Preparation and Properties of Paraffin/PMMA Shape-stabilized Phase Change Material for Building Thermal Energy Storage

Abstract

The composite phase change material (PCM) consisting of phase change paraffin (PCP) and polymethyl methacrylate (PMMA) was prepared as a novel type of shape-stabilized PCM for building energy conservation through the method of bulk polymerization. The chemical structure, morphology, phase change temperature and enthalpy, and mechanical properties of the composite PCM were studied to evaluate the encapsulation effect of PMMA on PCP and determine the optimal composition proportion. FTIR and SEM results revealed that PCP was physically immobilized in the PMMA so that its leakage from the composite was prevented. Based on the thermo-physical and mechanical properties investigations, the optimal mass fraction of PCP in the composite was determined as 70%. The phase change temperature of the composite was close to that of PCP, and its latent heat was equivalent to the calculated value according to the mass fraction of PCP in the composite. For estimating the usability in practical engineering, thermal stability, reliability and temperature regulation performance of the composite were also researched by TG analysis, thermal cycling treatments and heating-cooling test. The results indicated that PCP/PMMA composite PCM behaved good thermal stability depending on the PMMA protection and its latent heat degraded little after 500 thermal cycling. Temperature regulation performance of the composite before and after thermal cycling was both noticeable due to its latent heat absorption and release in the temperature variation processes. The PCP/PMMA phase change plate was fabricated and applied as thermal insulator in miniature concrete box to estimate its temperature regulation effect under the simulated environmental condition. It can be concluded that this kind of PCP/PMMA shape-stabilized PCM with the advantages of no leakage, suitable phase change temperature and enthalpy, good thermal stability and reliability, and effective temperature regulation performance have much potential for thermal energy storage in building energy conservation.

Keywords

shape-stabilized phase change material / phase change paraffin / polymethyl methacrylate / temperature regulation / building energy conservation

References

[1] Khudhair AM, Farid MM. A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Material[J]. Energy Convers. Manage., 2004, 45: 263-275.

[2] Regin AF, Solanki SC, Saini JS. Heat Transfer Characteristics of Thermal Energy Storage System Using PCM Capsules: A Review[J]. Renew. Sustain. Energy Rev., 2008, 12(9): 2438-2458.

[3] Tyagi VV, Kaushik SC, Tyagi SK, et al. Development of Phase Change Materials Based Microencapsulated Technology for Buildings: A Review[J]. Renewable Sustainable Energy Rev., 2011, 15: 1373-1391.

[4] Murat K, Khamid M. Solar Energy Storage Using Phase Change Materials[J]. Renew. Sustain. Energy Rev., 2007, 11(9): 1913-1965.

[5] Tyagi Vineet V, Buddhi D. PCM Thermal Storage in Buildings: A State of Art[J]. Renew. Sustain. Energy Rev., 2007, 11(9): 1146-1166.

[6] Luo Z, Huang Z, Xie N, et al. Numerical and Experimental Study on Temperature Control of Solar Panels with Form-Stable Paraffin/Expanded Graphite Composite PCM[J]. Energy Convers. Manage., 2017, 149: 416-423.

[7] Tumirah K, Mohd ZH, Zulkarnain Z, et al. Encapsulation Techniques for Organic Phase Change Materials as Thermal Energy Storage Medium: A Review[J]. Sol. Energy Mater. Sol. Cells, 2015, 143(12): 78-98.

[8] Kaygusuz K, Sari A. Thermal Energy Storage System Using a Technical Grade Paraffin Wax as Latent Heat Energy Storage Material[J]. Energ. Sourc., 2005, 27(16): 1535-1546.

[9] Shen Q, OuY J, Zhang Y, et al. Lauric Acid/Modified Sepiolite Composite as a Form-Stable Phase Change Material For Thermal Energy Storage[J]. Appl. Clay Sci., 2017, 146: 14-22.

[10] McLauchlin R, Thomas NL. Preparation and Thermal Characterization of Poly(Lactic Acid) Nanocomposites Prepared from Organoclays Based on an Amphoteric Surfactant[J]. Polym. Degrad. Stab., 2009, 94(5): 868-872.

[11] Karamana S, Karaipekli A, Sari A, et al. Polyethylene Glycol(PEG)/ Diatomite Composite as a Novel Form-stable Phase Change Material for Thermal Energy Storage[J]. Sol. Energy Mater. Sol. Cells, 2011, 95(7): 1647-1653.

[12] Bentz DP, Turepin R. Potential Applications of Phase Change Materials in Concrete Technology[J]. Cem. Concr. Compos., 2007, 9: 527-532.

[13] Jeong S G, Chang S J, Wi S, et al. Energy Performance Evaluation of Heat-Storage Gypsum Board with Hybrid SSPCM Composite[J]. J. Ind. Eng. Chem., 2017, 51: 237-243.

[14] Lee T, Hawes DW, Banu D, et al. Control Aspects of Latent Heat Storage and Recovery in Concrete[J]. Sol. Energy Mater. Sol. Cells, 2000, 62: 217-237.

[15] Roman K K, O’Brien T, Alvey J B, et al. Simulating the Effects of Cool Roof and PCM (Phase Change Materials) Based Roof to Mitigate UHI (Urban Heat Island) in Prominent US Cities[J]. Energy, 2016, 96: 103-117.

[16] Xia Y, Zhang X S. Experimental Research on a Double-Layer Radiant Floor System with Phase Change Material under Heating Mode[J]. Appl. Therm. Eng., 2016, 96: 600-606.

[17] Auzeby M, Wei S, Underwood C, et al. Effectiveness of Using Phase Change Materials on Reducing Summer Overheating Issues in UK Residential Buildings with Identification of Influential Factors[J]. Energies, 2016, 9: 605-620.

[18] Wang W, Wang Y, Zhou XZ. Study on PE/Paraffin/Styrene-Butadiene-Styrene Triblock Polymer Phase Change Storage Composite Material[J]. China Plastic Industry, 2010, 38: 56-59.

[19] Sari A. Form-Stable Paraffin/High Density Polyethylene Composites as Solid-Liquid Phase Change Material for Thermal Energy Storage: Preparation and Thermal Properties[J]. Energ. Convers. Manage., 2004, 45: 2033-2042.

[20] Krupa I M, Luyt AS. Phase Change Materials Based on Low-Density Polyethylene/Paraffin Wax Blends[J]. Eur. Polym. J., 2007, 43: 4695-4705.

[21] Huang XH, Alva G, Liu LK, et al. Microstructure and Thermal Properties of Cetyl Alcohol/High Density Polyethylene Composite Phase Change Materials with Carbon Fiber as Shape-Stabilized Thermal Storage Materials[J]. Appl. Energ., 2017, 200: 19-27.

[22] Alkan C, Kaya K, Sarı A. Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage[J]. J. Polym. Environ., 2009, 17: 254-258.

[23] Li LP, Wang G, Guo CG. Influence of Intumescent Flame Retardant on Thermal and Flame Retardancy of Eutectic Mixed Paraffin/Polypropylene Form-Stable Phase Change Materials[J]. Appl. Energ., 2016, 162: 428-434.

[24] Lu SF, Shen TW, Xing JW, et al. Preparation and Characterization of Cross-Linked Polyurethane Shell Microencapsulated Phase Change Materials by Interfacial Polymerization[J]. Mater. Lett., 2018, 211: 36-39.

[25] Tang BT, Wang LJ, Xu YJ, et al. Hexadecanol/Phase Change Polyurethane Composite as Form-Stable Phase Change Material for Thermal Energy Storage[J]. Sol. Energy Mater. Sol. Cells, 2016, 144: 1-6.

[26] Zhou Y, Sheng DK, Liu XD, et al. Synthesis and Properties of Crosslinking Halloysite Nanotubes/ Polyurethane-Based Solid-Solid Phase Change Materials[J]. Sol. Energy Mater. Sol. Cells, 2018, 174: 84-93.

[27] Wang ZY, Situ WF, Li XX, et al. Novel Shape Stabilized Phase Change Material Based on Epoxy Matrix with Ultrahigh Cycle Life for Thermal Energy Storage[J]. Appl. Therm. Eng., 2017, 123: 1006-1012.

[28] Wang LJ, Meng D. Fatty Acid Eutectic/Polymethyl Methacrylate Composite as Form-Stable Phase Change Material for Thermal Energy Storage[J]. Appl. Energ., 2010, 87: 2660-2665.

[29] Meng D, Wang LJ. Characterization and Thermal Conductivity of Modified Graphite/Fatty Acid Eutectic/PMMA Form-Stable Phase Change Material[J]. J. Wuhan Univ. Technol., 2013, 28(3): 586-591.

[30] Meng D, Zhao K, Wang DX. Preparation and Properties of Binary Fatty Acid Mixture/Diatomite Filter Aid Form-Stable Phase Change Material[J]. Acta Mater. Composite Sin., 2018, 36(9): 2558-2565.