Multi-pulse operation in an actively Q-switched Er-doped fiber laser based on electro-optic modulator

Abstract

In this paper, we report an experimental observation of different states of multi-pulse operation in an actively Q-switched Er-doped fiber laser, which has applications in pulse coding in optical communications. The Q factor is switched by an electro-optic modulator. Completely separated multiple pulses are obtained due to the short response time of the modulator. The influence of pump power and modulation frequency on output pulse state is investigated. In the experiment, the repetition rate of Q-switched pulse is not always consistent with the modulation signal. Single-pulse, single-dual-pulse, dual-pulse, dual-triple pulse, and multiple pulses are observed in one modulation period by increasing pump power. Single-pulse is also observed in two or three modulation periods by increasing the frequency of modulation signal. In addition, the waveform of modulating signal and the polarization state of modulated signal also affect the multi-pulse operation accordingly.

References

[1] WoodwardR I, MajewskiM R, MacadamN, et al.. Q-switched Dy: ZBLAN fiber lasers beyond 3 µm: comparison of pulse generation using acous-to-optic modulation and inkjet-printed black phosphorus[J]. Optics express, 2019, 27(10):15032-15045

[2] Alaniz-BaylonJ, Duran-SanchezM, Álvsrez-TamayoR I, et al.. Fiber laser with simultaneous multi-wavelength Er/Yb passively Q-switched and single-wavelength Tm gain-switched operations[J]. Photonic research, 2019, 7(6):608-614

[3] RohdeI, MaschJ M, Theisen-KundeD, et al.. Resection of calcified aortic heart leaflets in vitro by Q-switched 2m microsecond laser radiation[J]. Journal of cardiac surgery, 2015, 30(2):157-162

[4] ShinB, LeeJ, KangK, et al.. Numerical investigation into the impact of Q-switch rise time on the output pulse characteristics in an actively Q-switched ytterbium-doped fiber laser[J]. Laser physics letters, 2020, 17(8):085102

[5] WangY, XuC Q. Actively Q-switched fiber lasers: switching dynamics and nonlinear processes[J]. Progress in quantum electronics, 2007, 31(3–5): 131-216

[6] BarmenkovY O, Kir’YanovA V, AndresM V. Nonlinear dynamics of ytterbium-doped fiber laser Q-switched using acousto-optical modulator[J]. European physical journal-special topics, 2014, 223(13):2775-2788

[7] RehanM, MishraA K, RastogiV. Generation of femtosecond pulse train by pulse splitting in a large mode area fiber at 2 µm wavelength[J]. Optical fiber technology, 2020, 60: 102362

[8] AdachiS, KoyamadaY. Analysis and design of Q-switched erbium-doped fiber lasers and their application to OTDR[J]. Journal of lightwave technology, 2002, 20(8):1506-1511

[9] RoyP, PagnouxD. Analysis and optimization of a Q-switched erbium doped fiber laser working with a short rise time modulator[J]. Optical fiber technology, 1996, 2(3):235-240

[10] ZhenL. The split pulses from actively Q-switched fiber lasers[J]. Laser physics, 2013, 23(12):125105

[11] KolpakovS A, BarmenkovY O, Guzman-ChavezA D, et al.. Distributed model for actively Q-switched erbium-doped fiber lasers[J]. IEEE journal of quantum electronics, 2011, 47(7): 928-934

[12] ShekharN K, ChowdhuryS D, SenR, et al.. Numerical and experimental study of multi-peaked and trimmed pulses in an actively Q-switched fiber laser[C], 2014, Washington, Optical Society of America: T3A.34

[13] LimE L, AlamS U, RichardsonD J. The multi-peak phenomena and nonlinear effects in Q-switched fiber lasers[J]. IEEE photonic technology letters, 2011, 23(23):1763-1765

[14] JafariS, FathiD, TalebH. Optimal pulse-shaping in actively Q-switched ytterbium-doped fiber lasers[J]. IEEE access, 2020, 8: 77716-77724

[15] JiangN, PattonR A, LempertW R, et al.. Development of high-repetition rate CH PLIF imaging in turbulent nonpremixed flames[J]. Proceedings of the combustion institute, 2011, 33(1):767-774