Fatigue damage characterization in asphalt mixtures using acoustic emission with information entropy and the maximum Lyapunov exponent

Abstract

Traditional non-destructive evaluation (NDE) methods often suffer from insufficient sensitivity in detecting early-stage microcracks and lack real-time monitoring capability. To overcome these limitations, this study conducted four-point bending fatigue tests on notched beam specimens under loading frequencies of 10 Hz and 15 Hz. During testing, the primary acoustic emission (AE) parameters—amplitude, energy, rise time, and duration—were systematically analyzed. In addition, information entropy was introduced to characterize signal randomness, while the maximum Lyapunov exponent (MLE) was employed to evaluate the chaotic characteristics of crack evolution, thereby revealing the staged damage evolution process. The results showed that amplitude was superior to other parameters in tracking fatigue damage, with its coefficient of variation (CV) remaining below 20%. Its evolution clearly corresponded to the four physical processes: pore compaction (Stage I), microcrack initiation (Stage II), stable propagation of macrocracks (Stage III), and catastrophic failure (Stage IV). Amplitude entropy exhibited distinct fluctuations across different stages, while MLE analysis further revealed the inherent disorder of crack evolution, with its variation validating the characteristics of each damage stage. Based on the coupled entropy–MLE framework, predictive thresholds (entropy > 10, MLE > 0.15, amplitude CV > 10) were proposed. Compared with conventional approaches, this framework enabled earlier identification of metastable crack propagation and effectively reduced false alarm rates. These findings demonstrate that the synergy of entropy and chaos analysis holds significant potential for NDE applications, offering new perspectives and methods for data-driven decision-making in pavement engineering.

Keywords

Asphalt mixture / Acoustic emission / Fatigue damage / Information entropy / Maximum Lyapunov exponent

References

[1] Li J, Qin Y, Zhang X, Shan B, Liu C. Emission characteristics, environmental impacts, and health risks of volatile organic compounds from asphalt materials: A state-of-the-art review. Energy & Fuels, 2024, 38(6): 4787-4802

[2] Shi B, Dong Q, Chen X, Gu X, Wang X, Yan S. A comprehensive review on the fatigue resistance of recycled asphalt materials: Influential factors, correlations and improvements. Construction and Building Materials, 2023

[3] Jin, C., Li, J., Yang, H., Wang, Y., & Hu, H. (2024). Optimizing epoxy asphalt tack coat formulations for improved adhesion and working performance of ultrathin wearing course. Journal of Adhesion Science and Technology, 1–26.https://doi.org/10.1080/01694243.2024.2411335

[4] Nasir, A., Butt, F., & Ahmad, F. (2024). Enhanced mechanical and axial resilience of recycled plastic aggregate concrete reinforced with silica fume and fibers. Innovative Infrastructure Solutions, 10(1), 4.https://doi.org/10.1007/s41062-024-01803-z

[5] Ahmad, F., Rawat, S., Yang, R., Zhang, L., Fanna, D. J., Soe, K., & Zhang, Y. (2025). Effect of metakaolin and ground granulated blast furnace slag on the performance of hybrid fibre-reinforced magnesium oxychloride cement-based composites. International Journal of Civil Engineering, 23(5), 1–16.https://doi.org/10.1007/s40999-025-01074-4

[6] Liu H, Kong D, Guo T, Jin D, Chu C, Yu H, Lv S. Experimental study on creep-fatigue damage of hot central plant recycling asphalt mixture containing high RAP. Construction and Building Materials, 2024, 440 137348

[7] Liu Hongfu Lu, Hong ZX, Yi Zhengwei Yu, Xin JD, Songtao Lv. Fatigue life of pre-cut seam asphalt mixture composite beams: A combined study of fatigue damage evolution and reflective cracking extension. Buildings, 2024, 15(1): 50-50

[8] Fu L, Zhou H, Yuan J, An W, Chen X. Damage fracture characterization of asphalt mixtures considering freeze–thaw cycling and aging effects based on acoustic emission monitoring. Materials, 2021, 14(20): 5930

[9] Qiu J, Yang Q, Qiu X, Xiao S, He L, Hu G. Use of acoustic emission for exploring characteristics and behaviors of mixed-mode fracture process of asphalt mixtures. Materials and Structures, 2022, 55(7199

[10] Wei H, Liu Y, Li J, Wang F, Zheng J, Yuan Z. Characterizing fatigue damage evolution in asphalt mixtures using acoustic emission and Gaussian mixture model analysis. Construction and Building Materials, 2023, 409 133973

[11] Wei H, Zhang H, Li J, Zheng J, Ren J. Effect of loading rate on failure characteristics of asphalt mixtures using acoustic emission technique. Construction and Building Materials, 2023, 364 129835

[12] Xu J, Luo X, Qiu X, Hu G. Wavelet and fractal analysis of acoustic emission characteristic of fatigue damage of asphalt mixtures. Construction and Building Materials, 2022, 349 128643

[13] Liu H, Kuang A, Wang Z, Chu C, Yu H, Lv S. Investigation on fracture and fatigue performance of cold recycling emulsified asphalt mixture based on acoustic emission parameters. Journal of Cleaner Production, 2023, 428 139285

[14] Li J, Wang L, Xiong H, Yang H. Research on characterization of asphalt pavement performance by acoustic emission technology. International Journal of Pavement Research and Technology, 2023, 16(2444-473

[15] Jiao Y, Zhang L, Guo Q, Guo M, Zhang Y. Acoustic emission-based reinforcement evaluation of basalt and steel fibers on low-temperature fracture resistance of asphalt concrete. Journal of Materials in Civil Engineering, 2020, 32(5): 04020104

[16] Wei H, Xu B, Li J, Zheng J, Liu Y, Lu R. Effect of temperature on fatigue damage evolution of asphalt mixture based on cluster analysis and acoustic emission parameters. Engineering Fracture Mechanics, 2025, 317 110954

[17] Li J, Wang L, Zhang X, Miao Y, Guo Y, Wang Y. Cracking process analysis and fracture pattern recognition of asphalt mixture based on acoustic emission characteristics. Journal of Materials in Civil Engineering, 2023, 35(1204023449

[18] Meng X, Liu Y, Wang X, Dong J, Ning Z, Liang G. The failure evolution of hydraulic asphalt concrete under different tensile fatigue loading. Construction and Building Materials, 2024, 431 136543

[19] Qiu X, Xu J, Xu W, Yang Q, Wang F, Yuan J. Diagnosis of damage evolution process for asphalt mixtures using pattern recognition with acoustic emission signals. Construction and Building Materials, 2021, 280 122536

[20] Karimian SF, Modarres M. Acoustic emission signal clustering in CFRP laminates using a new feature set based on waveform analysis and information entropy analysis. Composite Structures, 2021, 268 113987

[21] Li M, Zhao Y, Mao F, Fang S, Qin G, Xu N, Zhu D. Study on damage and fracture characteristics of wood based on acoustic emission b-value and seismic magnitude difference entropy. Journal of Wood Science, 2024, 70(113

[22] Tian Y, Liu D, Chen X, Wang X, Zhang J. Damage evolution of steel-UHPC composite beams using AE and DIC techniques. Journal of Constructional Steel Research, 2025, 224 109163

[23] Zhou Q, Ma H, Liu M, Li X, Wen B. Fatigue damage identification based on Kullback-Leibler relative entropy for raw acoustic emission waveform. Mechanical Systems and Signal Processing, 2024, 220 111658

[24] Cheng G, Sun X, Li J. Study on the precursors of coal-rock fracture based on the maximum Lyapunov exponent of acoustic emission parameters. Geofluids, 2022, 2022(13280185

[25] Govekar E, Gradišek J, Grabec I. Analysis of acoustic emission signals and monitoring of machining processes. Ultrasonics, 2000, 38(1–8598-603

[26] Guleria V, Kumar V, Singh PK. Prediction of surface roughness in turning using vibration features selected by largest Lyapunov exponent based ICEEMDAN decomposition. Measurement, 2022, 202 111812

[27] Brake MR. The effect of the contact model on the impact-vibration response of continuous and discrete systems. Journal of Sound and Vibration, 2013, 332(15): 3849-3878

[28] da Silva L, Benta A, Picado-Santos L. Asphalt rubber concrete fabricated by the dry process: Laboratory assessment of resistance against reflection cracking. Construction and Building Materials, 2018, 160: 539-550

[29] Xiang H, Chen L, Yang Bo, Yang D, He Z. The crack-healing performance of asphalt mixture based on acoustic emission system. Construction and Building Materials, 2024, 411 134787

[30] Liu, X., Wu, K., Giacomello, G., Yue, Y., Feng, M., Xu, C., & Pasetto, Marco. (2025). Enhancing cracking resistance in semi-flexible pavements using an interfacial immersion method. Case Studies in Construction Materials, 22, e04311–e04311.https://doi.org/10.1016/j.cscm.2025.e04311

[31] Zhirong Xu, Chang Y, Chen Z. Study on test standard of asphalt mixture dynamic modulus. Journal of Traffic and Transportation Engineering, 2015, 15(03): 1-8

[32] Ghanizadeh AR, Fakhri M, Amlashi AT, Dessouky S. Effect of strain waveform modeling and loading frequency on the fatigue life of asphalt concrete. Construction and Building Materials, 2025, 462: 139906-139906

[33] Li J, Wang L, Li F, Su N, Gao Y, Zhang X. Propagation characteristics of acoustic emission waves in three different asphalt pavement materials. Journal of Materials in Civil Engineering, 2024

[34] Liu, H., Kuang, A., Wang, Z., Chu, C., Yu, H., & Lv, S. (2023). Investigation on fracture and fatigue performance of cold recycling emulsified asphalt mixture based on acoustic emission parameters. Journal of Cleaner Production, 428.https://doi.org/10.1016/j.jclepro.2023.139285

[35] Shannon CE. A mathematical theory of communication. The Bell System Technical Journal, 1948, 27(3): 379-423

[36] Ren S, Wang L, Xie K. Experimental study on critical characteristics of shale tension compression failure based on acoustic emission counting information entropy. Journal of Chongqing Jiaotong University: Natural Sciences, 2020, 39(8): 101-107

[37] Ding R, Luo R, Fang S, Lai F, Li M. Research on wood damage fracture process based on acoustic emission signal information entropy. Journal of Northwest Forestry University, 2022, 37(5): 210-217

[38] Chen, Y., Yang, J., Jin, R., Zhao, C., & Mao, H. (2022). Experimental study on acoustic emission signals during glunting process of grinding wheels based on chaos theory. Noise and Vibration Control, 42(05), 148–153+193.https://nvc.sjtu.edu.cn/CN/Y2022/V42/I5/148

[39] Rosenstein MT, Collins JJ, De LC. A practical method for calculating largest lyapunov exponents from small data sets. Physica D: Nonlinear Phenomena, 1993, 65(3): 117-134

[40] Seo Y, Kim YR. Using acoustic emission to monitor fatigue damage and healing in asphalt concrete. KSCE Journal of Civil Engineering, 2008, 12(4): 237-243

[41] Qiu, X., Wang, J., & Yang, Q. (2019). Assessment of fatigue damage in asphalt mixture using an acoustic emission approach. IOP Conference Series: Materials Science and Engineering, 542(1), 012051 (7pp).https://doi.org/10.1088/1757-899X/542/1/012051

[42] Ahmad, F., Rawat, S., Yang, R., Zhang, L., & Zhang, Y. (2025). Fire resistance and thermal performance of hybrid fibre-reinforced magnesium oxychloride cement-based composites. Construction and Building Materials, 472, 140867.https://doi.org/10.1016/j.conbuildmat.2025.140867

[43] Ahmad Z, Qureshi MI, Ahmad F, Ouni MHE, Asghar MZ, Ghazouani N. Effect of macro synthetic fiber (MSF) on the behavior of conventional concrete and the concrete containing e-waste aggregates. Materials and Structures, 2025, 58(7): 234-234

Funding

National Key R&D Program of China(2023YFB2603500)

RIGHTS & PERMISSIONS

The Author(s)