Biomechanical Research of Three Parallel Cannulated Compression Screws in Oblique Triangle Configuration for Fixation of Femoral Neck Unstable Fractures

Abstract

Objective: Surgical treatment with internal fixation, specifically percutaneous fixation with three cannulated compression screws (CCSs), is the preferred choice for young and middle-aged patients. The mechanical advantage of the optimal spatial configuration with three screws provides maximum dispersion and cortical support. We suspect that the spatial proportion of the oblique triangle configuration (OTC) in the cross-section of the femoral neck isthmus (FNI) may significantly improve shear and fatigue resistance of the fixed structure, thereby stabilizing the internal fixation system in femoral neck fracture (FNF). This study aims to explore the mechanical features of OTC and provide a mechanical basis for its clinical application.

Methods: Twenty Sawbone femurs were prepared as Pauwels type III FNF models and divided equally into two fixation groups: OTC and inverted equilateral triangle configuration (IETC). Three 7.3 mm diameter cannulated compression screws (CCSs) were used for fixation. The specimens of FNF after screw internal fixation were subjected to static loading and cyclic loading tests, respectively, with five specimens for each test. Axial stiffness, 5 mm failure load, ultimate load, shear displacement, and frontal rotational angle of two fragments were evaluated. In the cyclic loading test, the load sizes were 700 N, 1400 N, and 2100 N, respectively, and the fracture end displacement was recorded. Results were presented as means ± SD. Data with normal distributions were compared by the Student's t test.

Results: In the static loading test, the axial stiffness, ultimate load, shear displacement, and frontal rotational angle of two fragments were (738.64 vs. 620.74) N/mm, (2957.61 vs. 2643.06) N, (4.67 vs. 5.39) mm, and (4.01 vs. 5.52)° (p < 0.05), respectively. Comparison between the femoral head displacement after 10,000 cycles of 700N cyclic loading and total displacement after 20,000 cycles of 700–1400N cyclic loading showed the OTC group was less than the IETC group (p < 0.05). A comparison of femoral head displacement after 10,000 cycles of 1400N and 2100N cycles and total displacement after 30,000 cycles of 700–2100N cycles showed the OTC group was less than another group, but the difference was not significant (p > 0.05).

Conclusion: When three CCSs are inserted in parallel to fix FNF, the OTC of three screws has obvious biomechanical advantages, especially in shear resistance and early postoperative weight-bearing, which provides a mechanical basis for clinical selection of ideal spatial configuration for unstable FNF.

Keywords

Biomechanics / Cannulated Compression Screw / Femoral Neck Fracture / Oblique Triangle / Spatial Configuration

References

[1] SlobogeanGP, Sprague SA, ScottT, McKeeM, Bhandari M. Management of young femoral neck fractures: is there a consensus? Injury. 2015;46(3):435–440.

[2] GiordanoV, Giordano M, AquinoR, GrossiJO, SennaH, KochHA. How do orthopedic surgeons manage displaced femoral neck fracture in the middle-aged patient? Brazilian survey of 78 Orthopaedic surgeons. Revista Brasileira de Ortopedia. 2019;54(3):288–294.

[3] OñativiaIJ, Slullitel PA, Diaz DilerniaF, Gonzales ViezcasJM, Vietto V, RamkumarPN, et al. Outcomes of nondisplaced intracapsular femoral neck fractures with internal screw fixation in elderly patients: a systematic review. Hip International: The Journal of Clinical and Experimental Research on Hip Pathology and Therapy. 2018;28(1):18–28.

[4] YuanKX, YangF, FuK, ZhuDY, JiangCY, Jin DX, et al. Internal fixation using fully threaded cannulated compression screws for fresh femoral neck fractures in adults. J Orthop Surg Res. 2022;17(1):108.

[5] RamalloDA, KropfLL, ZaluskiAD, Cavalcanti ADS, DuarteMEL, GuimarãesJAM. Factors influencing the outcome of osteosynthesis in the fracture of the femoral neck in young adult patients. Revista Brasileira de Ortopedia. 2019;54(4):408–415.

[6] MüllerMC, BeleiP, PennekampPH, Kabir K, WirtzDC, BurgerC, et al. Three-dimensional computer-assisted navigation for the placement of cannulated hip screws. A Pilot Study International Orthopaedics. 2012;36(7):1463–1469.

[7] ZhangRY, LiJT, ZhaoJX, Zhao Z, ZhangLC, YunC, et al. Comparison of oblique triangular configuration and inverted equilateral triangular configuration of three cannulated screws in treating unstable femoral neck fracture: a finite element analysis. Injury. 2022;53(2):353–361.

[8] ZhangRY, SuXY, ZhaoJX, Li JT, ZhangLC, TangPF. Three-dimensional morphological analysis of the femoral neck torsion angle-an anatomical study. Journal of Orthopaedic Surgery and Research. 2020;15(1):192.

[9] ZhangB, LiuJ, ZhuY, ZhangW. A new configuration of cannulated screw fixation in the treatment of vertical femoral neck fractures. Int Orthop. 2018;42(8):1949–1955.

[10] ZderoR, Keast-Butler O, SchemitschEH. A biomechanical comparison of two triple-screw methods for femoral neck fracture fixation in a synthetic bone model. J Trauma. 2010;69(6):1537–1544.

[11] KimDG, DongXN, CaoT, BakerKC, ShafferRR, Fyhrie DP, et al. Evaluation of filler materials used for uniform load distribution at boundaries during structural biomechanical testing of whole vertebrae. J Biomech Eng. 2006;128(1):161–165.

[12] LiJ, HanL, ZhangH, Zhao Z, SuX, ZhouJ, et al. Medial sustainable nail versus proximal femoral nail antirotation in treating AO/OTA 31-A2.3 fractures: finite element analysis and biomechanical evaluation. Injury. 2019;50(3):648–656.

[13] KemkerB, MagoneK, OwenJ, Atkinson P, MartinS, AtkinsonT. A sliding hip screw augmented with 2 screws is biomechanically similar to an inverted triad of cannulated screws in repair of a Pauwels type-III fracture. Injury. 2017;48(8):1743–1748.

[14] YangM, ChenJ, ZhangD, Wang J, YuK, FuZ, et al. Biomechanical evaluation of a new device for internal fixation of femoral neck fractures. Artif Cells Blood Substit Immobil Biotechnol. 2011;39(4):252–258.

[15] AminianA, GaoF, FedoriwWW, Zhang LQ, KalainovDM, MerkBR. Vertically oriented femoral neck fractures: mechanical analysis of four fixation techniques. J Orthop Trauma. 2007;21(8):544–548.

[16] GoffinJM, PankajP, SimpsonAH. A computational study on the effect of fracture intrusion distance in three- and four-part trochanteric fractures treated with gamma nail and sliding hip screw. J Orthop Res. 2014;32(1):39–45.

[17] LiJ, WangM, ZhouJ, Han L, ZhangH, LiC, et al. Optimum configuration of cannulated compression screws for the fixation of unstable femoral neck fractures: finite element analysis evaluation. Biomed Res Int. 2018;2018:1271762.

[18] BergmannG, Deuretzbacher G, HellerM, GraichenF, Rohlmann A, StraussJ, et al. Hip contact forces and gait patterns from routine activities. J Biomech. 2001;34(7):859–871.

[19] HoffmannS, Paetzold R, StephanD, PüschelK, Buehren V, AugatP. Biomechanical evaluation of interlocking lag screw design in intramedullary nailing of unstable pertrochanteric fractures. J Orthop Trauma. 2013;27(9):483–490.

[20] FenskyF, Nüchtern JV, KolbJP, HuberS, Rupprecht M, JauchSY, et al. Cement augmentation of the proximal femoral nail antirotation for the treatment of osteoporotic pertrochanteric fractures—a biomechanical cadaver study. Injury. 2013;44(6):802–807.

[21] SelvanVT, OakleyMJ, RanganA, Al-Lami MK. Optimum configuration of cannulated hip screws for the fixation of intracapsular hip fractures: a biomechanical study. Injury. 2004;35(2):136–141.

[22] RupprechtM, Grossterlinden L, SellenschlohK, HoffmannM, Püschel K, MorlockM, et al. Internal fixation of femoral neck fractures with posterior comminution: a biomechanical comparison of DHS® and Intertan nail®. Int Orthop. 2011;35(11):1695–1701.

[23] SpringerER, Lachiewicz PF, GilbertJA. Internal fixation of femoral neck fractures. A comparative biomechanical study of Knowles pins and 6.5-mm cancellous screws. Clin Orthop Relat Res. 1991;267:85–92.

[24] HawksMA, KimH, StraussJE, Oliphant BW, GoldenRD, HsiehAH, et al. Does a trochanteric lag screw improve fixation of vertically oriented femoral neck fractures? A biomechanical analysis in cadaveric bone. Clin Biomech (Bristol, Avon). 2013;28(8):886–891.

[25] ChenH, LiJ, ChangZ, Liang X, TangP. Treatment of femoral neck nonunion with a new fixation construct through the Watson-Jones approach. Journal of Orthopaedic Translation. 2019;19:126–132.

[26] TangPF. Establishment of three-element stabilization concept in proximal femur and its significance in treatment of femoral neck nonunion. Chinese Journal of Orthopaedic Trauma. 2020;22(12):1013–1018.

[27] LiJT, ZhangLC, XuGX, TangPF. Effect of invalid reconstruction of proximal femoral triangular structure on failure of fracture surgery. Chinese Journal of Orthopaedics. 2020;40(14):928–935.

[28] ZhouXQ, LiZQ, XuRJ, SheYS, ZhangXX, Chen GX, et al. Comparison of early clinical results for femoral neck system and cannulated screws in the treatment of unstable femoral neck fractures. Orthop Surg. 2021;13(6):1802–1809.

[29] FanZ, HuangY, SuH, JiangT. How to choose the suitable FNS specification in young patients with femoral neck fracture: a finite element analysis. Injury. 2021;52(8):2116–2125.

RIGHTS & PERMISSIONS

2024 2024 The Authors. Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.