Effect of PEG Addition on the Behavior of Aluminum Sol, Dry Gel, and Film

Peijing Tian , Man Li , Jian Yuan , Weihong Zheng , Jing Wang

Journal of Wuhan University of Technology Materials Science Edition ›› 2021, Vol. 36 ›› Issue (6) : 825 -829.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2021, Vol. 36 ›› Issue (6) : 825 -829. DOI: 10.1007/s11595-021-2476-9
Advanced Materials

Effect of PEG Addition on the Behavior of Aluminum Sol, Dry Gel, and Film

Author information +
History +
PDF

Abstract

Aluminum sol, dry gel, and film were prepared by sol-gel and a dipping-withdrawing method. The effect of polyethylene glycol (PEG) on the behavior of aluminum sol, gel, and film was investigated by DLS, rotary viscometer, XRD, IR, EPMA, and light microscope, respectively. The solid gels drying at room temperature was identified as amorphous phase, and the addition of PEG nearly has no effect on the structure of aluminum dry gel. It is indicated that the sol viscosity decreases with the PEG content increasing, while the micelle size in sol decreases first then increases. The uniformity and attached particles of the film are improved to a certain extent after PEG addition. According to the analytic results, we demonstrate that the improvement is caused by low viscosity and small micelle size of sol resulting from the PEG addition.

Keywords

PEG / alumina / sol-gel / film / dipping-withdrawing

Cite this article

Download citation ▾
Peijing Tian, Man Li, Jian Yuan, Weihong Zheng, Jing Wang. Effect of PEG Addition on the Behavior of Aluminum Sol, Dry Gel, and Film. Journal of Wuhan University of Technology Materials Science Edition, 2021, 36(6): 825-829 DOI:10.1007/s11595-021-2476-9

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Zhang XJ, Ren BY, et al. Improvement in the Oxidation Resistance of Ti-6Al-4V Alloy by Sol-gel Derived Al2O3 Film[J]. High Temp. Mat. Pr-Isr., 2009, 28(4): 223-232.

[2]

Ma P, Nie W, et al. Preparation and Characterization of Polyimide/Al2O3 Hybrid Films by Sol-gel Process[J]. J. Appl. Polym. Sci., 2010, 108(2): 705-712.

[3]

Tadanaga K, Katata N, et al. Formation Process of Super-Water-Repellent Al2O3 Coating Films with High Transparency by the Sol-Gel Method[J]. J. Am. Ceram. Soc., 1997, 80(12): 3 213-3 216.

[4]

Nasu H, Hirota D, et al. Luminescent Properties of Amorphous Al2O3 Prepared by Sol-gel Method[J]. J. Ceram. Soc. Jpn., 2008, 116(1355): 835-836.

[5]

Radonjic L, Srdic V, et al. Relationship between the Microstructure of Boehmite Gels and Their Transformation to Alpha-alumina[J]. Mater. Chem. Phys., 1993, 33: 298-306.

[6]

Zhang X, Järn M, et al. Analysis of Roughness Parameters to Specify Superhydrophobic Antireflective Boehmite Films Made by the Sol-gel Process[J]. J. Eur. Ceram. Soc., 2008, 28(11): 2 177-2 181.

[7]

Tao C, Yan H, et al. Sol-gel Based Antireflective Coatings with Superhydrophobicity and Exceptionally Low Refractive Indices Built from Trimethylsilanized Hollow Silica Nanoparticles[J]. Colloid. Surface. A, 2016, 509: 307-313.

[8]

Barati N, Sani MAF, Ghasemi H, et al. Preparation of Uniform TiO2 Nanostructure Film on 316L Stainless Steel by Sol-gel Dip Coating[J]. Appl. Surf. Sci., 2009, 255(20): 8 328-8 333.

[9]

Kozuka H, Takenaka S, Tokita H, et al. PVP-assisted Sol-gel Deposition of Single Layer Ferroelectric Thin Films over Submicron or Micron in Thickness[J]. J. Eur. Ceram. Soc., 2004, 24(6): 1 585-1 588.

[10]

Alcázar JCB, Lemos RMJ, et al. Preparation, Characterization, and Biocompatibility of Different Metal Oxide/PEG-based Hybrid Coating Synthesized by Sol-gel Dip Coating Method for Surface Modification of Titanium[J]. Prog. Org. Coat., 2019, 130: 206-213.

[11]

Miki T, Nishizawa K, et al. Microstructure Control of Porous Alumina Film Using Aqueous Sol Containing Poly(Ethylene Glycol) [J]. J. Electroceram., 2008, 21: 524-527.

[12]

Wang H, Zhang Y, Ma Z, et al. Role of PEG 2000 on Sol-gel Preparation of Porous La2Ti2O7 for Enhanced Photocatalytic Activity on Ofloxacin Degradation[J]. Mat. Sci. Semicon. Proc., 2019, 91: 151-158.

[13]

Thirugnanam T. Effect of Polymers (PEG and PVP) on Sol-Gel Synthesis of Microsized Zinc Oxide[J]. J. Nanomater., 2013(6): 1–7

[14]

Du T, Wang S. Synthesis and Performance of Carbon-coated Li3V2(-PO4)3 Cathode Materials via an Oxalic Acid-based Sol-gel Route Using PEG[J]. J. Sol-Gel Sci. Techn., 2015, 74: 121-131.

[15]

Catauro M, Barrino F, et al. Chlorogenic Acid/PEG-based Organic-inorganic Hybrids: A Versatile Sol-gel Synthesis Route for New Bioactive Materials[J]. Mat. Sci. Eng. C-Mater., 2019, 100: 837-844.

[16]

Montes Ruiz-Cabello FJ, Trefalt G, et al. Electric Double-layer Potentials and Surface Regulation Properties Measured by Colloidal-probe Atomic Force Microscopy[J]. Phys. Rev. E, 2014, 90(1): 12 301-12 30110.

[17]

Bhattacharjee S. DLS and Zeta Potential — What They are and What They Are Not[J]. J. Control. Release, 2016, 235(10): 337-351.

[18]

Conroy M, Soltis JA, et al. Importance of Interlayer H Bonding Structure to the Stability of Layered Minerals[J]. Sci. Rep., 2017, 7: 13 274-1 327 410.

[19]

González-Peña V, Díaz I, et al. Thermally Stable Mesoporous Alumina Synthesized with Non-ionic Surfactants in the Presence of Amines[J]. Micropor. Mesopor. Mat., 2001, 44(1): 203-210.

[20]

Su AP, Zhou Y, Yao YH, et al. A Facile Rout to Synthesis Lamellate Structure Mesoporous Alumina Using Polyethylene Glycol 6000 (PEG, Molecular Weight = 6000) as Structure Directing Agent[J]. Micropor. Mesopor. Mat., 2012, 159: 36-41.

[21]

Rodriguez R, Flores M, et al. Master Behaviour for Gelation in Fluoride-catalyzed Gels[J]. Mater. Lett., 1992, 15: 242-247.

[22]

Arroyo R, Rodriguez R. Time Dependence of Particle Size and Particle Number of Silica Sols under Reflux Conditions[J]. J. Non-Cryst. Solids, 1992, 151: 229-235.

[23]

Rodriguez R, Arroyo R, Salinas P. Dynamic Light Scattering Studies of the Stability and Growth of Silica Particles[J]. J. Non-Cryst. Solids, 1993, 159: 73-79.

[24]

Tian P, Zhu S, et al. Crystallization and Luminescence Properties of Various Eu3+ Content Doped Al2O3 Prepared by Sol Gel Method[J]. Appl. Phys. A-Mater., 2018, 124: 7 801-7 807.

[25]

Milea CA, Ienei E, et al. Sol-gel Al2O3 Powders-matrix in Solar Thermal Absorbers[J]. J. Sol-Gel Sci. Techn., 2013, 67: 112-120.

[26]

Morterra C, Emmanuel C, et al. Infrared Study of Some Surface Properties of Boehmite (Gamma-AlO2H) [J]. J. Chem. Soc. Faraday Trans., 1992, 88(3): 339-348.

[27]

Ha TJ, Park HH, et al. A Study on the Structural and Mechanical Properties of Ordered Mesoporous Al2O3 Film[J]. Appl.Surf.Sci., 2009, 256(4): 1 073-1 077.

[28]

Mehe T, Basu AK, Ghatak S. Physicochemical Characteristics of Alumina Gel in Hydroxyhydrogel and Normal Form[J]. Ceram. Int., 2005, 31(6): 831-838.

[29]

Jing C, Zhao X, Zhang Y. Sol-gel Fabrication of Compact, Crack-free Alumina Film[J]. Mater. Res. Bull., 2007, 42: 600-608.

[30]

Cris M, Jitianu A, et al. Sol-gel Mono- and Poly-component Nanosized Powders in the Al2O3-TiO2-SiO2-MgO System[J]. J. Dispers. Sci. Technol., 2003, 24(1): 129-144.

[31]

Kiss A B, Keresztury G, Farkas L R, I.R.. Spectra and Structure of Boehmite (γ-AlOOH). Evidence for the Recently Discarded D2h 17 Space Group[J]. Spectrochim. Acta A, 1980, 36(7): 653-658.

[32]

Rajaeiyan A, Bagheri-Mohagheghi MM. Comparison of Sol-gel and Co-precipitation Methods on the Structural Properties and Phase Transformation of γ and α-Al2O3 Nanoparticles[J]. Adv. Manuf., 2013, 1: 176-182.

AI Summary AI Mindmap
PDF

140

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/