Process Parameters Optimization of Laser Cladding for HT200 with 316L Coating Based on Response Surface Method

Abstract

In order to improve the sealing surface performance of gray cast iron gas gate valves and achieve precise molding control of the cladding layer, as well as to reveal the influence of laser cladding process parameters on the morphology and structure of the cladding layer, we prepared the 316L coating on HT 200 by using Design-Expert software central composite design (CCD) based on response surface analysis. We built a regression prediction model and analyzed the ANOVA with the inspection results. With a target cladding layer width of 3.5 mm and height of 1.3 mm, the process parameters were optimized to obtain the best combination of process parameters. The microstructure, phases, and hardness variations of the cladding layer from experiments with optimal parameters were analyzed by the metallographic microscope, confocal microscope, and microhardness instrument. The experimental results indicate that laser power has a significant impact on the cladding layer width, followed by powder feed rate; scan speed has a significant impact on the cladding layer height, followed by powder feed rate. The HT200 substrate and 316L can metallurgically bond well, and the cladding layer structure consists of dendritic crystals, columnar crystals, and equiaxed crystals in sequence. The optimal process parameter combination satisfying the morphology requirements is laser power (A) of 1 993 W, scan speed (B) of 8.949 mm/s, powder feed rate (C) of 1.408 r/min, with a maximum hardness of 1564.3 HV0.5, significantly higher than the hardness of the HT200 substrate.

Keywords

HT200 / laser cladding / 316L stainless steel / response surface methodology / process parameter optimization

References

[1] Zhou YX, Zhang J, Xing ZG, et al. Microstructure and Properties of Nicrbsi Coating by Plasma Cladding on Gray Cast Iron[J]. Surface & Coatings Technology, 2018, 361: 270-279

[2] H JD, Samantha S, Andrew G, et al. Property-structure-process Relationships in Dissimilar Material Repair with Directed Energy Deposition: Repairing Gray Cast Iron Using Stainless Steel 3 16l[J]. Journal of Manufacturing Processes, 2022, 81: 27-34

[3] Chen L, Song H, Guo C, et al. Corrosion and Wear Resistance of Ultrasonic Vibration-assisted Laser Cladded Fe-based Crystal/Amorphous Composite Coatings[J]. Materials Today Communications, 2024, 41: 110 377-110 377

[4] Wang J, Shen J, Shen Z, et al. Analysis of the Crack Initiation and Short Crack Propagation of Laser Cladding In718 Enduring Fretting Fatigue at 650 °C[J]. Tribology International, 2024, 194: 109 484

[5] Zhu L, Liu Y, Li Z, et al. Microstructure and Properties of Cu-Ti-Ni Composite Coatings on Gray Cast iron Fabricated by Laser Cladding[J]. Optics and Laser Technology, 2020, 122(C): 105 879-105 879

[6] Liu Y, Zhan X, Yi P, et al. Research on the Transformation Mechanism of Graphite Phase and Microstructure in the Heated Region of Gray Cast Iron by Laser Cladding[J]. Optics and Laser Technology, 2018, 100: 79-86

[7] Maximilian K, Adriano S, Karin G, et al. Coaxial Laser Cladding of Cobalt-base Alloy Stellite™ 6 on Grey Cast Iron Analysis of the Microstructural and Mechanical Properties Depending on the Laser Power[J]. Journal of Materials Engineering and Performance, 2022, 32(8): 3 821-3 838

[8] Wei R, Mao M, Liang J, et al. Study of the Effect of Overlap Rate on the Failure form, Microstructure and Wear Resistance of Multilayer Laser Cladding on Grey Cast Iron Surfaces[J]. Tribology International, 2024, 194: 109 568

[9] Yi P, Zhan X, He Q, et al. Influence of Laser Parameters on Graphite Morphology in the Bonding Zone and Process Optimization in Gray Cast Iron Laser Cladding[J]. Optics and Laser Technology, 2019, 109: 480-487

[10] G SR, Z Y, C LJ, et al. Using Response Surface Methodology (rsm) to Optimize the Key Laser Processing Parameters for Laser Cladding of Grey Cast Iron[J]. Lasers in Engineering, 2021, 51(1–5): 75-95

[11] Li Y, Dong S, Yan S, et al. Elimination of Voids by Laser Remelting During Laser Cladding ni Based Alloy on Gray Cast Iron[J]. Optics and Laser Technology, 2019, 112: 30-38

[12] Akash V, Jyoti M. Parametric Investigation of Laser Assisted Cladding Process: A Review[J]. Materials Today: Proceedings, 2021, 44(P1): 1 828-1 832

[13] Barış Ş, Oktay Ç, Celalettin Y. Effects of Process Parameters on Surface Quality and Mechanical Performance of 316L Stainless Steel Produced by Selective Laser Melting[J]. Optik, 2023, 287: 171050

[14] Chen C, Zeng X, Wang Q, et al. Statistical Modelling and Optimization of Microhardness Transition Through Depth of Laser Surface Hardened AISI 1045 Carbon Steel[J]. Optics and Laser Technology, 2020, 124: 105 976-105 976

[15] Liao M, Sun H, Huang K, et al. Cutting Performance and Failure Mechanisms of a Pure Wc Cutting Tool in Dry Cutting of Cr12Mn5-Ni4Mo3Al Stainless Steels and HT200 Grey Cast Iron[J]. Materials and Manufacturing Processes, 2017, 32(13): 1 512-1 521

[16] Masafi M, Palkowski H, Jovein HM. Microstructural Properties of Particle-reinforced Multilayer Systems of 316L and 430L Alloys on Gray Cast Iron[J]. Coatings, 2023, 13(8): 1 450

[17] Erfanmanesh M, Abdollah-Pour H, Mohammadian-Semnani H, et al. An Empirical-statistical Model for Laser Cladding of Wc-12Co Powder on AISI 321 Stainless Steel[J]. Optics and Laser Technology, 2017, 97: 180-186

[18] Shengyuan S, Jiale W, Jihao X, et al. Preparing Wc-Ni Coatings with Laser Cladding Technology: A Review[J]. Materials Today Communications, 2023, 37: 106939

[19] Zhu L, Xue P, Lan Q, et al. Recent Research and Development Status of Laser Cladding: A Review[J]. Optics and Laser Technology, 2021, 138: 106915

[20] Jian Y, Liu Y, Qi H, et al. Effects of Scanning Speed on the Microstructure, Hardness and Corrosion Properties of High-speed Laser Cladding Fe-based Stainless Coatings[J]. Journal of Materials Research and Technology, 2024, 29: 3 380-3 392

[21] Varshney R, Singh P. Optimizing of Novel Magnetic Field-assisted Electrical Discharge Turning Parameters for Machining EN24 Steel Alloy Using Response Surface Methodology and Mcdm-based Critictopsis Method[J]. Arabian Journal for Science and Engineering, 2024, (prepublish): 1–19

[22] Bellamkonda PN, Addanki R, Sudersanan M, et al. Optimization of Process Parameters of Cold Metal Transfer Arc Welding of AA 6061 Aluminium Alloy-AZ31B Magnesium Alloy Dissimilar Joints Using Response Surface Methodology[J]. International Journal of Lightweight Materials and Manufacture, 2024, 7(5): 738-752

[23] Pi H, Zhi G, Chen C, et al. Microstructure, Hardness and Corrosion Resistance of Al-TiC mmc Prepared by Laser Cladding on AZ31B Magnesium Alloy[J]. Coatings, 2024, 14(2): 211