Clinical Study and Finite Element Analysis on the Effects of Pseudo-Patella Baja After TKA

Abstract

Objective: Pseudo-patella baja (PPB) was one of the complications after total knee arthroplasty (TKA). This complication may be closely related to the occurrence of knee joint movement limitation and pain after TKA. This study aimed to investigate whether PPB affects clinical outcomes after TKA and to study the biomechanical effects of PPB after TKA.

Methods: This study was a retrospective case series of 462 eligible patients (563 knees). Clinical evaluation was performed using the visual analogue scale (VAS), the Hospital for Special Surgery (HSS), the Western Ontario McMaster University Osteoarthritis Index (WOMAC) scoring systems, the 5-Level EuroQol Generic Health Index (EQ-5D-5L), the Forgotten Joint Score-12 (FJS-12), and patient satisfaction. CT and MRI scans of two healthy left knees and TKA prostheses were taken; 3D models including PPB, True patella baja (TPB), normal patella, and patella alta (PA) were created in FEA and applied load along the direction of quadriceps femoris. T-test, Mann–Whitney U-test, chi-squared (χ ²) test, and analysis of variance (ANOVA) were performed using GraphPad Prism (Version 8, GraphPad Software, USA). A statistically significant difference was considered at p < 0.05 with bilateral α.

Results: The VAS, HSS, WOMAC, EQ-5D-5L, FJS-12, and patient satisfaction scores in the PPB and TPB groups were significantly worse than those in the patella normal (PN) group (p < 0.05). The PPB group found a positive correlation between Blackburne–Peel index (BPI) and FJS-12 score. PPB showed lower contact stress of patellofemoral joint compared to TPB when knee flexion was less than < 90° (p < 0.01), but no significant difference when flexion was more than > 90° (p > 0.05) in the finite element model with Patella baja (PB). The contact area of the patellofemoral joint tended to increase with the deepening of knee flexion, and decreased after reaching the peak value. The contact area of the patellofemoral joint tended to decrease with the increase in patellar height. There was no significant difference in the contact area of the patellofemoral joint among different patellar heights and different degrees of knee flexion (p > 0.05).

Conclusion: PPB after TKA may increase patellofemoral joint stress and postoperative complications like anterior knee pain.

Keywords

biomechanics / finite element analysis / joint line / patellofemoral joint / pseudo-patella Baja / total knee arthroplasty

References

[1] M. Khan, K. Osman, G. Green, and F. S. Haddad, “The Epidemiology of Failure in Total Knee Arthroplasty: Avoiding Your Next Revision, supplement,” Bone & Joint Journal 98-b (SA) (2016): 105–112,

[2] J. G. Seo, Y. W. Moon, S. M. Kim, et al., “Prevention of Pseudo-Patella Baja During Total Knee Arthroplasty,” Knee Surgery, Sports Traumatology, Arthroscopy: Official Journal of the ESSKA 23, no. 12 (2015): 3601–3606,

[3] S. M. Kazemi, L. Daftari Besheli, A. Eajazi, et al., “Pseudo-Patella Baja After Total Knee Arthroplasty,” Medical Science Monitor: International Medical Journal of Experimental and Clinical Research 17, no. 5 (2011): CR292–CR296,

[4] Z. C. Lum, A. M. Saiz, G. C. Pereira, and J. P. Meehan, “Patella Baja in Total Knee Arthroplasty,” Journal of the American Academy of Orthopaedic Surgeons 28, no. 8 (2020): 316–323,

[5] J. L. Prudhon, J. H. Caton, T. Aslanian, and R. Verdier, “How Is Patella Height Modified After Total Knee Arthroplasty?,” International Orthopaedics 42, no. 2 (2018): 311–316,

[6] A. J. Fox, F. Wanivenhaus, and S. A. Rodeo, “The Basic Science of the Patella: Structure, Composition, and Function,” Journal of Knee Surgery 25, no. 2 (2012): 127–141,

[7] D. J. Chonko, A. V. Lombardi, Jr., and K. R. Berend, “Patella Baja and Total Knee Arthroplasty (TKA): Etiology, Diagnosis, and Management,” Surgical Technology International 12 (2004): 231–238.

[8] M. Flören, J. Davis, M. G. Peterson, and R. S. Laskin, “A Mini-Midvastus Capsular Approach With Patellar Displacement Decreases the Prevalence of Patella Baja,” Journal of Arthroplasty 22 (2007): 51–57.

[9] A. Aguirre-Pastor, D. J. Ortolá, A. Lizaur-Utrilla, M. A. Rosa, and F. A. Lopez-Prats, “Is Pseudo-Patella Baja Really a Serious Complication of Total Knee Arthroplasty?,” Journal of Arthroplasty 35, no. 2 (2020): 557–562,

[10] R. Gaillard, C. Bankhead, N. Budhiparama, C. Batailler, E. Servien, and S. Lustig, “Influence of Patella Height on Total Knee Arthroplasty: Outcomes and Survival,” Journal of Arthroplasty 34, no. 3 (2019): 469–477,

[11] S. Fornalski, M. H. McGarry, C. N. Bui, W. C. Kim, and T. Q. Lee, “Biomechanical Effects of Joint Line Elevation in Total Knee Arthroplasty,” Clinical Biomechanics (Bristol, Avon) 27, no. 8 (2012): 824–829,

[12] J. S. Yang, J. P. Fulkerson, E. Obopilwe, et al., “Patellofemoral Contact Pressures After Patellar Distalization: A Biomechanical Study,” Arthroscopy 33, no. 11 (2017): 2038–2044,

[13] R. Popescu, E. G. Haritinian, and S. Cristea, “Relevance of Finite Element in Total Knee Arthroplasty—Literature Review,” Chirurgia (Bucur) 114, no. 4 (2019): 437–442,

[14] K.-T. Kang, J. Son, S. K. Kwon, O.-R. Kwon, J.-H. Park, and Y.-G. Koh, “Finite Element Analysis for the Biomechanical Effect of Tibial Insert Materials in Total Knee Arthroplasty,” Composite Structures 201 (2018): 141–150,

[15] G. Alotta, O. Barrera, and E. C. Pegg, “Viscoelastic Material Models for More Accurate Polyethylene Wear Estimation,” Journal of Strain Analysis for Engineering Design 53, no. 5 (2018): 302–312,

[16] B. K. Madeti and S. Rao, “Finite Element Analysis for Knee Implants With Suitable Material Combinations,” International Journal of Experimental and Computational Biomechanics 4, no. 2/3 (2018): 113.

[17] J. Insall and E. Salvati, “Patella Position in the Normal Knee Joint,” Radiology 101, no. 1 (1971): 101–104,

[18] J. S. Blackburne and T. E. Peel, “A New Method of Measuring Patellar Height,” Journal of Bone and Joint Surgery (British Volume) 59, no. 2 (1977): 241–242,

[19] J. Caton, G. Deschamps, P. Chambat, J. L. Lerat, and H. Dejour, “Patella infera. Apropos of 128 Cases,” Revue de Chirurgie Orthopédique et Réparatrice de l’Appareil Moteur 68, no. 5 (1982): 317–325.

[20] H. J. Lee, J. S. Lee, H. J. Jung, K. S. Song, J. J. Yang, and C. W. Park, “Comparison of Joint Line Position Changes After Primary Bilateral Total Knee Arthroplasty Performed Using the Navigation-Assisted Measured Gap Resection or Gap Balancing Techniques,” Knee Surgery, Sports Traumatology, Arthroscopy: Official Journal of the ESSKA 19, no. 12 (2011): 2027–2032,

[21] B. Xu, W. X. Xu, D. Lu, H. F. Sheng, X. W. Xu, and W. G. Ding, “Application of Different Patella Height Indices in Patients Undergoing Total Knee Arthroplasty,” Journal of Orthopaedic Surgery and Research 12, no. 1 (2017): 191,

[22] S. Babazadeh, M. M. Dowsey, J. D. Swan, J. D. Stoney, and P. F. Choong, “Joint Line Position Correlates With Function After Primary Total Knee Replacement: A Randomised Controlled Trial Comparing Conventional and Computer-Assisted Surgery,” Journal of Bone and Joint Surgery (British Volume) 93, no. 9 (2011): 1223–1231,

[23] C. M. Powers, Y. J. Chen, I. Scher, and T. Q. Lee, “The Influence of Patellofemoral Joint Contact Geometry on the Modeling of Three Dimensional Patellofemoral Joint Forces,” Journal of Biomechanics 39, no. 15 (2006): 2783–2791,

[24] A. J. Porteous, M. A. Hassaballa, and J. H. Newman, “Does the Joint Line Matter in Revision Total Knee Replacement?,” Journal of Bone and Joint Surgery (British Volume) 90, no. 7 (2008): 879–884,

[25] H. Shoji, M. Solomonow, S. Yoshino, R. D’Ambrosia, and E. Dabezies, “Factors Affecting Postoperative Flexion in Total Knee Arthroplasty,” Orthopedics 13, no. 6 (1990): 643–649.

[26] M. Tuncer, J. P. Cobb, U. N. Hansen, and A. A. Amis, “Validation of Multiple Subject-Specific Finite Element Models of Unicompartmental Knee Replacement,” Medical Engineering & Physics 35, no. 10 (2013): 1457–1464,

[27] Y. Nie, F. Pei, B. Shen, P. Kang, and Z. Li, “Importance of Maintaining the Basic Stress Pathway Above the Acetabular Dome During Acetabular Reconstruction,” Computer Methods in Biomechanics and Biomedical Engineering 19, no. 9 (2016): 977–984.

[28] E. F. Morgan, H. H. Bayraktar, and T. M. Keaveny, “Trabecular Bone Modulus Density Relationships Depend on Anatomic Site,” Journal of Biomechanical Engineering 36, no. 7 (2003): 897–904.

[29] J. Weiss, J. C. Gardiner, and C. Bonifasi-Lista, “Ligament Material Behavior Is Nonlinear, Viscoelastic and Rate-Independent Under Shear Loading,” Journal of Biomechanics 35 (2002): 943–950.

[30] J. Gardiner and J. Weiss, “Subject-Specific Finite Element Analysis of the Human Medial Collateral Ligament During Valgus Knee Loading,” Journal of Orthopaedic Research 21 (2003): 1098–1106.

[31] D. L. Butler, M. Sheh, D. Stouffer, V. Samaranayake, and M. Levy, “Surface Strain Variation in Human Patellar Tendon and Knee Cruciate Ligaments,” ASME Journal of Biomechanical Engineering 39 (1990): 38–45.

[32] A. A. Ali, C. W. Clary, L. M. Smoger, et al., “Computational Framework for Population-Based Evaluation of TKR-Implanted Patellofemoral Joint Mechanics,” Biomechanics and Modeling in Mechanobiology 19, no. 4 (2020): 1309–1317,

[33] C. K. Fitzpatrick, M. A. Baldwin, and P. J. Rullkoetter, “Computationally Efficient Finite Element Evaluation of Natural Patellofemoral Mechanics,” Journal of Biomechanical Engineering 132, no. 12 (2010): 121013,

[34] R. M. Meneghini, M. A. Ritter, J. L. Pierson, J. B. Meding, M. E. Berend, and P. M. Faris, “The Effect of the Insall-Salvati Ratio on Outcome After Total Knee Arthroplasty. supplement,” Journal of Arthroplasty 21, no. S2 (2006): 116–120,

[35] G. Bugelli, F. Ascione, N. Cazzella, et al., “Pseudo-Patella Baja: A Minor Yet Frequent Complication of Total Knee Arthroplasty,” Knee Surgery, Sports Traumatology, Arthroscopy: Official Journal of the ESSKA 26, no. 6 (2018): 1831–1837,

[36] H. Behrend, T. Graulich, R. Gerlach, C. Spross, and A. Ladurner, “Blackburne–Peel Ratio Predicts patients’ Outcomes After Total Knee Arthroplasty,” Knee Surgery, Sports Traumatology, Arthroscopy: Official Journal of the ESSKA 27, no. 5 (2019): 1562–1569,

[37] C. E. H Scott, N. D. Clement, L. Z. Yapp, D. J. MacDonald, J. T. Patton, and R. Burnett, “Association Between Femoral Component Sagittal Positioning and Anterior Knee Pain in Total Knee Arthroplasty: A 10-Year Case–Control Follow-Up Study of a Cruciate-Retaining Single-Radius Design,” Journal of Bone and Joint Surgery (American Volume) 101, no. 17 (2019): 1575–1585,

[38] A. H. van Houten, P. J. Heesterbeek, and A. B. Wymenga, “Patella Position Is Not a Determinant for Anterior Knee Pain 10 Years After Balanced Gap Total Knee Arthroplasty,” Knee Surgery, Sports Traumatology, Arthroscopy: Official Journal of the ESSKA 24, no. 8 (2016): 2656–2662,

[39] M. Etchebehere, P. P. Lin, B. S. Moon, J. Yu, L. Li, and V. O. Lewis, “Patellar Height Decreasing After Distal Femur Endoprosthesis Reconstruction Does Not Affect Functional Outcome,” Journal of Arthroplasty 31, no. 2 (2016): 442–445.

[40] Z. Bi, Y. Cai, C. Sun, X. Shi, S. Liao, and J. Liu, “Different Radiological Indices of Patellar Height Predict Patients’ Diverse Outcomes Following Total Knee Arthroplasty. Clin,” Orthopaedic Surgery 16 (2024): 741.

[41] J. W. Martin and L. A. Whiteside, “The Influence of Joint Line Position on Knee Stability After Condylar Knee Arthroplasty,” Clinical Orthopaedics and Related Research 259 (1990): 146–156.

[42] J. Ryu, S. Saito, K. Yamamoto, and S. Sano, “Factors Influencing the Postoperative Range of Motion in Total Knee Arthroplasty,” Bulletin Hospital for Joint Diseases (New York, NY) 53, no. 3 (1993): 35–40.

[43] T. F. Wyss, A. J. Schuster, P. Münger, D. Pfluger, and U. Wehrli, “Does Total Knee Joint Replacement With the Soft Tissue Balancing Surgical Technique Maintain the Natural Joint Line?,” Archives of Orthopaedic and Trauma Surgery 126, no. 7 (2006): 480–486,

[44] G. J. Emodi, J. J. Callaghan, D. R. Pedersen, and T. D. Brown, “Posterior Cruciate Ligament Function Following Total Knee Arthroplasty: The Effect of Joint Line Elevation,” Iowa Orthopaedic Journal 19 (1999): 82–92.

[45] H. E. Figgie, 3rd, V. M. Goldberg, K. G. Heiple, H. S. Moller, 3rd, and N. H. Gordon, “The Influence of Tibial-Patellofemoral Location on Function of the Knee in Patients With the Posterior Stabilized Condylar Knee Prosthesis,” Journal of Bone and Joint Surgery (American Volume) 68, no. 7 (1986): 1035–1040.

[46] T. Luyckx, K. Didden, H. Vandenneucker, L. Labey, B. Innocenti, and J. Bellemans, “Is There a Biomechanical Explanation for Anterior Knee Pain in Patients With Patella Alta?: Influence of Patellar Height on Patellofemoral Contact Force, Contact Area and Contact Pressure,” Journal of Bone and Joint Surgery (British Volume) 91, no. 3 (2009): 344–350,

[47] R. Singerman, D. T. Davy, and V. M. Goldberg, “Effects of Patella Alta and Patella infera on Patellofemoral Contact Forces,” Journal of Biomechanics 27, no. 8 (1994): 1059–1065,

[48] B. Innocenti, S. Pianigiani, L. Labey, J. Victor, and J. Bellemans, “Contact Forces in Several TKA Designs During Squatting: A Numerical Sensitivity Analysis,” Journal of Biomechanics 44, no. 8 (2011): 1573–1581,

[49] C. König, A. Sharenkov, G. Matziolis, et al., “Joint Line Elevation in Revision TKA Leads to Increased Patellofemoral Contact Forces,” Journal of Orthopaedic Research: Official Publication of the Orthopaedic Research Society 28, no. 1 (2010): 1–5,

[50] H. Tanikawa, M. Tada, K. Harato, K. Okuma, and T. Nagura, “Influence of Total Knee Arthroplasty on Patellar Kinematics and Patellofemoral Pressure,” Journal of Arthroplasty 32, no. 1 (2017): 280–285,

RIGHTS & PERMISSIONS

2024 The Author(s). Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.