Effect of adhesive type on the sensitivity coefficient of FBG sensor bonded on the surface of CFRP

Abstract

In this paper, the effects of three types of commonly used adhesives were studied via experiment and simulation. The results show that the strain sensitivity of fiber Bragg grating (FBG) sensor is about 1.201 pm/με and the effects of three adhesives of epoxy resin, AB glue and 502 glue with the same thickness and length on sensitivity coefficients of FBG sensors are 99.20%, 93.80% and 96.50%, respectively. Finally, the sensitivity coefficient of the simulated FBG sensor is the same as the test result by ANSYS modeling.

References

[1] AlamdariM M. Thierry Rakotoarivelo and Nguyen Lu Dang Khoa, Mechanical Systems & Signal Processing, 2017, 87: 384

[2] MieloszykM, OstachowiczW. Marine Structures, 2017, 51: 65

[3] VieiraD R, VieriaR K, ChainM C. International Journal of Sustainable Development & World Ecology, 2017, 24: 214

[4] RuzekR, KudrnaP, KadlecM, TserpesK I. Composite Structures, 2014, 107: 737

[5] HengT, JihuiW, YongdongJ, ChunshengY, HaixiaoH, HongyuanZ. Material Review, 2012, 26: 111

[6] ShiW. Master’s dissertation of Guangzhou University, 2016,

[7] WenyuanZ, YuanW, YangyangS, QinghuaZ, ZhenglinZ, PengchongZ, YinY. Piezoelectrics & Acoustooptics, 2016, 38: 111

[8] LiangM, ChenN, FangX, WuG. Applied Optics, 2018, 57: 5837

[9] RujunW, BailinZ, PengfeiH, YuegangT. Optics and Precision Engineering, 2014, 22: 24

[10] LauK, YuanL, ZhouL, WuJ, WooC. Composite Structures, 2001, 51: 9

[11] XueG, FangX, HuX, GongL. Applied Optics, 2018, 57: 2939

[12] YangJ, ZhaK, GuoZ. Aerospace Materials and Technology, 1998, 6: 27

[13] NairnJ A. Mechanics of Materials, 1997, 26: 63

[14] YO, SY, TK, NT. Smart Mater Structure, 2000, 9: 832

[15] TaoC, MengliY, ShuliangL, YanD. Optoelectronics Letters, 2018, 14: 92