3D-Printed Talus-Calcaneus Prosthesis in Treating Ewing’s Sarcoma: A Case Report

Abstract

Background: Malignant tumors originating in the talus are rare and present significant challenges in reconstruction. Traditional treatments, such as below-knee amputation or tbiocalcaneal fusion, often result in significant loss of ankle function. After tumor resection, reconstruction of the talus and calcaneus is necessary to preserve ankle function. However, the intricate anatomical structure and unique location of the talus and calcaneus present significant challenges for prosthetic reconstruction.

Case Presentation: Here, we present the case of an 11-year-old adolescent patient diagnosed with Ewing’s sarcoma of the talus, accompanied by suspected involvement of the calcaneus. Following a comprehensive evaluation, a 3D-printed talus-calcaneus prosthesis, which is composed of a ultrahigh-molecular weight polyethylene (UHMWPE) part and a titanium alloy part, was designed for talus and calcaneus reconstruction. In addition, a porous structure was designed to promote the integration of bone–prosthesis interface. The lesion was completely resected and the prosthesis was precisely installed. After 12 months follow-up, patients demonstrated favorable function results with the Musculoskeletal Tumor Society (MSTS) score was 27/30, and the American Orthopedic Foot and Ankle Society (AOFAS) score was 92/100. The range of motion for dorsiflexion, plantarflexion, inversion, and eversion of the right ankle joint was measured as 10° and 35°, 15°, and 10°, respectively. The postoperative radiograph showed a good position of the prosthesis. No narrowed joint space was observed. Tomosynthesis shimadzu metal artifact reduction technology (T-SMART) revealed that integration between bone and prosthesis was good.

Conclusion: In this case, we present a case of 3D-printed talus-calcaneal prosthesis reconstructing talus and calcaneus. Favorable postoperative function outcome and good integration of the interface were observed. Therefore, this case provides an alternative therapeutic option for the treatment invasive talus tumor accompanied by suspicious contamination of the calcaneus. Nevertheless, a larger cohort study and with longer follow-up is needed to evaluate the effectiveness and potential complications of this novel prosthesis.

Keywords

3D-printed / Ewing’s sarcoma / prosthetic replacement / talus-calcaneus

References

[1] M. U. Jawad, M. C. Cheung, E. S. Min, M. M. Schneiderbauer, L. G. Koniaris, and S. P. Scully, “Ewing Sarcoma Demonstrates Racial Disparities in Incidence-Related and Sex-Related Differences in Outcome: An Analysis of 1631 Cases From the SEER Database, 1973-2005,” Cancer 115 (2009): 3526–3536.

[2] C. Kimber, A. Michalski, L. Spitz, and A. Pierro, “Primitive Neuroectodermal Tumours: Anatomic Location, Extent of Surgery, and Outcome,” Journal of Pediatric Surgery 33 (1998): 39–41.

[3] A. C. Hesla, A. Discacciati, P. Tsagkozis, and K. E. Smedby, “Subsequent Primary Neoplasms Among Bone Sarcoma Survivors; Increased Risks Remain After 30 Years of Follow-Up and in the Latest Treatment Era, a Nationwide Population-Based Study,” British Journal of Cancer 122 (2020): 1242–1249.

[4] S. J. Cotterill, S. Ahrens, M. Paulussen, et al., “Prognostic Factors in Ewing’s Tumor of Bone: Analysis of 975 Patients From the European Intergroup Cooperative Ewing’s Sarcoma Study Group,” Journal of Clinical Oncology 18 (2000): 3108–3114.

[5] M. Paulussen, S. Ahrens, J. Dunst, et al., “Localized Ewing Tumor of Bone: Final Results of the Cooperative Ewing’s Sarcoma Study CESS 86,” Journal of Clinical Oncology 19 (2001): 1818–1829.

[6] H. E. Grier, M. D. Krailo, N. J. Tarbell, et al., “Addition of Ifosfamide and Etoposide to Standard Chemotherapy for Ewing’s Sarcoma and Primitive Neuroectodermal Tumor of Bone,” New England Journal of Medicine 348 (2003): 694–701.

[7] M. Bernstein, H. Kovar, M. Paulussen, et al., “Ewing’s Sarcoma Family of Tumors: Current Management,” Oncologist 11 (2006): 503–519.

[8] A. Toepfer, N. Harrasser, M. Recker, et al., “Distribution Patterns of Foot and Ankle Tumors: A University Tumor Institute Experience,” BMC Cancer 18 (2018): 735.

[9] G. D. Bos, R. J. Esther, and S. T. Woll, “Foot Tumors: Diagnosis and Treatment,” Journal of the American Academy of Orthopaedic Surgeons 10 (2002): 259–270.

[10] M. Dominkus, F. Abdolvahab, P. Funovics, J. Panotopoulos, and C. Toma, “Limb Salvage Surgery in Malignant Tumours of the Foot,” Orthopaedic Proceedings 92-B (2010): 601.

[11] H. L. Co and E. H. M. Wang, “Giant Cell Tumor of the Small Bones of the Foot,” Journal of Orthopaedic Surgery 26 (2018): 2309499018801168.

[12] K. Sakayama, T. Kidani, Y. Sugawara, et al., “Reconstruction Using a Frozen Bone Method for Osteosarcoma of the Talus. A Case Report and Review of the Literature,” Anticancer Research 29 (2009): 4093–4098.

[13] R. Capanna, C. Bufalini, and M. Campanacci, “A New Technique for Reconstructions of Large Metadiaphyseal Bone Defects,” Orthopedics and Traumatology 2 (1993): 159–177.

[14] J. Huang, F. Xie, X. Tan, W. Xing, Y. Zheng, and C. Zeng, “Treatment of Osteosarcoma of the Talus With a 3D-Printed Talar Prosthesis,” Journal of Foot and Ankle Surgery 60 (2021): 194–198.

[15] Y. Gan, K. Dai, J. Li, D. Shi, L. Shen, and W. Jiang, “Total Talar Replacement Using a Novel 3D-Printed Prosthesis for Recurrent Giant Cell Tumour of the Talus,” Journal of Shanghai Jiaotong University (Science) 26 (2021): 391–397.

[16] W. F. Enneking, W. Dunham, M. C. Gebhardt, M. Malawar, and D. J. Pritchard, “A System for the Functional Evaluation of Reconstructive Procedures After Surgical Treatment of Tumors of the Musculoskeletal System,” Clinical Orthopaedics and Related Research 286 (1993): 241–246.

[17] H. B. Kitaoka, I. J. Alexander, R. S. Adelaar, J. A. Nunley, M. S. Myerson, and M. Sanders, “Clinical Rating Systems for the Ankle-Hindfoot, Midfoot, Hallux, and Lesser Toes,” Foot & Ankle International 15 (1994): 349–353.

[18] T. G. P. Grünewald, F. Cidre-Aranaz, D. Surdez, et al., “Ewing Sarcoma,” Nature Reviews Disease Primers 4 (2018): 5.

[19] J. Choi, J. Yeo, M. J. Kim, D. Shin, and K. H. Cho, “Ewing’s Sarcoma of the Calcaneus: A Case Report,” Yeungnam University Journal of Medicine 21 (2004): 256.

[20] R. Biscaglia, A. Gasbarrini, T. Böhling, P. Bacchini, F. Bertoni, and P. Picci, “Osteosarcoma of the Bones of the Foot—An Easily Misdiagnosed Malignant Tumor,” Mayo Clinic Proceedings 73 (1998): 842–847.

[21] E. T. Newman, E. A. J. van Rein, N. Theyskens, et al., “Diagnoses, Treatment, and Oncologic Outcomes in Patients With Calcaneal Malignances: Case Series, Systematic Literature Review, and Pooled Cohort Analysis,” Journal of Surgical Oncology 122 (2020): 1731–1746.

[22] H. Katagiri, M. Takahashi, T. Takagi, and M. Nakagawa, “Osteosarcoma of the Talus Treated Successfully With Limb-Sparing Surgery. A Case Report,” Journal of Bone and Joint Surgery (American) 90 (2008): 869–874.

[23] J. Li and Z. Wang, “Surgical Treatment of Malignant Tumors of the Calcaneus,” Journal of the American Podiatric Medical Association 104 (2014): 71–76.

[24] X. Fang, H. Liu, Y. Xiong, et al., “Total Talar Replacement With a Novel 3D Printed Modular Prosthesis for Tumors,” Therapeutics and Clinical Risk Management 14 (2018): 1897–1905.

[25] T. Gong, M. Lu, J. Wang, et al., “3D-Printed Modular Endoprosthesis Reconstruction Following Total Calcanectomy in Calcaneal Malignancy,” Foot & Ankle International 44 (2023): 1021–1029.

[26] J. Imanishi and P. F. Choong, “Three-Dimensional Printed Calcaneal Prosthesis Following Total Calcanectomy,” International Journal of Surgery Case Reports 10 (2015): 83–87.

[27] M. Innocenti, E. Lucattelli, P. A. Daolio, et al., “Calcaneal Reconstruction After Total Calcanectomy With Iliac Crest Free Flap,” Microsurgery 39 (2019): 704–709.

[28] A. D’Arienzo, E. Ipponi, E. Ferrari, F. Campo, C. Rodolfo, and L. Andreani, “Hemicalcaneal Reconstruction With a 3D Printed Custom-Made Prosthesis After Partial Calcanectomy Due to a Malignant Bone Tumor,” Acta Bio-Medica: Atenei Parmensis 94 (2023): e2023012.

RIGHTS & PERMISSIONS

2024 The Author(s). Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.