Mid-wavelength InAs/GaSb type-II superlattice barrier detector with nBn design and M barrier

Abstract

This study reports the performance of an InAs/GaSb type-II superlattices (T2SLs) detector with nBn structure for mid-wavelength infrared (MWIR) detection. An electronic band structure of M barrier is calculated using 8-band k·p method, and the nBn structure is designed with the M barrier. The detector is prepared by wet etching, which is simple in manufacturing process. X-ray diffraction (XRD) and atomic force microscope (AFM) characteristics indicate that the detector material has good crystal quality and surface morphology. The saturation bias of the spectral response measurements at 77 K is 300 mV, and the device is promising to work at a temperature of 140 K. Energy gap of T2SLs versus temperature is fitted by the Varshni curve, and zero temperature bandgap E_g(0), empirical coefficients α and β are extracted. A dark current density of 3.2×10⁻⁵ A/cm² and differential resistance area (RA) product of 1.0×10⁴ Ω·cm² are measured at 77 K. The dominant mechanism of dark current at different temperature ranges is analyzed. The device with a 50% cutoff wavelength of 4.68 µm exhibits a responsivity of 0.6 A/W, a topside illuminated quantum efficiency of 20% without antireflection coating (ARC), and a detectivity of 9.17×10¹¹ cm·Hz^1/2/W at 77 K and 0.3 V.

References

[1] RogalskiA, MartyniukP. Mid-wavelength infrared nBn for HOT detectors[J]. Journal of electronic materials, 2014, 43(8):2963-2969

[2] LiuZ, ZhaoZ F, GuoH M, et al.. Band structure and optical absorption in InAs/GaSb quantum well[J]. Acta physica sinica, 2012, 61(21):217303

[3] ManykT, HackiewiczK, RutkowskiJ, et al.. Theoretical simulation of T2SLs InAs/GaSb cascade photodetector for HOT condition[J]. Journal of semiconductors, 2018, 39(9): 38-41

[4] LiuZ J, ZhuL Q, ZhengX T, et al.. Interface effect on superlattice quality and optical properties of InAs/GaSb type-II superlattices grown by molecular beam epitaxy[J]. Chinese physics B, 2022, 31(12):128503

[5] MANASREH M O. Antimonide-related strained-layer heterostructures[J]. Lasers optics & photonics, 1997.

[6] HUANG J L, YAN S L, XUE T, et al. Mid-wavelength InAs/InAsSb superlattice photodetector with background limited performance temperature higher than 160 K[J]. IEEE transactions on electron devices, 2022, 69(8).

[7] LiH, ZhangQ, QiX, et al.. High resolution X-ray diffraction study in InAs/GaSb superlattice[J]. Ferroelectrics, 2022, 596(1): 86-94

[8] SunY R, DongJ R, HeY, et al.. A six-junction GaAs laser power converter with different sizes of active aperture[J]. Optoelectronics letter, 2017, 13(1):21-24

[9] YuH L, WuH Y, ZhuH J, et al.. Molecular beam epitaxy of zero lattice-mismatch InAs/GaSb type-II superlattice[J]. Chinese physics letter, 2016, 33(12):142-145

[10] WangY B, XuY, ZhangY, et al.. Effect of compensation doping on the electrical and optical properties of mid-infrared type-II InAs/GaSb superlattice photodetectors[J]. Chinese physics B, 2011, 20(6):6

[11] ZHU H, LIU J, ZHU H, et al. High operating temperature InAs/GaSb superlattice based mid wavelength infrared photodetectors grown by MOCVD[J]. Photonics, 2021, 8(12).

[12] VurgaftmanI, AiferE H, CanedyC L, et al.. Graded band gap for dark-current suppression in long-wave infrared W-structured type-II superlattice photodiodes[J]. Applied physics letter, 2006, 89(12): 4757

[13] HILL C J, SOIBEL A, KEO S A, et al. Growth and performance of superlattice-based long wavelength complementary barrier infrared detectors (CBIRDs)[J]. SPIE proceedings, 2010, 7660.

[14] AIFER E H, WARNER J H, STINE R R, et al. Passivation of W-structured type-II superlattice long-wave infrared photodiodes[J]. SPIE proceedings, 2007, 6542.

[15] MengC, LiJ, YuL, et al.. Investigation of a noise source and its impact on the photocurrent performance of long-wave-infrared InAs/GaSb type-II superlattice detectors[J]. Optics express, 2020, 28(10): 14753-14761

[16] LeeH J, KoS Y, KimY H, et al.. Strain-induced the dark current characteristics in InAs/GaSb type-II superlattice for mid-wave detector[J]. Journal of semiconductors, 2020, 41(6):062302

[17] CuiS N, ChenW Q, JiangD W, et al.. Dark current simulation and analysis for InAs/GaSb long wavelength infrared barrier detectors[J], 2022, 121: 104006

[18] MartyniukP, WrobelJ, PlisE, et al.. Performance modeling of MWIR InAs/GaSb/B-Al_0.2Ga_0.8Sb type-II superlattice nBn detector[J]. Semiconductor science & technology, 2012, 27(5): 55002-55011

[19] NguyenB M, RazeghiM, NathanV, et al.. Type-II M structure photodiodes: an alternative material design for mid-wave to long wavelength infrared regimes[J]. Quantum sensing and nanophotonic devices IV, 2007, 6479: 10

[20] LiN, ChenW, ZhengD, et al.. The investigations to eliminate the bias dependency of quantum efficiency of InGaAsSb nBn photodetectors for extended short wavelength infrared detection[J]. Infrared physics & technology, 2020, 111: 103461

[21] NguyenB M, HoffmanD, HuangK W, et al.. Background limited long wavelength infrared type-II InAs/GaSb superlattice photodiodes operating at 110 K[J]. Applied physics letter, 2008, 93(12):085316

[22] WangF, ChenJ, XuZ, et al.. Performance comparison between the InAs-based and GaSb-based type-II superlattice photodiodes for long wavelength infrared detection[J]. Optics express, 2017, 25(3): 1629-1635

[23] GautamN, MyersS, BarveA V, et al.. Band engineered HOT midwave infrared detectors based on type-II InAs/GaSb strained layer superlattices[J]. Infrared physics & technology, 2013, 59: 72-77

[24] JangA, LeeH J, KimY C, et al.. Electrical characteristics of a Ga-free T2SL mid-wave infrared nBn detector based on an InAs/AlAsSb/InAsSb barrier[J]. Journal of electronic materials, 2022, 9: 51

[25] CerveraC, JaworowiczK, At-KaciH, et al.. Temperature dependence performances of InAs/GaSb superlattice photodiode[J]. Infrared physics & technology, 2011, 54(3):258-262

[26] HoangA H, DehzangiA, AdhikaryS, et al.. High performance bias-selectable three-color short-wave/mid-wave/ long-wave infrared photodetectors based on type-II InAs/GaSb/AlSb superlattices[J]. Scientific reports, 2016, 6: 24144

[27] PLIS E, RODRIGUEZ J B, LEE S J, et al. Electrochemical sulphur passivation of InAs/GaSb strain layer superlattice detectors[J]. Electronics letter, 2006, 42(21).

[28] KimH S. Dark current analysis of an InAs/GaSb type II superlattice infrared photodiode with SiO₂ passivation[J]. Journal of the Korean Physical Society, 2021, 78(11):1141-1146

[29] KimH S. Performance of an InAs_GaSb type-II superlattice photodiode with Si₃N₄ surface passivation[J]. Current optics and photonics, 2021, 5(2):129-133

[30] SUZUKI R, OZAKI K, TSUNODA K, et al. ALD-Al₂O₃ passivation effects on surface characteristics of InAs/GaSb type-II superlattice infrared photodetectors[C]//Infrared Technology and Applications XLV, April 14–18, 2019, Baltimore, Maryland, USA.

[31] PlisE, MyersS, KhoshakhlaghA, et al.. InAs/GaSb strained layer superlattice detectors with nBn design[J]. Infrared physics technology, 2009, 52(6):335-339

[32] HoodA, HoffmanD, NguyenB M, et al.. High differential resistance type-II InAs/GaSb superlattice photodiodes for the long-wavelength infrared[J]. Applied physics letter, 2006, 89(9):286-324