Effect of Gd Addition on Hot Deformation Behavior and Microstructure Evolution of 7075 Aluminum Alloy

Abstract

In order to clarify the effect of rare earth Gd on the microstructure evolution and deformation behavior of 7075 aluminum alloy during hot compression, uniaxial compression tests of Al-Zn-Mg-Cu-0.5%Gd were conducted at strain rates of 0.001, 0.01, 0.1, and 1 s⁻¹ with the temperatures ranging from 350 to 450 °C. The microstructural evolution during deformation was characterized using optical microscopy and electron backscatter diffraction (EBSD) techniques. The experimental results indicate that the addition of the rare earth element Gd significantly increases the peak flow stress and thermal activation energy of the alloy. Due to the pinning effect of rare earth phases, dislocation movement is hindered, leading to an increased level of work hardening in the alloy. However, the dynamic recrystallization of the alloy is complicated. At a high Z (Zener-Hollomon parameter) values, recrystallization occurs in the form of DDRX (Discontinuous Dynamic Recrystallization), making it easier to nucleate at grain boundaries. As the Z value decreases gradually, the recrystallization mechanism transitions from discontinuous dynamic recrystallization (DDRX) to continuous dynamic recrystallization (CDRX). At a low Z values with the strain rate of 0.001 s⁻¹, the inhibitory effect of rare earths weakens, resulting in a comparable recrystallization ratio between Al-Zn-Mg-Cu-Gd alloy and 7075 aluminum alloy. Moreover, the average grain size of the aluminum alloy with Gd addition is only half that of 7075 aluminum. The addition of Gd provides Orowan and substructure strengthening for the alloy, which greatly improves the work-hardening of the alloy compared with 7075 aluminum alloy and improves the strength of the alloy.

Keywords

Al-Zn-Mg-Cu-Gd / hot deformation behavior / constitutive model / dynamic recrystallization / microstructure evolution

References

[1] Williams JC, Starke EA Jr. Progress in Structural Materials for Aerospace Systems[J]. Acta materialia, 2003, 51(19): 5 775-5 799

[2] Zhao Y, Li H, Liu Y, et al. The Microstructures and Mechanical Properties of a Highly Alloyed Al-Zn-Mg-Cu Alloy: The Role of Cu Con-centration[J]. Journal of Materials Research and Technology, 2022, 18: 122-137

[3] Jin NP, Zhang H, Han Y, et al. Hot Deformation Behavior of 7150 Aluminum Alloy during Compression at Elevated Temperature[J]. Materials Characterization, 2009, 60(6): 530-536

[4] Huang CC, Qi L, Chen J, et al. Effect of TiC Nanoparticles on the Hot Deformation Behavior of AA7075 Aluminum Alloy[J]. Materials Characterization, 2021, 181: 111 508

[5] Ghosh A, Ghosh M. Microstructure and Texture Development of 7075 Alloy during Homogenisation[J]. Philosophical Magazine, 2018, 98(16): 1 470-1 490

[6] Wang T, Atehortua JE, Song M, et al. Extrusion of Unhomogenized Castings of 7075 Aluminum via Shape[J]. Materials & Design, 2022, 213: 110 374

[7] Jiang B, Yi D, Yi X, et al. Effect of Trace Amounts of Added Sc on Microstructure and Mechanical Properties of 2055 Aluminum Alloy[J]. Materials Characterization, 2018, 141: 248-259

[8] Ying T, Gu L, Tang X, et al. Effect of Sc Microalloying on Microstructure Evolution and Mechanical Properties of Extruded Al-Zn-Mg-Cu Alloys[J]. Materials Science and Engineering: A, 2022, 831: 142 197

[9] Shi C, Chen XG. Effect of Zr Addition on Hot Deformation Behavior and Microstructural Evolution of AA7150 Aluminum Alloy[J]. Materials Science and Engineering: A, 2014, 596: 183-193

[10] Chen K, Tang J, Jiang F, et al. The Role of Various Zr Additions in Static Softening Behavior of Al-Zn-Mg-Cu Alloys during Interval Holding of Double-stage Hot Deformation[J]. Journal of Alloys and Compounds, 2019, 792: 1 112-1 121

[11] Ying D, Zhu XW, Lai Y, et al. Effects of Zr/(Sc+Zr) Microalloying on Dynamic Recrystallization, Dislocation Density and Hot Workability of Al-Mg Alloys during Hot Compression Deformation[J]. Transactions of Nonferrous Metals Society of China, 2023, 33(3): 668-682

[12] Che H, Jiang X, Qiao N, et al. Effects of Er/Sr/Cu Additions on the Microstructure and Mechanical Properties of Al-Mg Alloy during Hot Extrusion[J]. Journal of Alloys and Compounds, 2017, 708: 662-670

[13] Wen SP, Gao KY, Li Y, et al. Synergetic Effect of Er and Zr on the Precipitation Hardening of Al-Er-Zr Alloy[J]. Scripta Materialia, 2011, 65(7): 592-595

[14] Singh LK, Bhadauria A, Srinivasan A, et al. Effects of Gadolinium Addition on the Microstructure And Mechanical Properties of Mg-9Al Alloy[J]. International Journal of Minerals, Metallurgy, and Materials, 2017, 24: 901-908

[15] Karnesky RA, Van Dalen ME, Dunand DC, et al. Effects of Substituting Rare-Earth Elements for Scandium In A Precipitation-Strengthened Al-0.08 at.% Sc Alloy[J]. Scripta Materialia, 2006, 55(5): 437-440

[16] Zhai F, Wang L, Gao X, et al. Study on Phases Formation and Modification Ability of Rare Earth Elements La, Ce, Sm and Er in Al-Zn-Mg-Cu-Zr Alloy[J]. Transactions of the Indian Institute of Metals, 2021, 74: 2 639-2 649

[17] Li W, Pan Q, Zou L, et al. Effects of Minor Sc on the Microstructure and Mechanical Properties of Al-Zn-Mg-Cu-Zr Based Alloys[J]. Rare Metals, 2009, 28: 102-106

[18] Hu HE, Zhen L, Yang L, et al. Deformation Behavior and Microstructure Evolution of 7050 Aluminum Alloy during High Temperature Deformation[J]. Materials Science and Engineering: A, 2008, 488(2): 64-71

[19] Sellars CM, McTegart WJ. On the Mechanism of Hot Deformation[J]. Acta Metallurgica, 1966, 14(9): 1 136-1 138

[20] Zener C, Hollomon JH. Effect of Strain Rate upon Plastic Flow of Steel[J]. Journal of Applied Physics, 1944, 15(1): 22-32

[21] Prasad Y, Gegel HL, Doraivelu SM, et al. Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242[J]. Metallurgical Transactions A, 1984, 15: 1 883-1 892

[22] Lin YC, Li LT, Xia YC, et al. Hot Deformation and Processing Map of a Typical Al-Zn-Mg-Cu Alloy[J]. Journal of Alloys and Compounds, 2013, 550: 438-445

[23] Yang Y, Zhang Z, Li X, et al. The Effects of Grain Size on the Hot Deformation and Processing Map For 7075 Aluminum Alloy[J]. Materials & Design, 2013, 51: 592-597

[24] Sun Y, Cao Z, Wan Z, et al. 3D Processing Map and Hot Deformation Behavior of 6A02 Aluminum Alloy[J]. Journal of Alloys and Compounds, 2018, 742: 356-368

[25] Liu W, Zhao H, Li D, et al. Hot Deformation Behavior of AA7085 Aluminum Alloy During Isothermal Compression at Elevated Temperature[J]. Materials Science and Engineering: A, 2014, 596: 176-182

[26] Zhang Z, Pan Q, Jian Z, et al. Hot Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-0.25Sc-Zr Alloy during Compression at Elevated Temperatures[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(7): 1 556-1 562

[27] Zhao J, Deng Y, Tang J, et al. Influence of Strain Rate on Hot Deformation Behavior and Recrystallization Behavior under Isothermal Compression of Al-Zn-Mg-Cu Alloy[J]. Journal of Alloys and Compounds, 2019, 809: 151 788

[28] Li JR, Xie DS, Zeng ZR, et al. Mechanistic Investigation on Ce Addition in Tuning Recrystallization Behavior and Mechanical Property of Mg Alloy[J]. Journal of Materials Science & Technology, 2023, 132: 1-17

[29] Chen Z, Zhang Q, Li Q, et al. Hot Deformation Behavior and Dynamic Precipitation Characteristics of Mg-Gd-Nd(-Sm)-Zr Alloys[J]. Journal of Materials Research and Technology, 2021, 15: 5 582-5 596

[30] Wu H, Wen SP, Huang H, et al. Hot Deformation Behavior and Processing Map of a New Type Al-Zn-Mg-Er-Zr Alloy[J]. Journal of Alloys and Compounds, 2016, 685: 869-880

[31] Wang M, Wei W, Shi W, et al. Synergistic Effect of Al3 (Er, Zr) Precipitation and Hot Extrusion on the Microstructural Evolution of a Novel Al-Mg-Si-Er-Zr Alloy[J]. Journal of Materials Research and Technology, 2023, 22: 947-957

[32] Zhang XG, Mei FQ, Zhang HY, et al. Effects of Gd and Y Additions on Microstructure and Properties of Al-Zn-Mg-Cu-Zr Alloys[J]. Materials Science and Engineering: A, 2012, 552: 230-235

[33] Lv Q, Zhang F, Wei H, et al. Effect of Rare Earth (La, Ce, Nd, Sc) on Strength and Toughness of 6082 Aluminum Alloy[J]. Vacuum, 2023: 112 333

[34] Huang KE, Logé RE. A Review of Dynamic Recrystallization Phenomena in Metallic Materials[J]. Materials & Design, 2016, 111: 548-574

[35] Zhu Y, Cao Y, Liu C, et al. Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress during Hot Deformation of Alloy 925[J]. Materials Today Communications, 2020, 25: 101 329

[36] Cao Y, Di H, Zhang J, et al. An Electron Backscattered Diffraction Study on the Dynamic Recrystallization Behavior of a Nickel-Chromium Alloy (800H) during Hot Deformation[J]. Materials Science and Engineering: A, 2013, 585: 71-85

[37] Li H, Huang Y, Liu Y. Dynamic Recrystallization Mechanisms of As-Forged Al-Zn-Mg-(Cu) Aluminum Alloy during Hot Compression Deformation[J]. Materials Science and Engineering: A, 2023, 878: 145 236

[38] Raja N, Daniel BSS. Microstructural Evolution of Al-7.3Zn-2.2Mg-2Cu (Al7068) Alloy in T6 Condition during Isothermal Compression Using 3-Dimensional Processing Map[J]. Journal of Alloys and Compounds, 2022, 902: 163 690

[39] He D, Xie H, Lin YC, et al. Microstructure Evolution Mechanisms and a Physically-Based Constitutive Model for An Al-Zn-Mg-Cu-Zr Aluminum Alloy during Hot Deformation[J]. Journal of Materials Research and Technology, 2023, 26: 4 739-4 754

[40] Jia Y, Cao F, Guo S, et al. Hot Deformation Behavior of Spray-Deposited Al-Zn-Mg-Cu Alloy[J]. Materials & Design, 2014, 53: 79-85

[41] Pei Y, Yuan M, Wei E, et al. Effects of Sm Element Addition on The Workability and Microstructure Evolution of Mg-Gd-Y-Zr Alloy during Hot Deformation[J]. Materials & Design, 2023, 230: 111 962