Magnesium Borate/Boron Nitride Composite Whiskers Strengthen the Mechanical Properties and Thermal Conductivity of Epoxy Resin Composite Materials

Peilin Zhou , Huasong Liang , Wenbiao Li , Wenzhuo Chen , Yuchun Ji , Zhengde Li , Jilin Wang

Journal of Wuhan University of Technology Materials Science Edition ›› 2025, Vol. 40 ›› Issue (6) : 1598 -1605.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2025, Vol. 40 ›› Issue (6) :1598 -1605. DOI: 10.1007/s11595-025-3196-3
Advanced Materials
research-article
Magnesium Borate/Boron Nitride Composite Whiskers Strengthen the Mechanical Properties and Thermal Conductivity of Epoxy Resin Composite Materials
Author information +
History +
PDF

Abstract

A highly thermally conductive magnesium borate/boron nitride (A-MBN) composite whisker was developed which was surface functionalized by (3-Aminopropyl)triethoxysilane. Its growth mechanism was proposed. Then, A-MBN/epoxy composites were prepared. When the A-MBN content is 8wt%, the thermal conductivity of the A-MBN/EP composite is 0.61 W·m−1·K−1, which is 230% higher than that of pure EP. At the same time, the tensile strength of the composite material is 85.4% higher than that of the pure EP, and it also maintains excellent electrical insulation property. Finally, the infrared imaging test verifies the excellent heat dissipation performance of the composite material, indicating that the composite material has broad application prospects in the field of thermal conductive materials.

Keywords

thermal conductivity whisker / mechanical properties / thermal properties

Cite this article

Download citation ▾
Peilin Zhou, Huasong Liang, Wenbiao Li, Wenzhuo Chen, Yuchun Ji, Zhengde Li, Jilin Wang. Magnesium Borate/Boron Nitride Composite Whiskers Strengthen the Mechanical Properties and Thermal Conductivity of Epoxy Resin Composite Materials. Journal of Wuhan University of Technology Materials Science Edition, 2025, 40(6): 1598-1605 DOI:10.1007/s11595-025-3196-3

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Chen WZ, Yu YL, Gu Y P, et al. . Controllable Synthesis of Boron Nitride Submicron Tubes and Their Excellent Mechanical Property and Thermal Conductivity Applied in the Epoxy Resin Polymer Composites. Compos. Part A Appl. Sci. Manuf.. 2022, 154: 106 783 J]

[2]

Wang JL, Lu DP, Xuan WP, et al. . Boron Nitride Microribbons Strengthened and Toughened Alumina Composite Ceramics with Excellent Mechanical, Dielectric, and Thermal Conductivity Properties. J. Adv. Ceram.. 2024, 13: 496-506 J]

[3]

Wang BK, Zhao Z, Li MY, et al. . Enhancing the Thermal Conductivity of Nanofibrillated Cellulose Films with 1D Bn Belts Formed by In-situ Generation and Sintering of BN Nanosheets. J. Adv. Ceram.. 2023, 12: 2 257-2 270 J]

[4]

Jin FL, Li X, Park SJ. Synthesis and Application of Epoxy Resins: A Review. J. Ind Eng Chem.. 2015, 29: 1-11 J]

[5]

Huang CL, Qian X, Yang RG, et al. . Thermal Conductivity of Polymers and Polymer Nanocomposites. Mater. Sci. Eng. R Rep.. 2018, 132: 1-22 J]

[6]

Han ZD, Fina A. Thermal Conductivity of Carbon Nanotubes and Their Polymer Nanocomposites: A Review. Prog. Polym. Sci.. 2011, 36: 914-944 J]

[7]

Zhang XH, Lu WB, Zhou GH, et al. . Understanding the Mechanical and Conductive Properties of Carbon Nanotube Fibers for Smart Electronics. Adv. Mater.. 2020, 32: 19 020[J]

[8]

Wang WM, Li ZL, Prestat E, et al. . Reinforcement of Polymer-Based Nanocomposites by Thermally Conductive and Electrically Insulating Boron Nitride Nanotubes. ACS Appl. Nano Mater.. 2019, 3: 364-374 J]

[9]

Yao YM, Zhu XD, Zeng XL, et al. . Vertically Aligned and Interconnected SiC Nanowire Networks Leading to Significantly Enhanced Thermal Conductivity of Polymer Composites. ACS Appl. Mater. Interfaces.. 2018, 10: 9 669-9 678 J]

[10]

Xu C Y, Miao M, Jiang XF, et al. . Thermal Conductive Composites Reinforced via Advanced Boron Nitride Nanomaterials. Compos. Commun.. 2018, 10: 103-109 J]

[11]

Wang JL, Li ZL, Gu YL, et al. . Synthesis of Boron Nitride Nanotubes Using Glass Fabrics as Catalyst Growth Framework. Ceram. Int.. 2015, 41: 1 891-1 896 J]

[12]

Jakubinek MB, Niven JF, Johnson MB, et al. . Thermal Conductivity of Bulk Boron Nitride Nanotube Sheets and Their Epoxy-Impregnated Composites. Phys. Status Solidi A. 2016, 213: 2 237-2 242 J]

[13]

Yung KC, Xu T, Choy HS. Development of high Thermal Conductivity via Bnnts/Epoxy/Organic-Si Hybrid Composite Systems. J. Mater. Sci. Mater. Electron.. 2016, 27: 5 217-5 224 J]

[14]

Sun CH, Yu HX, Xu LQ, et al. . Recent Development of the Synthesis and Engineering Applications of One-Dimensional Boron Nitride Nanomaterials. J. Nanomater.. 2010, 2010: 163 561 J]

[15]

Chen ZG, Zou J, Liu G, et al. . Novel Boron Nitride Hollow Nanoribbons. ACS Nano.. 2008, 2: 2 183-2 191 J]

[16]

Zhang X, Lian G, Si HB, et al. . Novel BN Porous-Hollow Nanorods: Synthesis, Tunable Dimensions, Property and Formation Mechanism. J. Mater. Chem. A. 2013, 1: 119 92 J]

[17]

Li F, Lin CX, Yang LJ, et al. . Synthesis and Thermodynamic Properties of Magnesium Borates. Adv. Mat. Res.. 2013, 2649: 220-223[J]

[18]

Zhang J, Huang Y, Lin J, et al. . From Al4B2O9 Nanowires to BN-Coated Al18B4O33 Nanowires. J. Phys. Chem. B.. 2005, 109: 13 060-13 062 J]

[19]

Fan Y, Chen JP, Xue YM, et al. . Controlled Synthesis of Boron Nitride (BN) Coating on Al4B2O9 Nanowhiskers. J. Nanopart Res.. 2013, 15: 1-8 J]

[20]

Pan A, Chen YJ, Li JB. An Effective Route for the Synthesis of Boron Nitride Micro-nano Structures and the Growth Mechanism. Cryst. Eng. Comm.. 2015, 17: 115-198 J]

[21]

Ciofani G, Genchi GG, Liakos I, et al. . A Simple Approach to Covalent Functionalization of Boron Nitride Nanotubes. J. Colloid Interface Sci.. 2012, 374: 308-314 J]

[22]

Zhang C, Huang RJ, Wang YG, et al. . Aminopropyltrimethoxysilane-functionalized Boron Nitride Nanotube Based Epoxy Nanocomposites with Simultaneous High Thermal Conductivity and Excellent Electrical Insulation. J. Mater. Chem. A.. 2018, 6: 20 663-20 668 J]

[23]

Qasrawi AF, Kayed TS, Mergen A, et al. . Synthesis and Characterization of Mg2B2O5. Mater. Res. Bull.. 2005, 40: 583-589 J]

[24]

Xuan WP, Ji YC, Liu BS, et al. . Spark Plasma Sintering of Boron Nitride Micron Tubes Reinforced Boron Carbide Ceramics with Excellent Mechanical Property. Int. J. Appl. Ceram. Technol.. 2023, 20: 1 457-1 469 J]

[25]

Liu BP, Yan SH, Song ZQ, et al. . One-Step Synthesis of Boron Nitride Quantum Dots: Simple Chemistry Meets Delicate Nanotechnology. Chem. Eur. J.. 2016, 22: 18 899-18 907 J]

[26]

Liu BS, Gu YP, Ji YC, et al. . Thin-walled Boron Nitride Micron Square Tube Decorated by Nanosheets: Preparation, Characterization and Adsorption Property. Ceram. Int.. 2021, 47: 14 115-14 123 J]

[27]

Zhu WC, Xiang L, Zhang Q, et al. . Morphology Preservation and Crystallinity Improvement in the Thermal Conversion of the Hydrothermal Synthesized MgBO2(OH) Nanowhiskers to Mg2B2O5 Nanowhiskers. J. Cryst. Growth. 2008, 310: 4 262-4 267 J]

[28]

Chen C, Xue Y, Li Z, et al. . Construction of 3D Boron Nitride Nanosheets/Silver Networks in Epoxy-Based Composites with high Thermal Conductivity via In-situ Sintering of Silver Nanoparticles. Chem. Eng. J.. 2019, 369: 1 150-1 160 J]

[29]

Ji YC, Mao W, Liao H, et al. . Boron Nitride Nanotube-nanosheet Hierarchical Structures and Its Optical/adsorption Properties. Chem. Res. Chin. Univ.. 2019, 40: 216-223[J]

[30]

Li W, Yang H, Chen SF, et al. . Temperature-Dependent Morphology Evolution of Boron Nitride and Boron Carbonitride Nanostructures. J. Nanomater.. 2019, 2019: 1-11[J]

[31]

Kipcak AS, Yildirim M, Aydin Yuksel S, et al. . The Synthesis and Physical Properties of Magnesium Borate Mineral of Admontite Synthesized from Sodium Borates. Adv. Mater. Sci. Eng.. 2014, 2014: 1-9 J]

[32]

Kang S, Jeon S, Moon SY, et al. . Fabrication of Noncovalently Functionalized Boron Nitride Nanotubes with High Stability and Water-Redispersibility. J. Phys. Chem. Lett.. 2020, 11: 4 511-4 516 J]

[33]

Weng QH, Wang XB, Wang X, et al. . Functionalized Hexagonal Boron Nitride Nanomaterials: Emerging Properties and Applications. Chem. Soc. Rev.. 2016, 45: 3 412-3 989 J]

[34]

Chen XM, Zhang LY, Park C, et al. . Mechanical Strength of Boron Nitride Nanotube-Polymer Interfaces. Appl. Phys. Lett.. 2015, 107: 253 105 J]

[35]

Tang L, Ruan KP, Liu X, et al. . Flexible and Robust Functionalized Boron Nitride/Poly(p-Phenylene Benzobisoxazole) Nanocomposite Paper with High Thermal Conductivity and Outstanding Electrical Insulation. Nano-Micro Lett.. 2023, 16: 38 J]

[36]

Liang L, Feng Y, Yang KL, et al. . High Thermal Conductivity Electrical Insulation Composite EP/h-BN Obtained by DC Electric Field Induction. Polym. Compos.. 2024, 45: 181-192 J]

[37]

Huang Y, Kormakov S, He XX, et al. . Conductive Polymer Composites from Renewable Resources: An Overview of Preparation, Properties, and Applications. Polymers. 2019, 11: 187 J]

[38]

Swamy MCK, Satyanarayan. A Review of the Performance and Characterization of Conventional and Promising Thermal Interface Materials for Electronic Package Applications. J. Electron. Mater.. 2019, 48: 7 623-7 634 J]

[39]

Wang JL, Li ZD, Chen WZ, et al. . Preparation and Properties of Three-Dimensional Boron Nitride Submicron Tube/epoxy Resin Composites with High Thermal Conductivity. Polym. Compos.. 2023, 44: 3 477-3 486 J]

RIGHTS & PERMISSIONS

Wuhan University of Technology and Springer-Verlag GmbH Germany, Part of Springer Nature

PDF

0

Accesses

0

Citation

Detail

Sections
Recommended

/