Influences of POSS-E-GO Content on Mechanical Properties of Bio-based Epoxy/DOPO-POSS Nanocomposites

Yonggang Du , Gonghui Shi , Jiaming Wang , Yiming Wang , Xuhua Wang , Liwei Wang , Jinhui Yang , Shitong Ren

Journal of Wuhan University of Technology Materials Science Edition ›› 2022, Vol. 37 ›› Issue (4) : 765 -772.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2022, Vol. 37 ›› Issue (4) : 765 -772. DOI: 10.1007/s11595-022-2594-z
Organic Materials

Influences of POSS-E-GO Content on Mechanical Properties of Bio-based Epoxy/DOPO-POSS Nanocomposites

Author information +
History +
PDF

Abstract

The bio-based epoxy nanocomposite (GAER/DOPO-POSS) was prepared from gallic epoxy resin (GAER) and polyhedral oligomeric silsesquioxane (which containing 9,10-dihydrogen-9-oxo-10-phosphorus-phenanthrene-10-oxide groups, called DOPO-POSS). The polyhedral oligomeric silsesquioxane containing epoxy groups (E-POSS) was grafted onto aminated graphene oxide (E-GO), then the novel POSS-E-GO was obtained. The POSS-E-GO was used as modifier for GAER/DOPO-POSS nanocomposite. The influences of POSS-E-GO content on mechanical properties, dynamic mechanical properties and thermal stability of GAER/DOPO-POSS nanocomposites were determined. The experimental results show that POSS-E-GO can significantly improve the toughness of the GAER/DOPO-POSS nanocomposite. When 0.5wt% POSS-E-GO was added in GAER/DOPO-POSS nanocomposite, the impact strength of the nanocomposite was 4.74 kJ/m2 higher than that in the absence of POSS-E-GO, meantime the initial thermal degradation temperature was 277 °C.

Keywords

epoxy resin / impact resistance / nanocomposites

Cite this article

Download citation ▾
Yonggang Du, Gonghui Shi, Jiaming Wang, Yiming Wang, Xuhua Wang, Liwei Wang, Jinhui Yang, Shitong Ren. Influences of POSS-E-GO Content on Mechanical Properties of Bio-based Epoxy/DOPO-POSS Nanocomposites. Journal of Wuhan University of Technology Materials Science Edition, 2022, 37(4): 765-772 DOI:10.1007/s11595-022-2594-z

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Feng PF, Song GJ, Li XR, et al. Effects of Different “Rigid-flexible” Structures of Carbon Fibers Surface on the Interfacial Microstructure and Mechanical Properties of Carbon Fiber/Epoxy Resin Composites[J]. Journal of Colloid and Interface Science, 2021, 583: 13-23.

[2]

Chen XC, Chen SF, Xu ZJ, et al. Degradable and Recyclable Biobased Thermoset Epoxy Resins[J]. Green Chemistry, 2020, 22(13): 4187-4198.

[3]

Pansumdaeng J, Kuntharin S, Harnchana V, et al. Fully Bio-based Epoxidized Soybean Oil Thermosets for High Performance Triboelectric Nanogenerators[J]. Green Chemistry, 2020, 22(20): 6912-6921.

[4]

Tian YZ, Wang Q, Cheng J, et al. A Fully Biomass Based Monomer from Itaconic Acid and Eugenol to Build Degradable Thermosets Via Thiol-ene click Chemistry[J]. Green Chemistry, 2020, 22(3): 921-932.

[5]

Bassett AW, Honnig AE, Breyta CM, et al. Vanillin-based Resin for Additive Manufacturing[J]. Acs Sustainable Chemistry & Engineering, 2020, 8(14): 5626-5635.

[6]

Zhou X, Qiu SL, Xing WY, et al. Hierarchical Polyphosphazene@Molybdenum Disulfide Hybrid Structure for Enhancing the Flame Retardancy and Mechanical Property of Epoxy Resins[J]. Acs Applied Materials & Interfaces, 2017, 9(34): 29147-29156.

[7]

Msekh MA, Cuong NH, Zi G, et al. Fracture Properties Prediction of Clay/Epoxy Nanocomposites with Interphase Zones Using A Phase Field Model[J]. Engineering Fracture Mechanics, 2018, 188: 287-299.

[8]

Vu-Bac N, Lahmer T, Zhuang X, et al. A Software Framework for Probabilistic Sensitivity Analysis for Computationally Expensive Models[J]. Advances in Engineering Software, 2016, 100: 19-31.

[9]

Marouf BT, Mai YW, Bagheri R, et al. Toughening of Epoxy Nanocomposites: Nano and Hybrid Effects[J]. Polymer Reviews, 2016, 56(1): 70-112.

[10]

Wetzel B, Rosso P, Haupert F, et al. Epoxy Nanocomposites-fracture and Toughening Mechanisms[J]. Engineering Fracture Mechanics, 2006, 73(16): 2375-2398.

[11]

Kong QH, Wu T, Zhang HK, et al. Improving Flame Retardancy of IFR/PP Composites through the Synergistic Effect of Organic Montmorillonite Intercalation Cobalt Hydroxides Modified by Acidified Chitosan[J]. Applied Clay Science, 2017, 146: 230-237.

[12]

Mustapha R, Rahmat AR, Majid RA, et al. Vegetable Oil-based Epoxy Resins and Their Composites with Bio-based Hardener: A Short Review[J]. Polymer-Plastics Technology and Materials, 2019, 58(12): 1311-1326.

[13]

Malburet S, Di Mauro C, Noe C, et al. Sustainable Access to Fully Biobased Epoxidized Vegetable Oil Thermoset Materials Prepared by Thermal or UV-cationic Processes[J]. Rsc Advances, 2020, 10(68): 41954-41966.

[14]

Ramakrishna HV, Priya SP, Rai SK. Utilization of Granite Powder as Filler in Epoxy Phenol Cashew Nut Shell Liquid-toughened Epoxy Resin for Impact and Compression Strength[J]. Journal of Reinforced Plastics and Composites, 2006, 25(3): 227-234.

[15]

Panda R, Tjong J, Nayak SK, et al. Effect of Alkyl Phenol from Cashew Nutshell Liquid on Mechanical and Dry Sliding Wear Behavior of Epoxy Resin[J]. Bioresources, 2015, 10(3): 4126-4136.

[16]

Chrysanthos M, Galy J, Pascault JP. Preparation and Properties of Bio-based Epoxy Networks Derived from Isosorbide Diglycidyl Ether[J]. Polymer, 2011, 52(16): 3611-3620.

[17]

Sun G, Sun HG, Liu Y, et al. Comparative Study on the Curing Kinetics and Mechanism of a Lignin-based-epoxy/Anhydride Resin System[J]. Polymer, 2007, 48(1): 330-337.

[18]

Huang XJ, Yang XX, Liu H, et al. Bio-based Thermosetting Epoxy Foams from Epoxidized Soybean Oil and Rosin with Enhanced Properties[J]. Industrial Crops and Products, 2019, 139

[19]

Li YD, Jian XY, Zhu J, et al. Fully Biobased and High Performance epoxy Thermosets from Epoxidized Soybean Oil and Diamino Terminated Polyamide 1010 Oligomers[J]. Polymer Testing, 2018, 72: 140-146.

[20]

Sahoo SK, Khandelwal V, Manik G. Influence of Epoxidized Linseed Oil and Sisal Fibers on Structure-property Relationship of Epoxy Biocomposite[J]. Polymer Composites, 2018, 39(4): E2595-E2605.

[21]

Kousaalya AB, Beyene SD, Gopal V, et al. Green Epoxy Synthesized from Perilla Frutescens: A Study on Epoxidation and Oxirane Cleavage Kinetics of High-linolenic Oil[J]. Industrial Crops and Products, 2018, 123: 25-34.

[22]

Govedarica O, Jankovic M, Sinadinovic-Fiser S, et al. Optimization of the Epoxidation of Linseed Oil Using Response Surface Methodology[J]. Chemical Industry & Chemical Engineering Quarterly, 2018, 24(4): 357-368.

[23]

Omonov TS, Patel V, Curtis JM. The Development of Epoxidized Hemp Oil Prepolymers for the Preparation of Thermoset Networks[J]. Journal of the American Oil Chemists Society, 2019, 96(12): 1389-1403.

[24]

Zhang HB, Yang YP, Shen MG, et al. Soybean Oil-based Thermoset Reinforced with Rosin-based Monomer[J]. Iranian Polymer Journal, 2018, 27(6): 405-411.

[25]

De kruijff GHM, Goschler T, Beiser N, et al. Sustainable Access to Biobased Biphenol Epoxy Resins by Electrochemical Dehydrogenative Dimerization of Eugenol[J]. Green Chemistry, 2019, 21(17): 4815-4823.

[26]

Chen CH, Tung SH, Jeng RJ, et al. A Facile Strategy to Achieve Fully Bio-based Epoxy Thermosets from Eugenol[J]. Green Chemistry, 2019, 21(16): 4475-4488.

[27]

Dai J, Peng YY, Teng N, et al. High-Performing and Fire-resistant Biobased Epoxy Resin from Renewable Sources[J]. Acs Sustainable Chemistry & Engineering, 2018, 6(6): 7589-7599.

[28]

Jiang Y, Ding DC, Zhao S, et al. Renewable Thermoset Polymers Based on Lignin and Carbohydrate Derived Monomers[J]. Green Chemistry, 2018, 20(5): 1131-1138.

[29]

Aouf C, Lecomte J, Villeneuve P, et al. Chemo-enzymatic Functionalization of Gallic and Vanillic Acids: Synthesis of Bio-based Epoxy Resins Prepolymers[J]. Green Chemistry, 2012, 14(8): 2328-2336.

[30]

Du YG, Wang YM, Yu YR, et al. Preparation and Properties of Gallic Epoxy Nano-composites Modified by DOPO-POSS[J]. China Synthetic Resin and Plastics, 2019, 36(1): 12-17.

[31]

Qian XD, Song L, Yu B, et al. Novel Organic-inorganic Flame Retardants Containing Exfoliated Graphene: Preparation and Their Performance on the Flame Retardancy of Epoxy Resins[J]. Journal of Materials Chemistry A, 2013, 1(23): 6822-6830.

[32]

Wang X. Functionalization of Graphene and Its Epoxy Composites, and Study on Their Flameretardant Properties and Mechanism[D], 2013 Hefei, Anhui Province, China: University of Science and Technology of China.

[33]

Raftopoulos KN, Pielichowski K. Segmental Dynamics in Hybrid Polymer/POSS Nanomaterials[J]. Progress in Polymer Science, 2016, 52: 136-187.

[34]

Zhang WC, Li XM, Yang RJ. Pyrolysis and Fire Behaviour of Epoxy Resin Composites based on a Phosphorus-containing Polyhedral Oligomeric Silsesquioxane (DOPO-POSS)[J]. Polymer Degradation and Stability, 2011, 96(10): 1821-1832.

[35]

Yan JL, Chen GJ, Cao J, et al. Functionalized Graphene Oxide with Ethylenediamine and 1,6-hexanediamine[J]. New Carbon Materials, 2012, 27(5): 370-376.

[36]

Ma SQ, Liu XQ, Jiang YH, et al. Bio-based Epoxy Resin from Itaconic Acid and Its Thermosets Cured with Anhydride and Comonomers[J]. Green Chemistry, 2013, 15(1): 245-254.

[37]

Ma SQ, Liu XQ, Jiang YH, et al. Synthesis and Properties of Phosphorus-containing Bio-based Epoxy Resin from Itaconic Acid[J]. Science China Chemistry, 2014, 57(3): 379-388.

[38]

Xu XP, Chen S, Tang W, et al. Synthesis and Application of Uracil Derivatives as Novel Thermal Stabilizers for Rigid Poly(vinyl chloride)[J]. Polymer Degradation and Stability, 2013, 98(2): 659-665.

AI Summary AI Mindmap
PDF

120

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/