Density Dependence of Tunnel Fire Resistance for Aerogel-Cement Mortar Coatings

Abstract

Five kinds of mortars with density grades of 500, 600, 700, 800, and 900 kg/m³ were prepared. Their thermal conductivity and compressive strength were measured, and the morphological changes before and after simulated tunnel fire were observed. To investigate the fire resistance, the interfacial temperature of a 30 mm thick aerogel-cement mortar and self-compacting concrete (SCC) in a simulated tunnel fire with the maximum temperature of 1 100 °C for 2.5 h was tested and recorded. The results showed that as the density decreased, both compressive strength and thermal conductivity of the aerogel-cement mortar exhibited an exponential decrease. The effective fire resistance time of the mortar with 500, 600, 700, 800, and 900 kg/m³ for protecting SCC from tunnel fire were 97 min, 114 min, 144 min, > 150 min, 136 min, respectively. 700–800 kg/m³ was the optimum density for engineering application of tunnel concrete fireproof coating.

Keywords

aerogel-cement mortar coating / density grades / compressive strength / thermal conductivity / simulated tunnel fire resistance

References

[1] Ren R, Zhou H, Hu Z, et al. Statistical Analysis of Fire Accidents in Chinese Highway Tunnels 2000–2016. Tunnelling and Underground Space Technology, 2019, 83: 452-460.

[2] Kim S, Shim J, Rhee J Y, et al. Temperature Distribution Characteristics of Concrete during Fire Occurrence in a Tunnel. Applied Sciences, 2019, 9(22): 4 740

[3] Carvel R. A Review of Tunnel Fire Research from Edinburgh. Fire Safety Journal, 2019, 105: 300-306.

[4] Noumowe A N, Siddique R, Debicki G. Permeability of High-Performance Concrete Subjected to Elevated Temperature (600 °C). Construction and Building Materials, 2009, 23(5): 1 855-1 861.

[5] Dong X, Ding Y, Wang T. Spalling and Mechanical Properties of Fiber Reinforced High-Performance Concrete Subjected to Fire. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23(5): 743-749.

[6] Khoury G A. Effect of Fire on Concrete and Concrete Structures. Progress in Structural Engineering and Materials, 2000, 2(4): 429-447.

[7] Carabba L, Moricone R, Scarponi G E, et al. Alkali Activated Lightweight Mortars for Passive Fire Protection: A Preliminary Study. Construction and Building Materials, 2019, 195: 75-84.

[8] Landucci G, Rossi F, Nicolella C, et al. Design and Testing of Innovative Materials for Passive Fire Protection. Fire Safety Journal, 2009, 44(8): 1 103-1 109.

[9] Heo Y S, Sanjayan J G, Han C G, et al. Synergistic Effect of Combined Fibers for Spalling Protection of Concrete in Fire. Cement and Concrete Research, 2010, 40(10): 1 547-1 554.

[10] Khoury G A. Passive Protection against Fire. Tunnels and Tunnelling International, 2002, 34(11): 40-42.

[11] Troitzsch J H. Fires, Statistics, Ignition Sources, and Passive Fire Protection Measures. Journal of Fire Sciences, 2016, 34(3): 171-198.

[12] Koksal F, Gencel O, Kaya M. Combined Effect of Silica Fume and Expanded Vermiculite on Properties of Lightweight Mortars at Ambient and Elevated Temperatures. Construction and Building Materials, 2015, 88: 175-187.

[13] Ogrodnik P, Zegardło B, Szeląg M. The Use of Heat-Resistant Concrete Made with Ceramic Sanitary Ware Waste for a Thermal Energy Storage. Applied Sciences, 2017, 7(12): 1 303

[14] Wu X W, Li Z B, Shi C Q, et al. High Thermal Resistant Fireproof and Waterproof Aluminum Dihydrogen Phosphate-Expanded Perlite Composite Thermal Insulation Board. Environmental Progress and Sustainable Energy, 2018, 37(4): 1 319-1 326.

[15] Berardi U. Aerogel-Enhanced Systems for Building Energy Retrofits: Insights from a Case Study. Energy and Buildings, 2018, 159: 370-381.

[16] Cuce E, Cuce P M, Wood C J, et al. Toward Aerogel Based Thermal Superinsulation in Buildings: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 2014, 34: 273-299.

[17] Zhu P, Brunner S, Zhao S, et al. Study of Physical Properties and Microstructure of Aerogel-Cement Mortars for Improving the Fire Safety of High-Performance Concrete Linings in Tunnels. Cement and Concrete Composites, 2019, 104: 103 414.

[18] Zhu P, Xu X, Liu H, et al. Tunnel Fire Resistance of Self-Compacting Concrete Coated with SiO₂ Aerogel Cement Paste under 2.5 h HC Fire Loading. Construction and Building Materials, 2020, 239: 117 857.

[19] Asadi I, Shafigh P, Hassan Z F B A, et al. Thermal Conductivity of Concrete-A Review. Journal of Building Engineering, 2018, 20: 81-93.

[20] Sakkas K, Sofianos A, Nomikos P, et al. Behaviour of Passive Fire Protection K-Geopolymer under Successive Severe Fire Incidents. Materials, 2015, 8(9): 6 096-6 104.

[21] Formosa J, Chimenos J M, Lacasta A M, et al. Novel Fire-Protecting Mortars Formulated with Magnesium By-Products. Cement and Concrete Research, 2011, 41(2): 191-196.

[22] Li P, Wu H, Liu Y, et al. Preparation and Optimization of Ultra-Light and Thermal Insulative Aerogel Foam Concrete. Construction and Building Materials, 2019, 205: 529-542.

[23] Gao T, Jelle B P, Gustavsen A, et al. Aerogel-Incorporated Concrete: An Experimental Study. Construction and Building Materials, 2014, 52: 130-136.

[24] De Fátima Júlio M, Soares A, Ilharco L M, et al. Silica-Based Aerogels as Aggregates for Cement-Based Thermal Renders. Cement and Concrete Composites, 2016, 72: 309-318.

[25] Tanyildizi H, Coskun A, Somunkiran I. An Experimental Investigation of Bond and Compressive Strength of Concrete with Mineral Admixtures at High Temperatures. Arabian Journal for Science and Engineering, 2008, 33(2): 443

[26] Liu Z, Ding Y, Wang F, et al. Thermal Insulation Material Based on SiO₂ Aerogel. Construction and Building Materials, 2016, 122: 548-555.

[27] Kim S, Seo J, Cha J, et al. Chemical Retreating for Gel-Typed Aerogel and Insulation Performance of Cement Containing Aerogel. Construction and Building Materials, 2013, 40: 501-505.

[28] American Society for Testing Materials. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) [S]. ASTM C109, 2016

[29] China Building Industry Press. Test Method for Thermal Conductivity of Nonmetal Solid Materials-Hot-Wire 445 Method[S]. GB/T 10297-2015, 2015

[30] China Building Industry Press. Technical Specification for Applied of Self-Compacting Concrete[S]. JGJ/T 283-2012, 2012

[31] Fickler S, Milow B, Ratke L, et al. Development of High-Performance Aerogel Concrete. Energy Procedia, 2015, 78: 406-411.

[32] China Building Industry Press. Fireproof Coatings for Concrete Structure[S]. GB 28375-2012, 2012

[33] Leiva C, Vilches L F, Vale J, et al. Fire Resistance of Biomass Ash Panels Used for Internal Partitions in Buildings. Fire Safety Journal, 2009, 44(4): 622-628.

[34] Qiao R, Shao Z, Liu F, et al. Damage Evolution and Safety Assessment of Tunnel Lining Subjected to Long-Duration Fire. Tunnelling and Underground Space Technology, 2019, 83: 354-363.

[35] Savva A, Manita P, Sideris K K. Influence of Elevated Temperatures on the Mechanical Properties of Blended Cement Concretes Prepared with Limestone and Siliceous Aggregates. Cement and Concrete Composites, 2005, 27(2): 239-248.

[36] Ng S, Jelle B P, Stæhli T. Calcined Clays as Binder for Thermal Insulating and Structural Aerogel Incorporated Mortar. Cement and Concrete Composites, 2016, 72: 213-221.

[37] Stefanidou M, Papayianni I. The Role of Aggregates on the Structure and Properties of Lime Mortars. Cement and Concrete Composites, 2005, 27(9–10): 914-919.

[38] Fu Y F, Wong Y L, Poon C S, et al. Numerical Tests of Thermal Cracking Induced by Temperature Gradient in Cement-Based Composites under Thermal Loads. Cement and Concrete Composites, 2007, 29(2): 103-116.

[39] Hager I. Behaviour of Cement Concrete at High Temperature. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2013, 61(1): 145-154.

[40] Huang D, Guo C, Zhang M, et al. Characteristics of Nanoporous Silica Aerogel under High Temperature from 950 to 1 200 °C. Materials and Design, 2017, 129: 82-90.

[41] Fernández-Jiménez A, Pastor J Y, Martín A, et al. High-Temperature Resistance in Alkali-Activated Cement. Journal of the American Ceramic Society, 2010, 93(10): 3 411-3 417.

[42] Poco J F, Satcher J H Jr, Hrubesh L W. Synthesis of High Porosity, Monolithic Alumina Aerogels. Journal of Non-Crystalline Solids, 2001, 285(1–3): 57-63.