Performance improvement method of single-ended BOTDA system based on Fresnel reflection

Lixin Zhang , Yongqian Li , Min Tian , Tian Li

Optoelectronics Letters ›› 2022, Vol. 18 ›› Issue (3) : 170 -174.

PDF
Optoelectronics Letters ›› 2022, Vol. 18 ›› Issue (3) : 170 -174. DOI: 10.1007/s11801-022-1118-6
Article

Performance improvement method of single-ended BOTDA system based on Fresnel reflection

Author information +
History +
PDF

Abstract

To solve the problems of small signal intensity and low signal-to-noise ratio (SNR) in single-ended Brillouin optical time domain analysis (BOTDA) system based on Fresnel reflection, we propose and experimentally demonstrate a pulse coding single-ended BOTDA system, which can improve the SNR and temperature measurement accuracy. A single-ended BOTDA temperature sensing system using single pulse and pulse coding is designed, and the Brillouin time domain signal and Brillouin frequency shift under different pulse coding bits are measured. The experimental results show that the fluctuations of Brillouin power and Brillouin frequency shift are gradually decreased with the increase of pulse coding bits, and the SNR under 32 bit Golay coding offers a 6.18 dB improvement with respect to traditional single pulse system. And the temperature measurement accuracy under 32 bit coding over a 9.35-km-long sensing fiber can be accurately measured as 1.59 °C, while providing a 1.73 °C enhancement when compared to single pulse system.

Cite this article

Download citation ▾
Lixin Zhang, Yongqian Li, Min Tian, Tian Li. Performance improvement method of single-ended BOTDA system based on Fresnel reflection. Optoelectronics Letters, 2022, 18(3): 170-174 DOI:10.1007/s11801-022-1118-6

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

ChenF, SchneiderT. Benefits of spectral property engineering in distributed Brillouin fiber sensing[J]. Sensors, 2021, 21(5):1881

[2]

ZhuH N, YuL, ZhangY F, et al.. Optimized support vector machine assisted BOTDA for temperature extraction with accuracy enhancement[J]. IEEE photonics journal, 2020, 12(1): 1-14

[3]

LiH, LiuY, CaoJ X, et al.. Investigation of the BOTDA technology for structural condition monitoring of urban tunnel[J]. Materials science and engineering, 2019, 603: 042003

[4]

LiuY, LiH, WangY L, et al.. Damage detection of tunnel based on the high-density cross-sectional curvature obtained using strain data from BOTDA sensors[J]. Mechanical systems and signal processing, 2021, 158: 107728

[5]

DongY K, QiuL Q, LuY L, et al.. Sensitivity-enhanced distributed hydrostatic pressure sensor based on BOTDA in single-mode fiber with double-layer polymer coatings[J]. Journal of lightwave technology, 2020, 38(8):2564-2571

[6]

NiklesM, ThevenazL, RobertP. Simple distributed fiber sensor based on Brillouin gain spectrum analysis[J]. Optics letters, 1996, 21(10):758-760

[7]

LiY Q, ZhangL X, FanH B, et al.. A self-heterodyne detection Rayleigh Brillouin optical time domain analysis system[J]. Optics communications, 2018, 427: 190-195

[8]

LiY Q, ZhangL X, FanH B, et al.. Rayleigh Brillouin optical time domain analysis system using heterodyne detection and wavelength scanning[J]. Optical engineering, 2018, 57(5):056112

[9]

HuJ, ZhangX, ZhangY. A hybrid single-end-access BOTDA and COTDR sensing system using heterodyne detection[J]. Journal of lightwave technology, 2013, 31(12): 1954-1959

[10]

SotoM A, BologniniG, PasqualeF D, et al.. Simplex-coded BOTDA fiber sensor with 1 m spatial resolution over a 50 km range[J]. Optics letters, 2010, 35(2):259-261

[11]

ZhaoC, TangM, LiaoR L, et al.. SNR-enhanced fast BOTDA combining channel estimation technique with complementary pulse coding[J]. IEEE photonics journal, 2018, 10(5):1-10

[12]

JiangP, YanL S, ZhouY, et al.. Effect and elimination of polarization random noise in Golay-coded Brillouin optical time domain analysis fiber sensors[J]. Acta optica sinica, 2020, 40(07):20-26(in Chinese)

[13]

ZhouY, YanL S, LiZ L, et al.. Polarization division multiplexing pulse coding for eliminating the effect of polarization pulling in Golay-coded BOTDA fiber sensor[J]. Optics express, 2018, 26(15):19686-19693

[14]

SunQ, TuX, SunS, et al.. Long-range BOTDA sensor over 50 km distance employing pre-pumped Simplex coding[J]. Journal of optics, 2016, 18(5): 055501

[15]

LuoY, YanL S, ShaoL Y, et al.. Research on Golay-differential pulse hybrid coding technology based on Brillouin optical time domain analysis sensor system[J]. Acta optica sinica, 2016, 36(08): 0806002 in Chinese)

[16]

LiangH, LuY G, LiC L, et al.. Research on decoding method of Brillouin optical time-domain reflectometry system based on correlated sequence pulses[J]. Acta optica sinica, 2011, 31(10): 1006002 in Chinese)

AI Summary AI Mindmap
PDF

114

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/