Invasive Internal Fixation Based on the Orthopaedic Surgery Robot Positioning System,” Orthopedic Surgery 11, no. 3 (2019): 341–347.

[8] M. Wang, S. Zheng, Y. Zhang, and J. Lu, “Analysis of the Therapeutic Efficacy of Robot-Assisted Percutaneous Screw Fixation in the Minimally Invasive Treatment of Pelvic Fractures,” Frontiers in Surgery 11 (2024): 1392719.

[9] C. Zhao, H. Xiao, Q. Cao, et al., “Innovative Development of Robot Reduction System in Geriatric Pelvic Fractures: A Single-Center Case Series in Beijing, China,” Journal of Orthopaedic Translation 49 (2024): 283–288.

[10] C. Zhao, Y. Wang, X. Wu, G. Zhu, and S. Shi, “Design and Evaluation of an Intelligent Reduction Robot System for the Minimally Invasive Reduction in Pelvic Fractures,” Journal of Orthopaedic Surgery and Research 17, no. 1 (2022): 205.

[11] C. Shi, Q. Yang, Y. Wang, et al., “Automatic Path Planning for Pelvic Fracture Reduction With Multi-Degree-Of-Freedom,” Computer Methods and Programs in Biomedicine 261 (2025): 108591.

[12] M. Pan, Y. Chen, Z. Li, X. Liao, Y. Deng, and G. B. Bian, “Autonomous Path Planning for Robot-Assisted Pelvic Fracture Closed Reduction With Collision Avoidance,” International Journal of Medical Robotics 19, no. 2 (2023): e2483.

[13] J. Liu, Y. Yan, K. Xu, et al., “Biomechanical Analysis of Pelvic Holding Pathways and Strategies for Use of the Steinmann Pin in Pelvic Fracture Reduction,” Computers in Biology and Medicine 152 (2023): 106310.

[14] J. Liu, K. Xu, C. Zhao, et al., “Experimental and Finite Element Analysis Studies of a Reduction-Force Reducing Traction Method for Pelvic Fracture Surgeries,” Medicine in Novel Technology and Devices 13 (2022): 100101.

[15] K. A. Lefaivre, A. J. Starr, and C. M. Reinert, “Reduction of Displaced Pelvic Ring Disruptions Using a Pelvic Reduction Frame,” Journal of Orthopaedic Trauma 23, no. 4 (2009): 299–308.

[16] J. O. Anglen, “Pelvic Reduction Frame Facilitating Percutaneous Fixation to Pelvic Fractures,” Orthopaedic Surgery 15, no. 5 (2023): 1431–1433.

[17] X. Chen, J. Lei, S. Cai, and Y. Peng, “Design and Simulation Verification of Clamping Instrument With Active Variable Stiffness for Pelvic Fracture Reduction,” International Journal of Medical Robotics 19, no. 2 (2023): e2473.

[18] Y. Ge, C. Zhao, Y. Wang, and X. Wu, “Robot-Assisted Autonomous Reduction of a Displaced Pelvic Fracture: A Case Report and Brief Literature Review,” Journal of Clinical Medicine 11, no. 6 (2022): 1598.

[19] C. Zhao, Q. Cao, X. Sun, X. Wu, G. Zhu, and Y. Wang, “Intelligent Robot-Assisted Minimally Invasive Reduction System for Reduction of Unstable Pelvic Fractures,” Injury 54, no. 2 (2023): 604–614.

[20] Z. J. Liu, Y. Gu, and J. Jia, “The Kocher-Langenbeck Approach Combined With Robot-Aided Percutaneous Anterior Column Screw Fixation for Transverse-Oriented Acetabular Fractures: A Retrospective Study,” BMC Musculoskeletal Disorders 23, no. 1 (2022): 345.

[21] J. B. Carlson, J. Zou, and B. Hartley, “Placement of LC-II and Trans-Sacral Screws Using a Robotic Arm in a Simulated Bone Model in the Supine Position – A Feasibility Study,” Journal of Experimental Orthopaedics 9, no. 1 (2022): 36.

[22] Y. Jing, L. Chang, B. Cong, et al., “Preoperative 3D Printing Planning Technology Combined With Orthopedic Surgical Robot-Assisted Minimally Invasive Screw Fixation for the Treatment of Pelvic Fractures: A Retrospective Study,” PeerJ 12 (2024): e18632.

[23] K. Kabir, F. C. von Rundstedt, J. Roos, and M. Gathen, “Robotic-Assisted Plate Fixation of the Anterior Acetabulum - Clinical Description of a New Technique,” Journal of Orthopaedic Surgery and Research 19, no. 1 (2024): 253.

[24] Z. Wu, Y. Dai, and Y. Zeng, “Intelligent Robot-Assisted Fracture Reduction System for the Treatment of Unstable Pelvic Fractures,” Journal of Orthopaedic Surgery and Research 19, no. 1 (2024): 271.

[25] H. S. Liu, S. J. Duan, F. Z. Xin, Z. Zhang, X. G. Wang, and S. D. Liu, “Robot-Assisted Minimally-Invasive Internal Fixation of Pelvic Ring Injuries: A Single-Center Experience,” Orthopaedic Surgery 11, no. 1 (2019): 42–51.

[26] Y. Zhao, P. Cui, Z. Xiong, J. Zheng, and D. Xing, “A Novel Biplanar Positioning Technique to Guide Iliosacral Screw Insertion: A Retrospective Study,” BMC Musculoskeletal Disorders 24, no. 1 (2023): 374.

[27] H. S. Liu, S. J. Duan, S. D. Liu, F. S. Jia, L. M. Zhu, and M. C. Liu, “Robot-Assisted Percutaneous Screw Placement Combined With Pelvic Internal Fixator for Minimally Invasive Treatment of Unstable Pelvic Ring Fractures,” International Journal of Medical Robotics and Computer Assisted Surgery 14, no. 5 (2018): e1927.

[28] S. Gilani, M. Mohamed, B. Hartley, et al., “The Use of a Robotic Arm for Fixation of Pelvic Fractures,” Journal of Orthopaedic Trauma 37, no. 11 (2023): S28–S32.

[29] B. Xing, X. Shen, L. Ma, and X. Qi, “TiRobot-Assisted Percutaneous Cannulated Screw Fixation for Elderly Patients With Fragility Fractures of the Pelvis: A Retrospective Study,” Orthopaedic Surgery 16, no. 3 (2024): 662–674.

[30] N. Li, Z. Zhu, C. Xiao, et al., “The Efficacy of “TiRobot” Orthopaedic Robot-Assisted VS Conventional Fluoroscopic Percutaneous Screw Fixation of the Sacroiliac Joint,” International Orthopaedics 47, no. 2 (2023): 351–358.

[31] W. Han, T. Zhang, Y. G. Su, et al., “Percutaneous Robot-Assisted Versus Freehand S2 Iliosacral Screw Fixation in Unstable Posterior Pelvic Ring Fracture,” Orthopedic Surgery 14, no. 2 (2022): 221–228.

[32] T. Long, K. N. Li, J. H. Gao, et al., “Comparative Study of Percutaneous Sacroiliac Screw With or Without TiRobot Assistance for Treating Pelvic Posterior Ring Fractures,” Orthopaedic Surgery 11, no. 3 (2019): 386–396.

[33] P. Messmer, T. Gross, N. Suhm, P. Regazzoni, A. L. Jacob, and R. W. Huegli, “Modality-Based Navigation,” Injury 35, no. S1 (2004): S-A24–S-A29.

[34] R. Rambani and M. Varghese, “Computer Assisted Navigation in Orthopaedics and Trauma Surgery,” Orthopaedics and Traumatology 28, no. 1 (2014): 50–57.

[35] M. Liebergall, R. Mosheiff, and D. Segal, “Navigation in Orthopaedic Trauma,” Operative Techniques in Orthopaedics 13, no. 2 (2003): 64–72.

[36] R. E. Rosenberger, B. Dolati, R. Larndorfer, M. Blauth, D. Krappinger, and R. J. Bale, “Accuracy of Minimally Invasive Navigated Acetabular and Iliosacral Fracture Stabilization Using a Targeting and Noninvasive Registration Device,” Archives of Orthopaedic and Trauma Surgery 130, no. 2 (2010): 223–230.

[37] W. Lehmann, J. M. Rueger, J. Nuechtern, L. Grossterlinden, M. Kammal, and M. Hoffmann, “A Novel Electromagnetic Navigation Tool for Acetabular Surgery,” Injury 46, no. S4 (2015): S71–S74.

[38] M. Pishnamaz, C. Wilkmann, H. S. Na, et al., “Electromagnetic Real Time Navigation in the Region of the Posterior Pelvic Ring: An Experimental In-Vitro Feasibility Study and Comparison of Image Guided Techniques,” PLoS One 11, no. 2 (2016): e0148199.

[39] J. Li, L. Qi, N. Liu, et al., “A New Technology Using Mixed Reality Surgical Navigation With the Unlocking Closed Reduction Technique Frame to Assist Pelvic Fracture Reduction and Fixation: Technical Note,” Orthopedic Surgery 15, no. 12 (2023): 3317–3325.

[40] R. Han, A. Uneri, R. C. Vijayan, et al., “Fracture Reduction Planning and Guidance in Orthopaedic Trauma Surgery via Multi-Body Image Registration,” Medical Image Analysis 68 (2021): 101917.

[41] J. M. L. Wong, S. Bewsher, J. Yew, A. Bucknill, and R. de Steiger, “Fluoroscopically Assisted Computer Navigation Enables Accurate Percutaneous Screw Placement for Pelvic and Acetabular Fracture Fixation,” Injury 46, no. 6 (2015): 1064–1068.

[42] M. Takao, T. Nishii, T. Sakai, H. Yoshikawa, and N. Sugano, “Iliosacral Screw Insertion Using CT-3D-Fluoroscopy Matching Navigation,” Injury 45, no. 6 (2014): 988–994.

[43] G. Guerin, N. Laghmouche, P. E. Moreau, P. Upex, P. Jouffroy, and G. Riouallon, “Iliosacral Screwing Under Navigation Control: Technical Note,” Orthopaedics & Traumatology, Surgery & Research 106, no. 5 (2020): 877–880.

[44] B. C. Link, R. A. Haveman, B. J. M. de Van Wall, et al., “Percutaneous Sacroiliac Screw Fixation With a 3D Robot-Assisted Image-Guided Navigation System: Technical Solutions,” Operative Orthopadie Und Traumatologie 37, no. 1 (2025): 3–13.

[45] N. Sheth, P. Vagdargi, A. Sisniega, A. Uneri, G. Osgood, and J. H. Siewerdsen, “Preclinical Evaluation of a Prototype Freehand Drill Video Guidance System for Orthopedic Surgery,” Journal of Medical Imaging 9, no. 4 (2022): 045004.

[46] A. L. Jacob, N. Suhm, A. Kaim, P. Regazzoni, W. Steinbrich, and P. Messmer, “Coronal Acetabular Fractures: The Anterior Approach in Computed Tomography-Navigated Minimally Invasive Percutaneous Fixation,” Cardiovascular and Interventional Radiology 23, no. 5 (2000): 327–331.

[47] Z. Ruan, C. F. Luo, B. F. Zeng, and C. Q. Zhang, “Percutaneous Screw Fixation for the Acetabular Fracture With Quadrilateral Plate Involved by Three-Dimensional Fluoroscopy Navigation: Surgical Technique,” Injury 43, no. 4 (2012): 517–521.

[48] A. Sebaaly, G. Riouallon, M. Zaraa, and P. Jouffroy, “The Added Value of Intraoperative CT Scanner and Screw Navigation in Displaced Posterior Wall Acetabular Fracture With Articular Impaction,” Orthopaedics & Traumatology, Surgery & Research 102, no. 7 (2016): 947–950.

[49] M. Florio, L. Capasso, A. Olivi, C. Vitiello, A. Leone, and F. Liuzza, “3D - Navigated Percutaneous Screw Fixation of Pelvic Ring Injuries—A Pilot Study,” Injury 51, no. S3 (2020): S28–S33.

[50] A. Q. A. Teo, J. H. Yik, S. N. Jin Keat, D. P. Murphy, and G. K. O'Neill, “Accuracy of Sacroiliac Screw Placement With and Without Intraoperative Navigation and Clinical Application of the Sacral Dysmorphism Score,” Injury 49, no. 7 (2018): 1302–1306.

[51] W. D. Mu, H. Wang, D. S. Zhou, L. Z. Yu, T. H. Jia, and L. X. Li, “Computer Navigated Percutaneous Screw Fixation for Traumatic Pubic Symphysis Diastasis of Unstable Pelvic Ring Injuries,” Chinese Medical Journal 122, no. 14 (2009): 1699–1703.

[52] R. Madeja, J. Pometlová, P. Osemlak, et al., “Comparison of Fluoroscopy and Fluoroscopy-Based 2D Computer Navigation for Iliosacral Screw Placement: A Retrospective Study,” European Journal of Trauma and Emergency Surgery 48, no. 6 (2022): 4897–4902.

[53] J. Zwingmann, N. P. Südkamp, B. König, et al., “Intra- and Postoperative Complications of Navigated and Conventional Techniques in Percutaneous Iliosacral Screw Fixation After Pelvic Fractures: Results From the German Pelvic Trauma Registry,” Injury 44, no. 12 (2013): 1765–1772.

[54] K. T. Peng, Y. Y. Li, W. H. Hsu, et al., “Intraoperative Computed Tomography With Integrated Navigation in Percutaneous Iliosacral Screwing,” Injury 44, no. 2 (2013): 203–208.

[55] G. Ciolli, D. Caviglia, C. Vitiello, et al., “Navigated Percutaneous Screw Fixation of the Pelvis With o-Arm 2: Two Years' Experience,” Medicinski Glasnik 18, no. 1 (2021): 1–7.

[56] M. Boudissa, D. Carmagnac, G. Kerschbaumer, S. Ruatti, and J. Tonetti, “Screw Misplacement in Percutaneous Posterior Pelvic Iliosacral Screwing With and Without Navigation: A Prospective Clinical Study of 174 Screws in 127 Patients,” Orthopaedics & Traumatology, Surgery & Research 108, no. 2 (2022): 103213.

[57] J. S. Y. Wong, J. C. K. Lau, K. H. Chui, K. L. Tiu, K. B. Lee, and W. Li, “Three-Dimensional-Guided Navigation Percutaneous Screw Fixation of Fragility Fractures of the Pelvis,” Journal of Orthopaedic Surgery (Hong Kong) 27, no. 1 (2019): 2309499019833897.

[58] B. G. Ochs, C. Gonser, T. Shiozawa, et al., “Computer-Assisted Periacetabular Screw Placement: Comparison of Different Fluoroscopy-Based Navigation Procedures With Conventional Technique,” Injury 41, no. 12 (2010): 1297–1305.

[59] P. H. Richter, A. Blidon, A. Eickhoff, F. Gebhard, and K. Schuetze, “Accuracy of Screw Stabilization of the Dorsal Pelvic Ring Using a Hybrid Operating Room: 5 Year Experience in a Level 1 Trauma Center,” Injury 52, no. 10 (2021): 2968–2972.

[60] M. Takaesu, S. Nakasone, Y. Miyata, and K. Nishida, “Real-Time Three-Dimensional Fluoroscopy-Navigated Percutaneous Pelvic Screw Placement for Fragility Fractures of the Pelvis in the Hybrid Operating Room,” BMC Musculoskeletal Disorders 23, no. 1 (2022): 1057.

[61] J. He, G. Tan, D. Zhou, et al., “Comparison of Isocentric C-Arm 3-Dimensional Navigation and Conventional Fluoroscopy for Percutaneous Retrograde Screwing for Anterior Column Fracture of Acetabulum: An Observational Study,” Medicine (Baltimore) 95, no. 2 (2016): e2470.

[62] G. Hong, L. Cong-Feng, H. Cheng-Fang, Z. Chang-Qing, and Z. Bing-Fang, “Percutaneous Screw Fixation of Acetabular Fractures With 2D Fluoroscopy-Based Computerized Navigation,” Archives of Orthopaedic and Trauma Surgery 130, no. 9 (2010): 1177–1183.

[63] Y. C. Lin, C. H. Chen, H. T. Huang, et al., “Percutaneous Antegrade Screwing for Anterior Column Fracture of Acetabulum With Fluoroscopic-Based Computerized Navigation,” Archives of Orthopaedic and Trauma Surgery 128, no. 2 (2008): 223–226.

[64] M. S. Ead, K. K. Duke, J. L. Jaremko, and L. Westover, “Investigation of Pelvic Symmetry Using CAD Software,” Medical & Biological Engineering & Computing 58, no. 1 (2020): 75–82.

[65] B. Zeng, H. Wang, X. Tao, H. Shi, L. Joskowicz, and X. Chen, “A Bidirectional Framework for Fracture Simulation and Deformation-Based Restoration Prediction in Pelvic Fracture Surgical Planning,” Medical Image Analysis 97 (2024): 103267.

[66] J. Fornaro, M. Keel, M. Harders, B. Marincek, G. Székely, and T. Frauenfelder, “An Interactive Surgical Planning Tool for Acetabular Fractures: Initial Results,” Journal of Orthopaedic Surgery and Research 5 (2010): 50.

[67] M. Boudissa, H. Oliveri, M. Chabanas, and J. Tonetti, “Computer-Assisted Surgery in Acetabular Fractures: Virtual Reduction of Acetabular Fracture Using the First Patient-Specific Biomechanical Model Simulator,” Orthopaedics & Traumatology, Surgery & Research 104, no. 3 (2018): 359–362.

[68] M. Boudissa, G. Bahl, H. Oliveri, M. Chabanas, and J. Tonetti, “Virtual Preoperative Planning of Acetabular Fractures Using Patient-Specific Biomechanical Simulation: A Case-Control Study,” Orthopaedics & Traumatology, Surgery & Research 107, no. 6 (2021): 103004.

[69] M. Boudissa, B. Sauzeat, B. Noblet, J. Tonetti, and M. Chabanas, “Simulation Software to Plan the Treatment of Acetabular Fractures: The Patient-Specific Biomechanical Model,” Journal of Orthopaedic Trauma 37, no. 11S (2023): S18–S22.

[70] B. Liang, Q. Chen, S. Liu, et al., “A Feasibility Study of Individual 3D-Printed Navigation Template for the Deep External Fixator Pin Position on the Iliac Crest,” BMC Musculoskeletal Disorders 21, no. 1 (2020): 478.

[71] F. Yang, S. Yao, K. F. Chen, et al., “A Novel Patient-Specific Three-Dimensional-Printed External Template to Guide Iliosacral Screw Insertion: A Retrospective Study,” BMC Musculoskeletal Disorders 19, no. 1 (2018): 397.

[72] B. J. Merema, J. Kraeima, K. Ten Duis, et al., “The Design, Production and Clinical Application of 3D Patient-Specific Implants With Drilling Guides for Acetabular Surgery,” Injury 48, no. 11 (2017): 2540–2547.

[73] G. Agarwal, A. Mishra, T. Verma, R. Kumar, A. Meena, and L. Maini, “Virtual Planning on Contralateral Hemipelvis for Posteriorly Fixed Acetabular Fractures,” European Journal of Trauma and Emergency Surgery 48, no. 2 (2022): 1255–1261.

[74] F. Shen, B. Chen, Q. Guo, Y. Qi, and Y. Shen, “Augmented Reality Patient-Specific Reconstruction Plate Design for Pelvic and Acetabular Fracture Surgery,” International Journal of Computer Assisted Radiology and Surgery 8, no. 2 (2013): 169–179.

[75] L. Maini, A. Sharma, S. Jha, A. Sharma, and A. Tiwari, “Three-Dimensional Printing and Patient-Specific Pre-Contoured Plate: Future of Acetabulum Fracture Fixation?,” European Journal of Trauma and Emergency Surgery 44, no. 2 (2018): 215–224.

[76] S. Y. Sakong, J. W. Cho, B. S. Kim, S. J. Park, E. J. Lim, and J. K. Oh, “The Clinical Efficacy of Contouring Periarticular Plates on a 3D Printed Bone Model,” Journal of Personalized Medicine 13, no. 7 (2023): 1145.

[77] Y. T. Li, C. C. Hung, Y. C. Chou, et al., “Surgical Treatment for Posterior Dislocation of Hip Combined With Acetabular Fractures Using Preoperative Virtual Simulation and Three-Dimensional Printing Model-Assisted Precontoured Plate Fixation Techniques,” BioMed Research International 2019 (2019): 3971571.

[78] F. F. A. IJpma, A. M. L. Meesters, B. B. J. Merema, et al., “Feasibility of Imaging-Based 3-Dimensional Models to Design Patient-Specific Osteosynthesis Plates and Drilling Guides,” JAMA Network Open 4, no. 2 (2021): e2037519.

[79] F. Chana-Rodríguez, R. P. Mañanes, J. Rojo-Manaute, P. Gil, J. M. Martínez-Gómiz, and J. Vaquero-Martín, “3D Surgical Printing and Pre Contoured Plates for Acetabular Fractures,” Injury 47, no. 11 (2016): 2507–2511.

[80] F. Chana Rodríguez, R. Pérez Mañanes, F. J. Narbona Cárceles, and P. Gil Martínez, “3D Printing Utility for Surgical Treatment of Acetabular Fractures,” Revista Española de Cirugía Ortopédica y Traumatología (English Edition) 62, no. 4 (2018): 231–239.

[81] P. Upex, P. Jouffroy, and G. Riouallon, “Application of 3D Printing for Treating Fractures of Both Columns of the Acetabulum: Benefit of Pre-Contouring Plates on the Mirrored Healthy Pelvis,” Orthopaedics & Traumatology, Surgery & Research: OTSR 103, no. 3 (2017): 331–334.

[82] R. Zou, M. Wu, J. Guan, Y. Xiao, and X. Chen, “Therapeutic Effect of Acetabular Fractures Using the Pararectus Approach Combined With 3D Printing Technique,” Orthopaedic Surgery 12, no. 6 (2020): 1854–1858.

[83] C. Zeng, J. Xiao, Z. Wu, and W. Huang, “Evaluation of Three-Dimensional Printing for Internal Fixation of Unstable Pelvic Fracture From Minimal Invasive Para-Rectus Abdominis Approach: A Preliminary Report,” International Journal of Clinical and Experimental Medicine 8, no. 8 (2015): 13039–13044.

[84] C. Zeng, W. Xing, Z. Wu, H. Huang, and W. Huang, “A Combination of Three-Dimensional Printing and Computer-Assisted Virtual Surgical Procedure for Preoperative Planning of Acetabular Fracture Reduction,” Injury 47, no. 10 (2016): 2223–2227.

[85] L. Maini, A. Mishra, G. Agarwal, T. Verma, A. Sharma, and A. Tyagi, “3D Printing in Designing of Anatomical Posterior Column Plate,” Journal of Clinical Orthopaedics & Trauma 9, no. 3 (2018): 236–240.

[86] M. Tomaževič, A. Kristan, A. F. Kamath, and M. Cimerman, “3D Printing of Implants for Patient-Specific Acetabular Fracture Fixation: An Experimental Study,” European Journal of Trauma and Emergency Surgery 47, no. 5 (2021): 1297–1305.

[87] D. Wang, Y. Wang, S. Wu, et al., “Customized a Ti6Al4V Bone Plate for Complex Pelvic Fracture by Selective Laser Melting,” Materials (Basel) 10, no. 1 (2017): 35.

[88] D. L. Robinson, A. Bucknill, A. Ferragina, C. Campbell, and P. V. S. Lee, “Fixation of Pelvic Acetabular Fractures Using 3D-Printed Fracture Plates: A Cadaver Study,” Journal of Orthopaedic Surgery and Research 18, no. 1 (2023): 360.

[89] W. L. Jo, Y. G. Chung, S. H. Shin, J. H. Lim, M. S. Kim, and D. K. Yoon, “Structural Analysis of Customized 3D Printed Plate for Pelvic Bone by Comparison With Conventional Plate Based on Bending Process,” Scientific Reports 13, no. 1 (2023): 10542.

[90] X. Wen, H. Huang, C. Wang, et al., “Comparative Biomechanical Testing of Customized Three-Dimensional Printing Acetabular-Wing Plates for Complex Acetabular Fractures,” Advances in Clinical and Experimental Medicine 29, no. 4 (2020): 459–468.

[91] L. Cai, Y. Zhang, C. Chen, Y. Lou, X. Guo, and J. Wang, “3D Printing-Based Minimally Invasive Cannulated Screw Treatment of Unstable Pelvic Fracture,” Journal of Orthopaedic Surgery and Research 13, no. 1 (2018): 71.

[92] C. Wu, D. Shen, J. Deng, et al., “Navigation Template Design and the Anatomic Measurement for Anterograde Transpubic Screws,” Orthopedic Surgery 14, no. 12 (2022): 3408–3416.

[93] F. Liu, J. Yu, H. Yang, et al., “Iliosacral Screw Fixation of Pelvic Ring Disruption With Tridimensional Patient-Specific Template Guidance,” Orthopaedics & Traumatology, Surgery & Research: OTSR 108, no. 2 (2022): 103210.

[94] C. Wu, J. Y. Deng, T. Li, L. Tan, and D. C. Yuan, “Combined 3D Printed Template to Guide Iliosacral Screw Insertion for Sacral Fracture and Dislocation: A Retrospective Analysis,” Orthopaedic Surgery 12, no. 1 (2020): 241–247.

[95] X. Chen, X. Chen, G. Zhang, et al., “Accurate Fixation of Plates and Screws for the Treatment of Acetabular Fractures Using 3D-Printed Guiding Templates: An Experimental Study,” Injury 48, no. 6 (2017): 1147–1154.

[96] X. Tao, F. Lyu, K. Sugand, K. Zhou, and H. Wang, “Does a Novel 3D Printed Individualized Guiding Template Based on Cutaneous Fiducial Markers Contribute to Accurate Percutaneous Insertion of Pelvic Screws? A Preliminary Phantom and Cadaver Study,” BMC Surgery 24, no. 1 (2024): 105.

[97] M. Wang, H. Luo, W. Chu, and M. L. Bangura, “3D Printing and Development of Optimized and Accurate, Personalized Surgical Plans for Complex Pelvic and Acetabular Fractures,” Alternative Therapies in Health and Medicine (2024): AT10002.

[98] S. Weidert, S. Andress, C. Linhart, et al., “3D Printing Method for Next-Day Acetabular Fracture Surgery Using a Surface Filtering Pipeline: Feasibility and 1-Year Clinical Results,” International Journal of Computer Assisted Radiology and Surgery 15, no. 3 (2020): 565–575.

[99] K. Chen, F. Yang, S. Yao, et al., “Application of Computer-Assisted Virtual Surgical Procedures and Three-Dimensional Printing of Patient-Specific Pre-Contoured Plates in Bicolumnar Acetabular Fracture Fixation,” Orthopaedics & Traumatology, Surgery & Research 105, no. 5 (2019): 877–884.

[100] L. Wan, X. Zhang, S. Zhang, et al., “Clinical Feasibility and Application Value of Computer Virtual Reduction Combined With 3D Printing Technique in Complex Acetabular Fractures,” Experimental and Therapeutic Medicine 17, no. 5 (2019): 3630–3636.

[101] S. Ivanov, P. Valchanov, S. Hristov, D. Veselinov, and B. Gueorguiev, “Management of Complex Acetabular Fractures by Using 3D Printed Models,” Medicina (Kaunas, Lithuania) 58, no. 12 (2022): 1854.

[102] S. Ansari, S. Barik, S. K. Singh, B. Sarkar, T. Goyal, and R. B. Kalia, “Role of 3D Printing in the Management of Complex Acetabular Fractures: A Comparative Study,” European Journal of Trauma and Emergency Surgery 47, no. 5 (2021): 1291–1296.

[103] J. H. Huang, H. Liao, X. Y. Tan, et al., “Surgical Treatment for Both-Column Acetabular Fractures Using Pre-Operative Virtual Simulation and Three-Dimensional Printing Techniques,” Chinese Medical Journal (English Edition) 133, no. 4 (2020): 395–401.

[104] V. Moorthy, I. T. H. Chua, S. E. Tan, A. Pillai, B. Y. Tan, and M. G. J. Yam, “Impact of Introducing 3D Printing-Assisted Surgery Into Clinical Practice for Traumatic Pelvic and Acetabular Fractures,” Journal of Orthopaedics 57 (2024): 60–64.

[105] C. Yu, W. Yu, S. Mao, et al., “Traditional Three-Dimensional Printing Technology Versus Three-Dimensional Printing Mirror Model Technology in the Treatment of Isolated Acetabular Fractures: A Retrospective Analysis,” Journal of International Medical Research 48, no. 5 (2020): 300060520924250.

[106] K. Xiao, B. Xu, L. Ding, et al., “Traditional Versus Mirror Three-Dimensional Printing Technology for Isolated Acetabular Fractures: A Retrospective Study With a Median Follow-Up of 25 Months,” Journal of International Medical Research 49, no. 6 (2021): 3000605211028554.

[107] J. Chen, Y. Zheng, W. Zhou, et al., “Three-Dimensional Printed Plate Template Versus Hemipelvis Model in Patient-Specific Plate Preparation for Posterior Wall Acetabular Fractures,” Orthopedic Surgery 15, no. 9 (2023): 2383–2392.

[108] C. Wang, Y. Chen, L. Wang, et al., “Three-Dimensional Printing of Patient-Specific Plates for the Treatment of Acetabular Fractures Involving Quadrilateral Plate Disruption,” BMC Musculoskeletal Disorders 21, no. 1 (2020): 451.

[109] C. C. Hung, P. H. Shen, J. L. Wu, et al., “Association Between 3D Printing-Assisted Pelvic or Acetabular Fracture Surgery and the Length of Hospital Stay in Nongeriatric Male Adults,” Journal of Personalized Medicine 12, no. 4 (2022): 573.

[110] C. C. Hung, J. L. Wu, Y. W. Cheng, W. L. Chen, S. H. Lee, and T. T. Yeh, “Does 3D Printing-Assisted Acetabular or Pelvic Fracture Surgery Shorten Hospitalization Durations Among Older Adults?,” Journal of Personalized Medicine 12, no. 2 (2022): 189.

[111] M. S. Ead, M. Palizi, J. L. Jaremko, L. Westover, and K. K. Duke, “Development and Application of the Average Pelvic Shape in Virtual Pelvic Fracture Reconstruction,” International Journal of Medical Robotics 17, no. 2 (2021): e2199.

RIGHTS & PERMISSIONS

2026 The Author(s). Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.