Thermal Stability and Degeneration Behavior of Solar Selective Absorber Based on WTi-Al₂O₃ Cermet

Abstract

A WTi-Al₂O₃ cermet-based solar selective absorber was prepared to investigate the atomic diffusion induced spectral selectivity degeneration. The as-deposited coating exhibits superior absorptance (0.934) and low thermal emittance (0.098), as well as excellent thermal stability with a selectivity of 0.900/0.07 even after annealing at 923 K for 400 h in Ar ambient. However, the multilayer coating failed after being subjected to annealing at 923 K for 400 h in an air environment, as indicated by a decrease in solar absorptance to 0.912 and an increase in thermal emittance to 0.634. The microstructure characterizations reveal that the annealed coating exhibits a columnar morphology along the vertical direction of the substrate. The presence of abundant grain boundaries in the multilayer coating promotes the outward diffusion of Cr and Mn atoms in the stainless-steel substrate. The Mn atoms, in particular, possess the capability to migrate towards the surface of the coating and undergo an oxidation reaction with oxygen, facilitating the formation of a thick Mn₂O₃ layer. The roughness of the coating surface was significantly increased in this case, adversely affecting solar absorptance due to amplified sunlight reflection. In addition, the rocketing of thermal emittance is attributed to the destabilization of W infrared reflective layer during the annealing. These findings highlight the importance of considering the outward diffusion of Mn and Cr elements in the stainless-steel substrate when optimizing solar selective absorbers.

Keywords

solar selective absorber / thermal stability / spectral selectivity / optical properties

References

[1] Gong J, Li C, Wasielewski MR. Advances in Solar Energy Conversion[J]. Chemical Society Reviews, 2019, 48: 1 862-1 864

[2] Weinstein LA, Loomis J, Bhatia B, et al. Concentrating Solar Power[J]. Chemical Reviews, 2015, 115: 12 797-12 838

[3] Moon J, Lu D, VanSaders B, et al. High Performance Multi-scaled nanostructured Spectrally Selective Coating for Concentrating Solar Power[J]. Nano Energy, 2014, 8: 238-246

[4] Dan A, Barshilia HC, Chattopadhyay, et al. Solar Energy Absorption Mediated by Surface Plasma Polaritons in Spectrally Selective Dielectric-metal-dielectric Coatings: A Critical Review[J]. Renewable and Sustainable Energy Reviews, 2017, 79: 1 050-1 077

[5] Nunes C, Teixeira V, Prates ML, et al. Graded Selective Coatings based on Chromium and Titanium Oxynitride[J]. Thin Solid Films, 2003, 442: 173-178

[6] Wang X, Gao J, Hu H, et al. High-temperature Tolerance in WTi-Al₂O₃ Cermet-based Solar Selective Absorbing Coatings with Low Thermal Emissivity[J]. Nano Energy, 2017, 37: 232-241

[7] Arancibia-Bulnes CA, Estrada CA, Ruiz-Suárez JC. Solar Absorptance and Thermal Emittance of Cermets with Large Particles[J]. Journal of Physics D: Applied Physics, 2000, 33: 2 489

[8] Cao F, McEnaney K, Chen G, et al. A Review of Cermet-based Spectrally Selective Solar Absorbers[J]. Energy & Environmental Science, 2014, 7: 1 615-1 627

[9] Bhagat SK, Theodore ND, Alford TL. Thermal Stability of Tungsten-titanium Diffusion Barriers for Silver Metallization[J]. Thin Solid Films, 2008, 516: 7 451-7 457

[10] Kotilainen M, Mizohata K, Honkanen M, et al. Influence of Microstructure on Temperature-induced Ageing Mechanisms of Different Solar Absorber Coatings[J]. Solar Energy Materials and Solar Cells, 2014, 120: 462-472

[11] Berquist ZJ, Turaczy KK, Lenert A. Plasmon-Enhanced Greenhouse Selectivity for High-Temperature Solar Thermal Energy Conversion[J]. ACS Nano, 2020, 14: 12 605-12 613

[12] Kim JY, Na SI, Ha GY, et al. Thermally Stable and Highly Reflective AgAl Alloy for Enhancing Light Extraction Efficiency in GaN Light-emitting Diodes[J]. Applied Physics Letters, 2006, 88: 043 507

[13] Kim TK, VanSaders B, Caldwell E, et al. Copper-alloyed Spinel Black Oxides and Tandem-structured Solar Absorbing Layers for High-temperature Concentrating Solar Power Systems[J]. Solar Energy, 2016, 132: 257-266

[14] Cao A, Veser G. Exceptional High-temperature Stability Through Distillation-like Self-stabilization in Bimetallic Nanoparticles[J]. Nat. Mater., 2010, 9: 75-81

[15] Wang X, Luo T, Li Q, et al. High Performance Aperiodic Metal-dielectric Multilayer Stacks for Solar Energy Thermal Conversion[J]. Solar Energy Materials and Solar Cells, 2019, 191: 372-380

[16] Zhao SS, He CY, Qiu XL, et al. High-Entropy Alloy Nitride Al-Mo_0.5NbTa_0.5TiZrN_x-Based High-Temperature Solar Absorber Coating: Structure, Optical Properties, and Thermal Stability[J]. ACS Applied Energy Materials, 2022, 5: 9 214-9 224

[17] Zhao SS, He CY, Chen K, et al. Ultrabroad Wavelength Absorption in High-temperature Solar Selective Absorber Coatings Enabled by High-entropy Nanoceramic AlTiZrHfNbN for High-performance Solar-thermal Conversion[J]. Journal of Materials Chemistry C, 2022, 10: 9 266-9 277

[18] Wang X, Li K, Cheng X. Resistant Transition-metal-nitrides Based Coatings for Solar Energy Conversion[J]. Journal of the European Ceramic Society, 2021, 41: 4 076-4 085

[19] Gao J, Tu C, Liang L, et al. Silver Nanoparticles with an Armor Layer Embedded in the Alumina Matrix To Form Nanocermet Thin Films with Sound Thermal Stability[J]. ACS Applied Materials & Interfaces, 2014, 6: 11 550-11 557

[20] Gao J, Wang X, Yang B, et al. Plasmonic AgAl Bimetallic Alloy Nanoparticle/Al₂O₃ Nanocermet Thin Films with Robust Thermal Stability for Solar Thermal Applications[J]. Advanced Materials Interfaces, 2016, 3: 1 600 248

[21] Cao F, Kraemer D, Sun T, et al. Enhanced Thermal Stability of W-Ni-Al₂O₃ Cermet-Based Spectrally Selective Solar Absorbers with Tungsten Infrared Reflectors[J]. Advanced Energy Materials, 2015, 5: 1 401 042

[22] Cao F, Kraemer D, Tang L, et al. A High-performance Spectrally-selective Solar Absorber Based on a Yttria-stabilized Zirconia Cermet with High-temperature Stability[J]. Energy & Environmental Science, 2015, 8: 3 040-3 048

[23] Weertman JR. Retaining the Nano in Nanocrystalline Alloys[J]. Science, 2012, 337: 921-922

[24] Selvakumar N, Barshilia HC. Review of Physical Vapor Deposited (PVD) Spectrally Selective Coatings for Mid- and High-temperature Solar Thermal Applications[J]. Solar Energy Materials and Solar Cells, 2012, 98: 1-23

[25] Gao XH, Qiu XL, Shen YQ, et al. A Novel TiC-ZrB2/ZrB2/Al2O3 Multilayer High Temperature Solar Selective Absorbing Coating: Microstructure, Optical Properties and Failure Mechanism[J]. Solar Energy Materials and Solar Cells, 2019, 203: 110 187

[26] Liu HD, Wan Q, Xu YR, et al. Long-term Thermal Stability of CrAlO-based Solar Selective Absorbing Coating in Elevated Temperature Air[J]. Solar Energy Materials and Solar Cells, 2015, 134: 261-267

[27] Liu HD, Fu TR, Duan MH, et al. Structure and Thermal Stability of Spectrally Selective Absorber Based on AlCrON Coating for Solar-thermal Conversion Applications[J]. Solar Energy Materials and Solar Cells, 2016, 157: 108-116

[28] Liu HD, Wan Q, Lin BZ, et al. The Spectral Properties and Thermal Stability of CrAlO-based Solar Selective Absorbing Nanocomposite Coating[J]. Solar Energy Materials and Solar Cells, 2014, 122: 226-232

[29] Li P, Liu B, Ni Y, et al. Large-Scale Nanophotonic Solar Selective Absorbers for High-Efficiency Solar Thermal Energy Conversion[J]. Adv. Mater., 2015, 27: 4 585-4 591

[30] Oskooi AF, Roundy D, Ibanescu M, et al. Meep: A Flexible Free-software Package for Electromagnetic Simulations by the FDTD Method[J]. Computer Physics Communications, 2010, 181: 687-702

[31] Jublot M, Texier M. Sample Preparation by Focused Ion Beam Micro-machining for Transmission Electron Microscopy Imaging in Front-view[J]. Micron, 2014, 56: 63-67

[32] Li P, Liu B, Ni Y, et al. Large-Scale Nanophotonic Solar Selective Absorbers for High-Efficiency Solar Thermal Energy Conversion[J]. Advanced Materials, 2015, 27: 4 585-4 591

[33] Shan S, Petkov V, Prasai B, et al. Catalytic Activity of Bimetallic Catalysts Highly Sensitive to the Atomic Composition and Phase Structure at the Nanoscale[J]. Nanoscale, 2015, 7: 18 936-18 948

[34] Chen GS, Yang LC, Tian HS, et al. Evaluating Substrate Bias on the Phase-forming Behavior of Tungsten Thin Films Deposited by Diode and Ionized Magnetron Sputtering[J]. Thin Solid Films, 2005, 484: 83-89

[35] Jahangiri H, Öveçoğlu ML. Determination of Crystallite Size, Strain and Solubility in Mechanically Alloyed W-_xTi (x=0.5, 1.0, 4.0 and 10.0wt%) powder alloys[J]. Materials Letters, 2016, 178: 193-196

[36] O’Keefe MJ, Grant JT, Solomon JS. Magnetron Sputter Deposition of A-15 and Bcc Crystal Structure Tungsten Thin Films[J]. Journal of Electronic Materials, 1995, 24: 961-967

[37] O’Keefe MJ, Grant JT. Phase Transformation of Sputter Deposited Tungsten Thin Films with A-15 Structure[J]. Journal of Applied Physics, 1996, 79: 9 134-9 141

[38] Masashi Arita MA, Isao Nishida IN. Tungsten Films with the A15 Structure[J]. Japanese Journal of Applied Physics, 1993, 32: 1 759

[39] Weerasekera I A, Shah S I, Baxter D V, et al. Structure and Stability of Sputter Deposited Beta-tungsten Thin Films[J]. Applied Physics Letters, 1994, 64: 3 231-3 233

[40] Shen YG, Mai YW, Zhang QC, et al. Residual Stress, Microstructure, and Structure of Tungsten thin Films Deposited by Magnetron Sputtering[J]. Journal of Applied Physics, 2000, 87: 177-187

[41] Rossnagel SM, Noyan IC, Cabral C Jr.. Phase Transformation of Thin Sputter-deposited Tungsten Films at Room Temperature[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002, 20: 2 047-2 051

[42] Wang X, Fang W, Ma Y, et al. Thermal Stability of AlCrO Antireflection Layer for High-temperature Cermet-based Solar Selective Absorber Applications[J]. Ceramics International, 2023, 49: 38 122-38 130

[43] Wu X, You YW, Kong X S, et al. First-principles Determination of Grain Boundary Strengthening in Tungsten: Dependence on Grain Boundary Structure and Metallic Radius of Solute[J]. Acta Materialia, 2016, 120: 315-326

[44] Chookajorn T, Murdoch HA, Schuh CA. Design of Stable Nanocrystal-line Alloys[J]. Science, 2012, 337: 951-954

[45] Bahadori A, Dizaji HR, Memarian N, et al. Effect of Preparation Conditions on Physical Properties of Manganese Oxide Thin Films[J]. Journal of Sol-Gel Science and Technology, 2020, 95: 180-189

[46] Li YW, Qiao Q, Zhang JZ, et al. Influence of Post-annealing on Structural, Electrical and Optical Properties of Manganese Oxide Thin Films Grown by Atomic Layer deposition[J]. Thin Solid Films, 2015, 574: 115-119

[47] Sibin KP, John S, Barshilia HC. Control of Thermal Emittance of Stainless Steel Using Sputtered Tungsten Thin Films for Solar Thermal Power Applications[J]. Solar Energy Materials and Solar Cells, 2015, 133: 1-7

[48] Gong D, Cheng X, Ye W, et al. The Effect of Annealing Under Non-vacuum on the Optical Properties of TiALN Non-vacuum Solar Selective Absorbing Coating Prepared by Cathodic Arc Evaporation[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 28: 256-260

[49] Gong D, Liu H, Luo G, et al. Thermal Aging Test of AlCrNO-based Solar Selective Absorbing Coatings Prepared by Cathodic Arc Plating[J]. Solar Energy Materials and Solar Cells, 2015, 136: 167-171