Microstructure Evolution and Its Effects on the Mechanical Behavior of Cold Drawn Pearlite Steel Wires for Bridge Cables

Abstract

The microstructure evolution and its effects on the mechanical performance of 2000 MPa bridge cable steel wires were investigated by transmission electron microscope (TEM), electron backscatter diffraction (EBSD), X-ray diffractometer (XRD) and mechanical tests. Experimental results reveal that, with the increasing strain from 0 to 1.42, a fiber structure and a <110> fiber texture aligned with the wire axis are gradually developed accompanied by cementite decomposition and the formation of sub-grains; the tensile strength increases linearly from 1 510 to 2 025 MPa, and the reduction of the area is stable with a slight decline from 44% to 36%. After annealing at 450 °C for different times, pronounced changes in the microstructure occur. Cementite lamella fragment into coarser globules corresponding to a remarkable spheroidization process, while ferrite domains recover and recrystallize, and this process is associated to modifications in the mechanical properties. Furthermore, based on the observations on dislocation lines crossing through cementite lamellae, a possible mechanism of cementite decomposition is discussed.

Keywords

pearlitic steels / cold drawing / annealing / microstructure / mechanical properties

References

[1] Zelin M. Microstructure Evolution in Pearlitic Steels During Wire Drawing. Acta Mater., 2002, 50: 4 431-4 447.

[2] Zhang XD, Godfrey A, Huang XX, et al. Microstructure and Strengthening Mechanisms in Cold-Drawn Pearlitic Steel Wire. Acta Mater., 2011, 59: 3 422-3 430.

[3] Maruyama N, Tarui T, Tashiro H. Atom Probe Study on the Ductility of Drawn Pearlitic Steels. Scripta Mater., 2002, 46(8): 599-603.

[4] Verlinden B, Driver J, Samajdar I, et al. Thermo-Mechanical Processing of Metallic Materials, 2007 Oxford: Elsevier.

[5] Zhou L C, Hu X J, Ma C, et al. Effect of Pearlitic Lamella Orientation on Deformation of Pearlite Steel Wire during Cold Drawing. Acta Metall. Sin., 2015, 51(8): 897-903.

[6] Languillaume J, Kapelski G, Baudelet B. Cementite Dissolution in Heavily Cold Drawn Pearlitic Steel Wires. Acta Mater., 1997, 45: 1 201-1 212.

[7] Gavriljuk V G. Decomposition of Cementite in Pearlitic Steel due to Plastic Deformation. Mater. Sci. Eng. A, 2003, 345: 81-89.

[8] Tarui T, Maruyama N, Takahashi J, et al. Microstructure Control and Strengthening of High-Carbon Steel Wires. Nippon Steel Tech. Rep., 2005, 91: 56-61.

[9] Lv Z Q, Jiang P, Wang Z H, et al. XRD Analyses on Dissolution Behavior of Cementite in Eutectoid Pearlitic Steel during Cold Rolling. Mater. Lett., 2008, 62(17–18): 2 825-2 827.

[10] Borchers C, Al-Kassab T, Goto S, et al. Partially Amorphous Nanocomposite Obtained from Heavily Deformed Pearlitic Steel. Mater. Sci. Eng. A, 2009, 502(1–2): 131-138.

[11] Takahashi J, Tarui T, Kawakami K. Three-Dimensional Atom Probe Analysis of Heavily Drawn Steel Wires by Probing Perpendicular to the Pearlitic Lamellae. Ultramicroscopy, 2009, 109(2): 193-199.

[12] Park J, Kim S D, Hong S P, et al. Quantitative Measurement of Cementite Dissociation in Drawn Pearlitic Steel. Mater. Sci. Eng. A, 2011, 528(15): 4 947-4 952.

[13] Cordier-Robert C, Forfert B, Bolle B, et al. Influence of Torsion Deformation on Microstructure of Cold-Drawn Pearlitic Steel Wire. J. Mater. Sci., 2008, 43(4): 1 241-1 248.

[14] Li Y J, Choi P, Borchers C, et al. Atom Probe Tomography Characterization of Heavily Cold Drawn Pearlitic Steel Wire. Ultramicroscopy, 2011, 111(6): 628-632.

[15] Zhang D, Godfrey A, Liu W. Microstructure, Ferrite Orientation and Texture Evolution of Pearlitic Steel Wire during Cold Drawing. Acta. Metall. Sin., 2010, 46: 141-146.

[16] Guo N. A Study on Microstrucutal Characterization and Mechanical Properties of Cold Drawing Pearlitic Steel Wires for Bridge Cable, 2012 Chongqing: Chongqing University.

[17] Liu Y, Jiang Q, Wang G, et al. Influence of Microstructures and Textures on the Torsional Behavior of Pearlitic Wires. Mater. Sci. Technol., 2005, 21(3): 357-360.

[18] Wang X, Ma C, Ma P, et al. Microstructure, Texture, and Hardness Evolutions of Al-Mg-Si-Cu Alloy during Annealing Treatment. J. Wuhan University of Technology-Mater. Sci. Ed., 2019, 34: 1 288-1 296.

[19] Gong D G, Fang F, Jiang J Q, et al. Oxide Scale Formation on High-Carbon Steel and Its Mechanical Descaling Property. T. Mater. Heat Treat., 2009, 30(5): 167-171.

[20] Chen W, Li L, Yang W, et al. Microstructure Evolution of Hypereutectoid Steels during Warm Deformation I. Formation of Equiaxial Ferrite and Effects of Al. Acta Metall. Sin., 2009, 45(2): 151-155.

[21] Li D, Wei Y, Song J, et al. Effect of the Heat-treatment Temperature on the Mechanical Properties and Microstructural Evolution of Cold-rolled Twinning-Induced Plasticity Steel. J. Wuhan University of Technology-Mater. Sci. Ed., 2015, 30: 386-391.

[22] Li Z, Wu D, Lü W, et al. Effect of Holding Time on the Microstructure and Mechanical Properties of Dual-Phase Steel during Intercritical Annealing. J. Wuhan University of Technology-Mater. Sci. Ed., 2015, 30: 156-161.

[23] Xiong Y, Zhao W, Sun S, et al. Evolution of Pearlite Microstructure during Warm Cross Wedge Rolling. Chin. J. Mater. Res., 2007, 21(2): 183-188.

[24] Hu X, Van Houtte P, Liebeherr M, et al. Modeling Work Hardening of Pearlitic Steels by Phenomenological and Taylor-Type Micromechanical Models. Acta Mater., 2006, 54(4): 1 029-1 040.

[25] Liang L, Xiang L, Wang Y, et al. Ratchetting in Cold-Drawn Pearlitic Steel Wires. Metall. Mater. Trans. A, 2019, 50(10): 4 561-4 568.

[26] Durgaprasad A, Giri S, Lenka S, et al. Microstructures and Mechanical Properties of As-Drawn and Laboratory Annealed Pearlitic Steel Wires. Metall. Mater. Trans. A, 2017, 48A: 4 583-4 589.

[27] Sauvage X, Copreaux J, Danoix F, et al. Atomic-Scale Observation and Modelling of Cementite Dissolution in Heavily Deformed Pearlitic Steels. Philos. Mag. A, 2000, 80: 781-796.

[28] Fang F, Zhou L, Hu X, et al. Microstructure and Mechanical Properties of Cold-Drawn Pearlitic Wires Affect by Inherited Texture. Mater. Des., 2015, 79: 60-67.

[29] Sachtleber M, Zhao Z, Raabe D. Experimental Investigation of Plastic Grain Interaction. Mater. Sci. Eng. A, 2002, 336: 81-87.

[30] Ning G, Baifeng L, Bingshu W, et al. Microstructure and Texture Evolution in Fully Pearlitic Steel during Wire Drawing. Sci. China Technol.Sci., 2013, 56: 1 139-1 146.

[31] Zhang X, Godfrey A, Hansen N, et al. Evolution of Cementite Morphology in Pearlitic Steel Wire During Wet Wire Drawing. Mater. Charact., 2010, 61(1): 65-72.

[32] Teshima T, Kosaka M, Ushioda K, et al. Local Cementite Cracking Induced by Heterogeneous Plastic Deformation in Lamellar Pearlite. Mater. Sci. Eng. A, 2017, 679: 223-229.

[33] Guziewski M, Coleman S P, Weinberger C R. Atomistic Investigation into the Mechanical Properties of the Ferrite-Cementite Interface: the Bagaryatskii Orientation. Acta Mater., 2018, 144: 656-665.

[34] Wei D, Li L, Min X, et al. Microstructure and Mechanical Properties of Heavily Cold Drawn Pearlitic Steel Wires: Effects of Low Temperature Annealing. Mater. Charact., 2019, 153: 108-114.

[35] Fand D, He F, Xie J, et al. Calibration of Binding Energy Positions with Cls for XPS Results. J. Wuhan University of Technology-Mater. Sci. Ed., 2020, 35: 711-718.